ELECTRICALS WORKS IN ITI WORKSHOP AT VELLORE

Amount

Re- Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil)

Renewal by Supply and fixing of LED Twin Fitting 20 W with high brightness LED fitting on wall or ceiling, with PVC unsheathed leads from terminals 2 mtr down rod to the fitting. ( Havells /Equivalent)

Renewal by supply and fixing of 34W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC usheathed copper leads from terminals to the fitting.

Renewal by supply and fixing of 1200mm (48") sweep AC Renewal by ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 2 mtr down rod with necessary clamps

Renewal by supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Renewal by Supply and fixing of 150W LED Focus light with integrated energy saving environmental friendly long life exclusive innovative cast aluminum flood light with high power LED;s as light suitable for heighten archifrrtural features of area lodging also suitable to rough serviced installations flush on the wall with suitable MS clamps ( make: Havells)

Renewal by Supply and fixing of 3 nos.6A two module socket , 1 no. 16A two module socket , 3 nos. 6A one module switch , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Renewal by Supply and fixing of 4 pole Sheet Steel enclosure Box with 32A 4 pole MCB in flush with wall with earth connection [Legrand (MDS) / Hager (L&T) make] ( CNC Machine)

Renewal by Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Renewal by Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End ( For Wall fan)

Renewal by Supply and fixing of Vertical type 4way TPN MCCB DB (Double Door type) in sheet steel enclosure in flush with wall and making good of the concealed portion with inter connection and earth connection. The MCCB DB and MCB’s should be with ISI mark (Legrand (MDS) / Hager (L&T) make) Incoming: 125A 4 pole MCCB -1no , Outgoing: 63A TP MCB - 4 nos)

Renewal by Supply and fixing of Vertical type 6way TPN MCCB DB (Double Door type) in sheet steel enclosure in flush with wall and making good of the concealed portion with inter connection and earth connection. The MCCB DB and MCB’s should be with ISI mark (Legrand (MDS) / Hager (L&T) make) Incoming: 125A 4 pole MCCB -1no, Outgoing: 32A SP MCB - 18 nos ) ( CNC maching)

Renewal by Supply and fixing of Heavy Duty Fan wall mounting of size 600mm with suitable ms clamp fixing on the wall .( Almonard)

Renewal by Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (Wall Fan)

Renewal by Supply and fixing of 63A FP MCB enclosure with 63A FPMCB in flush with wall with earth connection.

Renewal by Supply, Installation, Testing and commissioning of 10 KVA UPS system 3 phaseinput and Single phase output and as per the detailed specification enclosed, Sealed Maintenance free batteries to support 10 KVA for 2 hrs backup complete with intercell connectors & copper cables, battery stand made out of powder coated MS Angles with adeguate support to carry the load of the batteries. The vendor shall submit dimensional GA drawing of complete UPS/ Inverter system battery rack with batteries, Service panel and battery bank calculation.

Renewal by Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour

Renewal by Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire with painting of suitable colour.

Renewal by Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire with painting of suitable colour. ( Run off for Vertical DB's)

Renewal by Supply and run of 4 of 16 sq.mm (101 / 0.45 PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour.

Renewal by Supply and frxing of brass cable gland for 3 1/2x95 sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and laying of 3.5x95sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. ( Metal Work trade Wiring)

Renewal by Supply and clarnping of 3.5x95sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Renewal by Supply and providing cable end termination of 3-1/2x95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Renewal by Supply and frxing of brass cable gland for 3 1/2x120 sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and clarnping of 3.5x120sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (At Carpenty)

Renewal by Supply and laying of 3.5x120sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Renewal by Supply and providing cable end termination of 3-1/2x120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Renewal by Supply and frxing of brass cable gland for 3 1/2x50 sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and clarnping of 3.5x50sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. ( Meeting Hall)

Renewal by Supply and laying of 3.5x50sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Renewal by Supply and providing cable end termination of 3-1/2x50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Renewal by Supply and fixing of 100A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only

Renewal by Supply and erection of 315 Amps capacity dust and vermin proof cubical panel board size of 5'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a) 25 X 10 mm tinned cu. Flat for 3 phase , neutral and (b) 25 x 6mm tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection. Interconnection of bus bars : (1)315A TPN switch bus bar for Interconnection 25mmX10mm copper flat. (2)125 A TPN outgoing switch disconnector fuse units 25mm X6mm tinned cu. Flat. supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate the following switches. Incoming Switch : (1)315 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos, Outgoing Switch Switches : (2)125 A TPN outgoing switch disconnector fuse units interior only with HRC fuses double break-7 Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base. ( at Carpenty)

Renewal by Supply and erection of 200 Amps capacity dust and vermin proof cubical panel board size of 5'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a)25 x 10mm tinned cu flat for Inter connections (b) 25 x 3 mm tinned cu flat for Interconnections and earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection Interconnection of bus bars : (1)200A TPN switch bus bar for Interconnection 25mmX10mm copper flat. (2)125 A TPN outgoing switch disconnector fuse units 25mm X6mm tinned cu. Flat supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate the following switches. Incoming Switch : (1)200 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos Outgoing Switch Switches : (2)125A A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break-7 Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base. (Work Shop and Office Room )

Renewal by Supply and erection of Indoor units of 2.0 Ton capacity ( 3star Rated) Split type Airconditioner unit confirming to ISI 1301 (part-2) 1992 with amendment No.1 fitted with Hermetically sealed compressor operationon 230V 50Hz AC supply system with refrigerant gas R-22 suitable for high wallmounting evaporator and specification as under general requirement interconnection of pipes abd cable.(SR) (Make: Blue Star, Carrier, Voltas.)

Renewal by Supply and erection of 5KVA capacity Automatic Voltage stabilizer suitable to operation on 230 volts, single phase,50Hz,AC supply system with tie delay relay and High/Low voltage cut off, input voltage range 170V to 270V AC single phase, wall mounting type stabilizer with necessary clamp. (SR)(V-Guard)

Renewal by Supply and fixing of Copper pipe to connect Indoor and Outdoor units

Renewal by Supply and fixing of MS stand for fixing outdoor unit.

Renewal by Supply and fixing of water drain pipe line (1" PVC pipe)

Renewal by Supply and Installation of 2MP IP bullet Camera ,WDR 3.6 mm Fixed lens. Make:Hikvision/Eq.Model No: DCS-F4714

Renewal by Supply and installation of 32 channel Network Video recorder , H.264/MJPEG dual code decoding upto 200 Mbps incoming bandwidtht support 2 SATA HDDs up to 8 TB . Make : D-link/Eq.

Renewal by Supply and Installation of 8-port poE 2 Gigabit managed switch, which supports

Renewal by Supply and Installation of 6U wall rack, with front glass door with lock and key facilities

Renewal by Supply and Installation of 8TB built in Hard Disc Drive.Make: Seagate/Eq.

Renewal by Supply and laying of CAT6 cable in existing 1” PVC pipe .Make:D-link/Eq.

Renewal by Supply and Installation of 43' inches LED TV with following features:1. USB Input 2.HDMI Port 3.Clear audio+ 4.Motion flow XR 200 5.Full HD 1080 (Make:SONY/Eq. Model No:R252F)

Renewal by Supply and laying of 6 core outdoor OFC Cable.Make:D-Link/Eq.

Renewal by Supply and fixing of1 KVA UPS

Renewal by Supply and Installation of 10/100/1000 media converter for connecting OFC and cat6 cable. Make:D-link/Eq.

Renewal by Supply and Installation of 3600 Ansi Lumens Projector, XGA (1024X 768 ) Resolution, Contrast Ratio: 20000:1

Renewal by Supply and Installation of 8" X 6" motorized screen with remote control. Make:Liberty

Renewal by Supply and Installation of 3 feet Ceiling Mounting Kit . Make: Liberty/eq.

Renewal by Supply and laying of 3 core 1.5 sq.mm power cable with PVC pipe for projector. Make:Orbit/Eq.

Renewal by Supply and run of 2 of 1.5 sqmm Shielded copper Speaker wire

Renewal by Supply and installation of 12U Rack with Accessories

Renewal by Supply and fixing of Wall Speaker 15W

Renewal by Supply and fixing of Wired Mic

Renewal by Supply and Installation of Cordless Mic UHF

Renewal by Supply and installation of PA mixer 240 W Amplifier

Renewal by Supply and Installation of Podium as per pwd standard.

Renewal by Supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall and ceiling for earth connection

Renewal by Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Renewal by Supply and erection of 50 KVAR 415/440Volts 50Hz 3 Ph automatic power factor correction panel, 8 stage, (at 0.95 lag), made up of powder coated, 14/16 SWG CRCA sheet steel enclosure with 1 1/2" x 1 1 1/2" x 1/2" AI Frame work with RCC concreting foundation and bolted to masonry pedestal with 400A triple pole MCCB as incoming (L&T/Siemens/C&S) with Delta Connected capacitors (BCH/EPCOS) MOO Type operating in multiple stage with 3 current and Voltage Transducers (CVT) at the phases simultaneously to activate the desired power factor switching time between steps 120 seconds, switching off time in case of fault 3 seconds with a LCD display to show the following Parameters. (A)Vr – R phase Line Voltage, (B)Vy – Y phase Line Voltage, (C)Vb – B phase Line Voltage, (D)Ir – R phase Line current, (E)Iy – Y phase line current, (F)Ib – B phase Line Current, (G)KW – Present Kilo Watts, (H)RKVA – Present KVAR Demand, (I)KVA – Present KVA, (j)PF – Present Power FactorC (K)Number of Capacitor bank ON/OFFC (L)Provision to indicate the imbalanced load. Provision to indicate the change in phase Sequence. The APFC Panel Should also with built in protection For high Voltage/Low Voltage cut off, single phase Preventer in current line surge line surges, Current Limiters, Current Sensor, etc., with connection complete and as per the relevant IE Rules. Eight Stages of Automatic Power Factor control panel is necessary connection.

Renewal by Supply and fixing of 65 mm (21/2 ") GI Pipe (class 'B') of 6 mt Length with 300 mm x 300 mm x 6mm MS base plate duly welded at the bottom with concerting with construction of Masonary pedestal with suitable MS box to house the 10A DP MCB two way connector on suitable hylem sheet and supply and fixing of 1x60W LED Type street light fitting (Make : Philips /Havells )with 1 meter of 32 mm dia GI Pipe (class 'B' ) complete with necessary cowl arrangements on the above post with PVC unsheathed leads with painting of suitable colour

Renewal by Supply and fixing of brass cable gland for 4x25/16sq.mm PVC armoured LTUG cable with earth connection.

Renewal by Supply and laying of 4x16 sqmm PVC aromured LTUG cable in a trench to be excavated at a depth of 0.75mtr putting 0.15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Renewal by Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Renewal by Supply and Fixing of 7.5 HP 3/ phase Submersible pump and Electrical power supply

R SURESHMANI (BID ID -1549412)

SURESHBABU (BID ID -1549069)