Design, Supply, Installation, Testing and Commissioning of Fire Fighting System including Sprinkle System at MMABM associated Hospital of GMC Anantnag.

Amount

Design, Supply, Installation, Testing and Commissioning of Fire Fighting System (including Sprinkle System) at MMABM associated Hospital of GMC Anantnag.

A Fire Hydrant System

Supply, installation, testing & commissioning of single headed, gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with plastic cap and GI chain, twist release type plug and all accessories as per IS:5290-1983 (Type 'A').

Supply, installation, testing & commissioning of First-Aid fire hose reels wall mounting swinging type, fitted with of heavy duty mild steel construction with CI brackets, 25 mm dia. ball valve and 20 mm dia. x 36m long high pressure Hose Reel tubing as per IS:444 with Stainless Steel shut-off nozzle having 5 mm dia. orifice. The hose reel shall strictly confirm to IS:884-1985.

Providing and fixing 63mm dia 15m long non percolated rubberized fabric lined hose including gunmetal male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects, hose shall conform to IS:636 type II and coupling to IS:903-1975 (ISI marked)

Providing and placing in proper position gunmetal 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS:903).

Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.

Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT' written in front. Approximate size 2100x1200 mm.

Providing and fixing Weather proof hose cabinets for yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long hose, 1 No branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 mx 0.25 m).

Providing and fixing 4 way gunmetal fire brigade inlet breaching head as per IS:904 specification tested for 20Kg/sq-cm with 63mm dia instantaneous type inlet and 150/100mm dia flanged outlet with built in check valve for fire brigade connection to under ground tanks and fire risers including companion flanges including nuts, bolts & washers etc.

Supply, installation, testing & commissioning of Gun Metal Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 100 mm dia. GI suction pipe and 100 mm dia. 1 No. CI foot valve flanged (to be connected to static water tank).

Providing and fixing MS cabinet (to enclose above Draw-out/Fire brigade inlet connections) fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.6 m x 0.6 m x 0.45 m).

Supply, installation, testing & commissioning of pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete and of dial dia 150 mm

Supply, installation, testing & commissioning of air cushion tank (air-vessel) 250 mm dia.x1.0 m high with dished top, made of minimum 6 mm thick MS pipe/plate complete with 25 mm dia. brass air valve (ball valve, pressure gauge type), 25 mm dia brass stop cock, nipple, tees, B46 elbow, pipe and all accessories as required including fixing brackets.

B Internal Piping Supply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work.

150 mm dia

125 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

C External Piping: Supply, installation, testing & commissioning of mild steel black pipe (IS:1239/IS:3895) heavy C-class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc. including providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS:10221 complete as required.

250 mm dia

200 mm dia

150 mm dia

80 mm dia

Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 900 mm including getting out the excavated soil rubble soling, sand filling upto 3" above the pipe and then returning the soil as required in layers not exceeding 20 cms in depth including filling fine sand alround, consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, in all soils. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate of nominal size 40 mm in thrust blocks at bends, tees etc and alsos as support to vertical pipes of yard hydrants including excavation and refilling of earth work centering and shuttering for concrete complete in all respects.

D AUTOMATIC SPRINKLER SYSTEM

Supply, Installation, Testing & Commissioning of 15 mm dia. quartzoid bulb type GM Sprinkler head (K-5.6) suitable to operate at 68 degre C Standard Pendent/Upright type in brass/chrome finish.

Supply, installation, testing & commissioning of 25mm dia automatic air release valves sprinkler ring main as per standard fire practice.

Supply, installation, testing & commissioning of hydraulically Operated Alarm Check Valve 150mm dia with water alarm gong and complete with necessary fittings & supports

Providing, fixing, testing and commissiong of electrically operated flow indicating switches with threaded connection for a minimum flow of 90 lpm for indicating water flow in sprinkler branch line on each floor with necessary junction box installed in accessible place on 150/100 mm Line

Supply, installation, testing & commissioning of installation zonal control valve assembly comprising of vertical wet alarm valve, including the cost of butterfly valve, hydraulic alarm motor & gong, 15 mm dia. test valve, 50 mm dia. drain valve and all necessary trimming connections including 2 nos. pressure gauges as per manufacturer's catalogue to be installed in each floor.

Supply, installation, testing & commissioning of 25 mm dia inspecting & testing assembly with gunmetal isolation valve, gunmetal sight glass, bypass valve & connected to drain line complete (excluding the cost of drain pipe).

Supply, installation, testing & commissioning of flexible drop 25mm dia unbraided type, 1500mm long alongwith all fittings and supports with two piece escutcheon plate

Supply, installation, testing & commissioning of gun metal ball valve 50mm dia for flushing connection

Supply, installation, testing & commissioning of gun metal ball valve 25mm dia.

E FIRE PUMPS, VALVES & ACCESSORIES

Supply, Installation, Testing & Commitioning of Electrical Motor Driven Fire Pumping set (Factory Fitted) suitable for automatic operation consisting of the following as per the specifications. Providing and fixing horizontal End Suction multi stage, single outlet factory fitted pumping set with bronze impeller with gland capable of delivering 2280 LPM against a total head of 105 M with CI body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural baseplates with all pump accessories complete as per specifications including pressure gauge with gunmetal isolation valves and anti vibration pump, motor to be suitable for 415 volts, 3 phase, 50cycles A.C. supply ( specification as per fire fighting requirements and on the pattern of TAC OR LOCAL AUTHORITY APPROVAL) as per instruction of following specifications: a. Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts ±15%, 3 phase, 50 Hz AC supply of suitable capacity for the above pump coupled with flexible coupling including earthing as per relevant Indian standard & specifications. b. Common bed plate for mounting pump and motor fabricated from suitable MS Channel as per manufacturer's recommendations. c.Suitable RCC pump-foundations as per manufacturer's design and 4 nos. dunlop (cushy foot) heavy duty antivibration mounting pads.

Supply, Installation, Testing & Commitioning. Of Diesel Engine Driven Fire Pumping set (Factory Fitted) suitable for automatic operation consisting of the following as per specifications: Providing and fixing horizontal split casing multi stage, single outlet pumping set with CI body and bronze impeller & with gland capable of delivering 2280 LPM against a total head of 105 M connected by means of a flexible coupling to a water cooled diesel engine mounted on a common structural base plate with antivibration pads and and foundation complete with electric panel, battery (including one spare battery), utomatic starting arrangement exhaust pipe of required length to discharge outside building with muffer, day oil tank mounted on suitaible structural supports complete in all respects as per specifications ready for use and as per latest requirement of fire autority regularities. a) Water cooled TAC approved Diesel Engine suitable for developing at least 90 BHP (Duty point) at 2000 RPM) compatible for above pump complete with automatic starting mechanism, batteries, automatic battery charger unit, flexible coupling with the pump, fuel tank, silencer, exhaust pipe with insulation approx. 25m length & all standard accessories as required as per TAC rules including earthing, mandatory spares and tool kit. b) Common bed plate for mounting pump and engine fabricated from suitable MS Channel as per manufacturer's recommendations. c) Suitable RCC pump foundations as per manufacturer's design 8 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads.

Supply, Installation, Testing & Commitioning. of Electrical Motor Driven Automatic pressurisation (Jockey) pumping set (Factory Fitted) consisting of the following as per specifications. Providing and fixing horizontal split casing single/multi stage, single outlet pumping set with bronze impeller & with gland capable of delivering 180 LPM against a total head of 100 M with C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural baseplates with all pump accessories complete as per specifications including pressure gauge with gunmetal isolation valves and anti vibration pump, motor to be suitable for 415 volts, 3 phase, 50cycles AC supply (specification as per fire fighting requirements and on the pattern of TAC OR LOCAL AUTHORITY APPROVAL) as per instruction of following specifications: a) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts ±15% 3 phase 50 Hz AC supply of suitable capacity (approx. 10 KW) for the above pump with synchronous speed of 1500/3000 RPM confirming to IS:325 & duly coupled with above pump coupled with flexible coupling including earthling as per relevant Indian Standard and specifications. b) Common bed plate for mounting pump and motor fabricated of suitable MS channel as per manufacturer's recommendations c) Suitable RCC Pump foundations as per manufacturer's design 4 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads.

Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends from 10mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump, sprinkler pump and Jockey pump at drop of pressure, automatically at required pressure setting Recommended dia. : 450mm Height of shell : 2000mm Working pressure : 5.5 kg/cm2 Test Pressure : 10 kg/cm2

Providing, fitting of total 10000 ltr (2000 ltr x 5No.) terrace tripple layer HDPE tank with necessary connections to the Terrace pump Capacity- 2000ltr

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 5.5 kg/cm2 and test pressure 10.0 kg/cm2 with unit control. 80mm dia.

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 5.5 kg/cm2 and test pressure 10.0 kg/cm2 with unit control. 100mm dia.

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 5.5 kg/cm2 and test pressure 10.0 kg/cm2 with unit control. 150mm dia.

Providing and fixing CI double flanges Y suction strainer (PN 2.0) “Y” type including, nuts, bolts and 3mm thick rubber insertion complete. 100mm dia.

Providing and fixing CI double flanges Y suction strainer (PN 2.0) “Y” type including, nuts, bolts and 3mm thick rubber insertion complete. 150mm dia.

Providing and fixing CI double flanges Y suction strainer (PN 2.0) “Y” type including, nuts, bolts and 3mm thick rubber insertion complete. 200mm dia.

Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) 50mm dia nominal bore.

Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) 65mm dia nominal bore.

Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) 80mm dia nominal bore.

Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) 100mm dia nominal bore.

Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) 150mm dia nominal bore.

Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) 200mm dia nominal bore.

Providing and fixing CI double flanged horizontal/ vertical type non-return valve including nuts, bolts, 3mm thick rubber insertions complete to IS:5312, part-I, swing type, class PN 1.6. 65mm dia nominal bore.

Providing and fixing CI double flanged horizontal/ vertical type non-return valve including nuts, bolts, 3mm thick rubber insertions complete to IS:5312, part-I, swing type, class PN 1.6. 80mm dia nominal bore.

Providing and fixing CI double flanged horizontal/ vertical type non-return valve including nuts, bolts, 3mm thick rubber insertions complete to IS:5312, part-I, swing type, class PN 1.6. 100mm dia nominal bore.

Providing and fixing CI double flanged horizontal/ vertical type non-return valve including nuts, bolts, 3mm thick rubber insertions complete to IS:5312, part-I, swing type, class PN 1.6. 150mm dia nominal bore.

Providing, fixing, testing and commissiong of standard mild steel puddle flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as per IS 6392 table E. 200mm dia.

Providing, fixing, testing and commissiong of standard mild steel puddle flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as per IS 6392 table E. 150mm dia.

Providing, fixing, testing and commissiong of standard mild steel puddle flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as per IS 6392 table E. 100mm dia.

Providing, fixing, testing and commissiong of standard mild steel puddle flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as per IS 6392 table E. 80mm dia.

Providing, fixing, testing and commissiong of standard mild steel puddle flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as per IS 6392 table E. 65mm dia.

Providing and fixing of sluice valve of 1.6 PN rating flanged at both ends of following sizes including necessary nuts, bolts, gaskets etc. complete (without gear box) 150mm dia nominal bore.

Providing earthing station with GI Earthing Plate (600mm x 600mm) 8 mm thick for pumps and MCC panels including excavation, CI manhole cover and frame complete as per specifications and IE rules.

GI Strip of size 25 x 6 mm G

Providing and fixing pressure switch (for operation at 0-25 kg/cm2) with required fittings and accessories complete.

Structural Steel like angles, channels etc at various locations for supporting Tanks, Valves etc

Providing and fixing liquid level controller for fire pump to cut off in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning.

P/F of electrical cables from main control panel to outdoor units as per sizes: 4 core, 35 sq.mm copper cable.

4 core 35 sq. mm copper cable.

3 core 16 sq. mm copper cable.

2000mm width x 50mm depth x 2mm thick perforted M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S suspenders and including painting etc. as required

Providing and fixing of fire bucket stands for 6 No Buckets at designated locations

Providing and fixing of fire buckets of 9 Litre capacity to the stands

Supply and fixing of illuminated Fire exit signages. This sign may be used to Indicate all exits which can be used in the event of an emergency. It shall be accompanied: by an arrow as per IS-12349(1988) standards

ZOON ENGINEERING TRADERS (BID ID -2062286)

Lyra Engineering Services (BID ID -2062792)