Construction of Auditorium Hall in Dr. Radha Krishanan Govt. Medical College Hamirpur at Jole Sappar.

Supplying and Fixing Auditorium Chair. SEAT ASSEMBLY: The seat should be made of Polyurethane Foam moulded with 1.5 ±0.1cm(one point five plus minus zero point one centimetre). thick plywood insert arid upholstered with fabric. * Approx. Seat Size: Depth: 42.0cm(forty two point zero centimetre). Width @ rear: 44.0cm(forty four point zero centimetre). Width @ front: 41.0cm(forty one point zero centimetre). BACKREST ASSEMBLY: The back assembly should be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and upholstered with fabric and back cover. The insert should be made of 01.9 ±0.02cm x 0.16 ± 0.128cm.(zero one point nine plus minus zero point zero two centimetre into zero point sixteen plus minus zero point one two eight centimetre) thick MS tubular frame with flexible nylon straps running across the length and width of the frame. * Approx. Back Size: Height: 65.5cm(sixty five point fivecentimetre). Width @ top: 34.5cm(thirty four point five centimetre). Width @ seat level: 46.0cm(forty six point zero centimetre). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +12 kg/m3 (forty five plus twelve kilogramme per cubic metre). OLYURETHANE FOAM: The Polyurethane foam should be moulded with density = 45 ±12 kg/cum (forty five plus twelve kilogramme per cubic metre). COVERS: The back cover and mechanism cover should be vacuum formed from black ABS sheets. ARMREST ASSEMBLY: The Armrest understructure should be upholstered PU foam moulded with MS insert. Arm tops should be made of black Integral Skin polyurethane with 50-70(fifty to seventy) Shore 'A' Hardness & reinforced with wooden insert. Armrest width = 7.0 ±0.5cm (seven point zero plus minus zero point five centimetre) and should be offered as common / dividual armrest between chairs. UNDERSTRUCTURE: • MS black powder coated ( DFT 40-60(forty to sixty) microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not should be use. • Footprint should be a of base plate: made of HR steel 15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm(fifteen point zero plus minus zero point two centimetre into twenty two point zero plus minus zero point two centimetre into zero point five plus minus zero point zero five centimetre) thick. • Backrest supporting beam width: 46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm (forty six point zero plus minus zero point two centimetre (length) into eight point zero plus minus zero point zero three centimetre into four point zero plus minus zero point zero three centimetre into zero point two plus minus zero zero point one six centimetre) MS tube. • Understructure fixed to ground by anchors with washer and nut. FLOORING PRE - REQUIRED should be ITE : The auditorium chair should be designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requshould be ite Godrej doc-no: STG 129368. Overall Dimensions of Chair Seat Height - 46.5 cm(forty six point five centimetre). Height - 89.0 cm(eighty nine point zero centimetre), Width & Depth of Chair Width(Individual)-60.0cm(sixty point zero centimetre),Width(Common) - 53.0 cm(fifty thre point zero centimetre) .and Depth(normal) 69.0 cm(sixty nine point zero centimetre) .(normal) , Depth(seat folded)- 54.0 cm(fifty four point zero centimetre) as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying and Fixing 3(three) Seater Sofa having size 2040 x 960 x 970mm( two thousand forty into nine hundred sixty into nine hundred seventy millimetre) Upholstery : • Material : Syn Leather • Thickness : 1 mm(one millimetre) Frame : • Material : Pine Wood, Moisture content : 10 - 12 % (ten to twelve percent), Thickness of Plywood used : 12 mm & 18 mm (twelve millimetre and eighteen millimetre) Seat Foam : • Material : Slab stock, Density : 32 kg/m3(thirty two kilogramme per cubic metre) Pocket Spring embedded at seat for bounciness and sinking feeling Back Foam : • Material : Slab Stock, Density : 28 kg/m3(twenty eight kilogramme per cubic metre) Webbing : • Material : Nylon, Thickness : 2 mm(two millimetre) Legs : • Material : PVC with 4 mm(four millimetre) bush as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying and Fixing 2(two) Seater sofa having size 1510 x 960 x970mm (one thousand five hundred ten into nine hundred sixty into nine hundred seventy millimetre) Upholstery : • Material : Syn Leather • Thickness : 1 mm (one millimetre) Frame : • Material : Pine Wood, Moisture content : 10 - 12 %(ten to twelve percent), Thickness of Plywood used : 12 mm & 18 mm(twelve millimetre and eighteen millimetre) Seat Foam : • Material : Slab stock, Density : 32 kg/m3(thirty two kilogramme per cubic metre) Pocket Spring embedded at seat for bounciness and sinking feeling Back Foam : • Material : Slab Stock, Density : 28 kg/m3 (twenty eight kilogramme per cubic metre) Webbing : • Material : Nylon, Thickness : 2 mm(two millimetre) Legs : • Material : PVC with 4 mm(four millimetre) bush as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying and Fixing side table having size 60 x 45 x 60cm (sixty into forty five into sixty centimetre) Material : 18 mm(eighteen millimetre) prelaminated particle board with 10 mm(ten millimetre) thick toughed glass Shade : Black Construction : Knock down Finish : 1) MIP lamination in Black ink shade with matching lipping in Matt finish 2) Digitally printed glass which is matching with PLT as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying and Fixing VIP 3(three) Seater sofa having size 1960 x 875 x 800 mm (one thousand nine hundred sixty into eight hundred seventy five into eight hundred millimetre) Understructure is made up of Pinewood and Ply. Pinewood used are without major knots and defects on the surface. Seat is made of slab stock foam with density 28 kg/m3 & 18 kg/m3 (twenty eight kilogramme per cubic metre and eighteen kilogramme per cubic metre) Backrest is made of slab stock foam with density 28 kg/m3(twenty eight kilogramme per cubic metre) Backrest cushion is made of slab stock foam of density 25 kg/m3(twenty five kilogramme per cubic metre) with a layer of recron sheet of 400 gsm(four hundred grams per square metre) as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and supplying VIP 2(two) Seater sofa having size 1482 x 875 x 800 mm(one thousand four hundred eighty two into eight hundred seventy five into eight hundred millimetre) Understructure is made up of Pinewood and Ply. Pinewood used are without major knots & defects on the surface. Seat is made of slab stock foam with density 28 kg/m3 & 18 kg/m3 (twenty eight kilogramme per cubic metre and eighteen kilogramme per cubic metre) Backrest is made of slab stock foam with density 28 kg/m3(twenty eight kilogramme per cubic metre) . Backrest cushion is made of slab stock foam of density 25 kg/m3(twenty five kilogramme per cubic metre) with a layer of recron sheet of 400 gsm (four hundred grams per square metre) as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying and Fixing VIP 1(one) Seater sofa having size 950x875x800 mm(nine hundred fifty into eight hundred seventy five into eight hundred millimetre) Understructure is made up of Pinewood and Ply. Pinewood used are without major knots & defects on the surface. Seat is made of slab stock foam with density 28 kg/m3 & 18 kg/m3 (twenty eight kilogramme per cubic metre and eighteen kilogramme per cubic metre) Backrest is made of slab stock foam with density 28 kg/m3(twenty eight kilogramme per cubic metre) . Backrest cushion is made of slab stock foam of density 25 kg/m3(twenty five kilogramme per cubic metre) with a layer of recron sheet of 400 gsm (four hundred grams per square metre) as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying and Fixing Corner Table having size 400 mm dia X 500mm height(four hundred millimetre dia into five hundred millimetre height) Top : Mango Wood Understructure : Mango Wood Some pieces don’t just occupy space—they command it. This set makes a bold visual statement with its striking circular form, meticulously crafted in solid wood and finished in a rich, deep black stain. Its presence is powerful yet refined, radiating a quiet confidence that anchors the room. as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.