SPECIAL REPAIRS TO OR MD ACCN BLDG NO T 24 01 TO 06 QTRS AT KHETARPAL COLONY NAPIER LINE WOODEN JOINERY AT MILITARY DENTAL CENTRE AND PROVN OF DEFI ELECTRIC GEYSER IN SINGLE JCO ACCN AT CDM SECUNDERABAD UNDER GE NORTH SECUNDERABAD

Amount

Demolition of brick work or stone boulders masonry built in Cement Mortar (or) cement lime mortar including all quions, arches, pillars etc complete all as specified and as directed.

Dismantling AC sheet corrugated or semi corrugated etc sheets in roof covering complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in sections in any position unframed work complete all as specified and as directed.

M&L for cutting chases in making good to facing where required and pointing in CM 1:3 to ends or edge of landings, steps, sills, sun shades, shelves, lintels etc and making good cutting exceeding 10cm but not exceeding 20cm to stone walling complete all as specified and as directed.

M&L for providing Cement concrete in lintels upto 1.5m span, cills, copings, bed plates etc including necessary form work type B1 1:2:4 (using 20mm graded stone aggregate) complete all as specified and as directed.

M & L for PCC type C1 1:3:6 ((using 20mm graded stone aggregate) as in eaves filling complete all as specified and as directed.

M & L roof trusses (framed) trussed purlins, rails and fastenings and heavy bracket framing (beams, tees, angle, channel or flat section) including distance pieces, cleats etc Gde confirming to Fe-410 W.Gde E-250, Quality ' A ' complete all as specified and as directed.

Dismantling ceiling of any description including cover fillets complete all as specified and as directed.

S & F 605 X 605mm anodised aluminium snap grid framed work for false ceiling all as specified including 4mm thick non asbestos fibre cement bldg boards inserted aluminium frame work with screws and three coats of white wash on ceiling complete all as specified and as directed.

S & F MS rolled section as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates conforming to Fe-410-W.Gde E-250, Quality ' A ' complete all as specified and as directed.

S & F pre painted gal valume aluminum Zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S & F pre painted gal valume aluminum Zinc coating GI based plain steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in ridge, gutters etc fixed with self tapping screws complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on brick masonry surfaces or concrete surfaces in CM 1:6 including finished the surface smooth and even wihtout using extra cement complete all as specified and as directed.

M&L for rendering 05 mm thick on ceillings in CM (1:3) and finishing surface even and smooth without using extra cement etc in patches, area not exceeding 3 sqm in each patch complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 300x300mmx 7 to 8mm thick (square or rectangular) area of eahc tile exc 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and ponted in white cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300x200mmx 7mm thick in vertical surfaces set and jointed in neat cement slurry and painted in white cement to match complete all as specified and as directed.

M&L for screed bed or bedding layer of cement mortor 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for rendering 10mm thick on brick/stone walls in CM 1:4 as backing coat of tiles complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on steel surfaces of any description over 10cm width or grith including preparation of new surfaces and applying one coat of Red oxide primer complete all as specified and as directed.

S&F pressed steel frame of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for PCC 1:2:4 (using 12.5 mm graded stone aggregate as mass concrete filling in hollow portion of the door frames complete all as specified and as directed.

Dismantling wrought iron or mild steel work and structual steel work of any description complete all as specified and as directed.

M&L for MS framed work as in doors and chowkats or gates of angles or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings (exclusive of steel sheeting or other covering) of grade Fe-410-w Gde-250 ,Quality ' A ' complete all as specified and as directed.

S&F 0.80mm thick, mild steel plain black sheeting as covering to door shutters and similar work, cut to size, edges beaded if directed, holes punched, including riveting or welded to steel members etc with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles stopped ends, outlets etc as required complete all as specified and as directed.

S&F framed work such as grills framed guard bars etc with end of bars shouldered riveted or angle into spikes framed guard bars ,and similar work conforming to grade Fe 290-0 Gde -E -165 complete all as specified and as directed.

S&F Steel windows with side hung double shutter (glazed shutter open out side and wire mesh shutter open inside) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F MS Sliding door bolts 300mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a min 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and as directed.

S&F aluminium alloy,300 mm long anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for applying two coats of synthetic enamelled paint over a coat of pink primer over wood & wood based materials of any description, not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

M&L for 18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws including clean sawn fillets exc 13sqcm and not exc 25sqcm and 3mm thick teak wood lipping and dismantling old boarding as in cup board shutters and shelves complete all as specified and as directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces with two coats, firs coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 including finished the surfaces smooth and even without using extra cement including mixing water proofing compound as per manufacturers instruction complete all as specified and as directed. Note: Water Proofing Compound will be measured and paid separately.

Supply only intergal water proofing compound complete all as specified and as directed.

M & L for 75mm thick cement concrete type B1 by using 20mm graded stone aggregate 1:2:4 as in paths etc laid in pannels including finished surface smooth and even without using extra cement complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and as directed.

M & L for machine cut cuddapa stone slab 20-25mm thick over Cement screed bed of 20mm thick in 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over kitchen plat form, shelves etc complete all as specified and as directed.

M&L for Granite (of any type) stone slab 20 mm thick over cement screed bed 20mm thick 1:6 in floors or on cooking platforms etc, set , jointed pointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing & polishing complete including dismantling complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on wooden surface of any description over 10cm width or grith including preparation of old painted surface complete all as specified and as directed.

M & L two coats of white wash on walls including preparation of old surfaces complete all as specified and as directed.

M & L three coats of white wash on walls including preparation of new surfaces complete all as specified and as directed.

M&L for preparing new plastered or unplastered ceiling surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for Non skid ceramic coloured joints free tiles 7 to 8 mm thick area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over screed bed of 15mm thick in 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured joints free tiles 7 to 8 mm thick area of each tile exceeding 0.11 but not exceeding 0.18 sqm in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over a backing coat of 10mm thick in 1:4 complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavingnot exceeding 15cm thickness (below & above ground level) complete all as specified and as directed.

M&L for rough shahabad stone flooring bedded in CM 1:6 20mm thick (min) jointed and pointed in CM 1:3 thickness of stone slab varrying from 20 to 30mm complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (40mm graded aggregate) 75mm thick as in sub base complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and as directed .

S&F in repairs viterious china squatting pan orissa pattern of size 580x440mm white integral foot resta & including supply & fixing10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete all as specified and as directed.

S & F in repairs, vitreous china wash basin, white, flat back of size 550x400mm with brackets, including cutting for & pinning in ends of brackets, including waste fitting, PTMT 32mm dia complete with CP pillar tap 15mm bore complete all as specified and as directed.

Taking up & down steel tubing & connections including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed.

Taking up & down steel tubing & connections including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed.

S&F 15mm dia steel water tubing medium grade galvanised with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and as directed.

S & F 20mm dia. steel water tubing 'medium grade' galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and as directed.

S&F in repairs 15mm bib taps, Chromium plated cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and as directed.

S & F in repairs gun metal gate valves 20mm bore with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 15 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.

S&F in repairs 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( Minimum weight 210 grms ) complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6m mean radins built in cement mortar 1:6 complete all as specified and as directed.

M & L for brick work with fly ash brick straight or curved on plan to any radiouses in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

M & L for MS TMT bars of 8mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annaeled) not lessthan 0.90mm dia or securing with clips complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqn each complete all as specified and as directed.

All as per item No 65 above but area exceeding 1.5 Sq.m but not exceeding 4 Sqm each complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and complete all as specified and as directed.

S&F 2nd class Hard Wood 35mm thick Glased and Skeleton shutter open Rebeted and prepared to receive glass, guage etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass guage etc size of member of shutter as specified in SSR Part I section - 8 complete all as specified and as directed.

S & F butt hinges 100mm long heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick Figured glass, pin headed type and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed with galvanised wire staples complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

M & L for providing pre cast cement concrete in landings, cover slabs, chajjas, water troughs, shelves and similar articles type B-1 1:2:4 20mm graded stone aggregate set in CM 1:4 complete all as specified and as directed.

Dismantling and breaking up drain pipes (AC or reinforced concrete of any description any dia complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board mede out of 1.00mm thick sheet for kitchen or laboratory with plug, washres waste pipe cast iron cantiliver brackets connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls./ laid in floors complete all as specified and as directed.

All as per item No 81 above but 75mm bore complete all as specified and as directed.

S & F in repairs PTMT shower rose of any colour for fixing with 15mm pipe minimum weight 40 gms complete all as specified and as directed.

S & F PVC (SWR) bends any radius 75mm complete all as specified and as directed.

S & F 110mm dia., PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repairs PVC waste pipe for sink/WHB LDPE Pipes 32 mm dia complete all as specified and as directed.

S & F in repairs PVC (SWR) bends of any radius 75mm bore provided with access door complete all as specified and as directed.

S & F in repairs PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specified and as directed.

Supply & fixing in repair PVC (SWR) vent cowls 110mm dia complete all as specified and as directed.

Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.

S & Fixed in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 complete all as specified and as directed.

S & F in repairs 10 liters capacity PVC low level flushing cistern including brackets complete all as specified and as directed.

M&L for applying two coats of cement base paint including preparation of newly plastered wall surfaces complete all as specified and as directed.

M&L for two coats of cement based paint including complete removal of existing treatment on wall surfaces complete all as specified and as directed.

M&L for preparing new surfaces of walls and application of putty (any number of coats including smoothening using abrasive paper etc.) and applying two coats of distemper oil emulsion over a coat of chalk whiting primer complete all as specified and as directed.

S&F in repairs Aluminium Tubular towel rail of 20mm dia complete all as specified and as directed.

S&F in repairs Aluminium Tubular towel rail bracket of 20mm dia complete all as specified and as directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.

M&L for applying one coats of synthetic enamelled paint over steel and iron surfaces of any description, not other wise described over 10 cm width or girth including preparation of old surfaces complete all as specified and as directed.

S&F Continuous (piano) hinges mild steel bright finish width of flaps 30 mm complete all as specified and as directed.

S&F40 mm MS cup board nobs fixed with nut and screw complete all as specified and as directed.

S&F MS Stove enamelled black hasp and stapple 150 mm long fixed with screws complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0Sqm but not exceeding 2.0sqm each complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as requireea superficial area exceeding 150 sqcm but not exceeding 400 sqcm complete all as specified and as directed.

Taking down shutters of any description not exceeding 1Sqm each complete all as specified and as directed.

M&L for forming jambs, etc. to openings (to foregoing toothing and properly bonding into old work,also facing, jointing and pointing to match existing work, complete in cement mortar 1:4 complete all as specified and as directed.

S&F standard aluminum anodized powder coated sections of any Type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles,door stoppers, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directed. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet /particle baord only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for not exceeding 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and as directed.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exceeding 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and as directed.

Supply only 4mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed.

Supply only for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and as directed.

S&F machine cut and machine polished, green marble, 18-20mm thick in single piece as in double stepping on horizontal or vertical surface,as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including backing coat of rendering 10 mm thick in CM 1:4 complete all as specified and as directed.

S&F for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed in aluminium windows complete all as specified and as directed.

S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia, complete all as specified and as directed.

S&F in repair bracket aluminium powder coated (fancy type) for 20 mm dia tubular curtain rod(for item above) complete all as specified and as directed

M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of primer over 3mm thick birla wall care putty etc complete all as specified and as directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and as directed.

M&L for preparation of wood surface, treating the back of chowkhat, end of post etc with coal tar black paint area tarred exceeding 0.1 Sqm but not exceeding 0.5 sqm each complete all as specified and as directed.

M&L for treating small articles such as hold fasts, ends of posts, backs of chowkats etc area not exceeding 0.10Sqm each with coal tar black paint complete all as specified and as directed.

S&F Stainles steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, or galvanised wire staples complete all as specified and as directed.

S & F 150mm long aluminium handles, cast type anodised extruded section and fixed complete all as specified and as directed.

S & F aluminium anodized barrel tower bolt of extruded section of size 150 mm long complete all as specified and as directed.

S& F Door closer hydraulically regulated,designation No. 3,universal type, Aluminium extruded section body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm size complete all as specified and as directed.

S & F aluminium butt hinges, 100mm size extruded brass, with mild steel hinge pin, bright polished, type B-21 complete all as specified and as directed.

S&F in repairs brass mortice lock 100mm long vertical type 2 levers with handle & 2 duplicate keys fixed to shutter with handles complete all as specified and as directed. Make: Godrej/Harrison or equivalent as approved by GE.

S & F anodised aluminium grills for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for complete removal of existing treatment on brick/ stone/ plastered wall surfaces and applying two coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surfaces etc complete all as specified and as directed.

M&L PCC 25mm thick type B-0, 1:2:4 (12.5 mm graded aggregate) as in sub-base to floors as a levelling etc., where ever as required complete all as specified and as directed.

M&L for vitrified ceramic tilies 10mm thick (square/ rectangle) polished light shade, area of each tiles n.exc 0.36 sqm each in floors and jointed in neat cement slurry and pointed in white or coloured cement to match over and including for providing of screed bed or bedding layer of cement mortar 15mm thick for laying floor finish in CM 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tilies 10mm thick (square/ rectangle) polished light shade, area of each tiles exceeding 0.36 sqm each in floors and jointed in neat cement slurry and pointed in white or coloured cement to match over and including for providing rendering 10mm thick on brick/concrete surface in CM 1:4 to receive tiles in skirting/dados complete all as specified and as directed.

S&F Sun control film of 25micron rflective type fixed on glass panes of standard thickness of apporoved colour complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 Volts FRLS multistranded drawn through and including rigid PVC conduit on surface and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with suitable hylem sheet for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for: (a) One light point controlled by one, one way switch 5amps, SP

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One Bell point controled by one bell push switch 5 amps, SP

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No. 137 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade FRLS for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor PVC insulated FRLS cable as earth continuity conductor complete all as specified and as directed.

S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush typewith fuse and neon indicator complete all as specified and as directed.

S & F bell push 5 amps single pole flush type complete all as specified and as directed.

S & F electric bell AC 230 volts single pole complete all as specified and as directed.

S & F electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden/PVC round blocks complete all as specified and as directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

S & F wall mounted box type LED batten suitable for 20w with LED lamp, 6500K, 140-270Volts, along with integrated driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor of multistrand three core 1.5 sqmm of suitable length from fitting to the ceiling rose with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Havells-REGALBATTENT8UPTO1X22 WDSBSWH, TUBE-PHOTONULTRAE201212T8SSTL20WLED865SPC or equivalent in Wipro/Bajaj as approved by GE.

M&L LED security Light luminaire 25 watts with deep drawn housing including with necessary flexible copper conductor of multistrand three core 1.5 sqmm of suitable length and all accessories, with suitable pipe bracket 43 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts complete all as specified and as directed. Make: Havells- ENDURAPEARLSL25WLED 757SASYTOPCMP or equivalent in Wipro/Bajaj as approved by GE.

Supply and replace LED Lamp pin type 9 Watts complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SPN 415 volts suitable for fixing in MCB DB of capacity 40 amps complete all as specified and as directed.

S & F MCB SP 5 to 30 Amps 240 volts for fixing on MCB DB's complete all as specified and directed.

S&F sheet metal enclosure vertical type MCCB, DB, TPN, 8 way with 200 Amps rated bus bar 415 Volts double door including incoming MCCB TP 415 Volts, AC 3 phase 50 Hz , 16 KA with fixed magnetic setting for current rating of capacity 100 amps ( MCCB TP shall confirm to IS 13947 (P2) IEC : 947 ) made out of CRCA sheet housing with powder coating and confirming to IS 13032, 8623, BS 5486 accommodated suitably in a MS enclosure weather proof made out of MS sheet having double door with magnetic locking system complete including 2 coats of powder coated painting all round over a coat of primer complete all as specified and as directed. Make: Cat Part No DHDLVDRWGOFO08 of Havells or equalent in Bajaj/Wipro/ C&S

S & F MCB SP 40 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade FRLS with copper conductor drawn through and including non-metalic rigid PVC surface conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade FRLS with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. Note: 3runs of 6Sqmm Cable and one run PVC conduit shall be measured as one unit length.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc and writing MES No with black paint and testing complete all as specified and as directed. Note :- 1. PVC 3 Core copper cable multstandrad of size 0.50 Sqmm from ceiling rose to ceiling fan deemed to be included in the rate quoted by the contractor 2. Necessary repairs/replacement of unserviceable parts shall be measured and paid seperately.

Supply only the items for ceiling fans/ exhaust fans of any size and sweep: (a) Sealed ball bearing suitable for ceiling fan of any size

(b) Gun metal bush

(c) Rubber bushes with MS clamp,bolt,nut and split pins

(d) Fan condensor 2.5 mfd

(e) Painting of Fan and blades as the original color

(f) Rewinding of burnt ceiling fan motar for 1200 / 1400 mm sweep fans with super enamelled copper wire of suitable size for any make and model including transporation and handling (both material and labour) complete all as specified and as directed .

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 15mm dia bore complete all as specified in Electrical plate as per SSR Part I (Specifications) and testing complete all as specified and as directed.

Supply and fixing for exhaust fan heavy duty of metal body along with metalic shutters, frame, screws, bolts & nuts with four metal blades of 300 mm sweep, 1400 RPM including making of Holes in the walls of any size, any thickness for fixing of the exhaust fan and making good wall surface as the existing wall, painting in wallall complete all as specified and as directed. Make: Bajaj modle. Freshee MK-II, Havells Modle. Turboforce, Crompton & Standard.

Excavation in trenches not exceeding 1.50 m width and not exceeding 1.5 m depth and getting out hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soils complete all as specified and as directed.

Removing of surplus soil to a distance not exc 50 m and depositing where directed at a level not exceeding1.5 m above the starting point complete all as specified and as directed.

Supply, spread and filling approved sand in cable trenches as cushioning of under ground cable and compacting complete all as specified and as directed. Note:Compacted thickness only will be measured.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed 4 core 16 sqmm nominal cross section in service connections complete all as specified and as directed.

Supply & lay 40mm dia GI tubing light grade in protection of cable at road crossing / hard standing / pole protection fixed with clamps as per site requirement etc complete all as specified and as directed.

Supplying and laying unreinforced precast concrete cable cover, class LT, type-I, flat size 250mmx150mmx 40mm and laying complete all as specified and as directed.

Supply and fix Water heater storage type, electric,capacity 25 litres, BEE, 5 Star rated including 2 Nos 15 mm dia flexible PVC connecting pipe 45 cm long suitable for hot water supply with brass check nuts complete all as specified and as directed. Make: Model Monza Digi of Havells or Heatbot-SZS-Digital model of AO Smith or ominis model of Racold

SKY CONSTRUCTIONS

M/S DIVIJA BUILDERS

A SOMA RAJU

SAI RAM CONSTRUCTIONS

K LAKSHMAN SINGH AND CO