Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹81,101Admitted-Finance | ₹81,101 | L1 | Admitted-Finance |
| 2 | L2₹85,840+₹4,739 (5.84%)Admitted-Finance | ₹85,840+₹4,739 (5.84%) | L2 | Admitted-Finance |
| 3 | L3₹86,240+₹5,139 (6.34%)Admitted-Finance | ₹86,240+₹5,139 (6.34%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S KHAN ENGINEERING WORKS L3 | M/S NAASIR ENGINEERING WORKS L2 | Competent Engineering Works L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply, Installation, Testing & Commissioning of Borewell Submersible Pumping Unit as per IS 8034 with following specification are as under:
PUMP:
Rated Discharge = 5000 GPH (UK)
Rated Head = 60 meters
Speed = 2900 rpm
Type of pumping Equipment = Borewell Submersible Pumping Unit
MATERIAL OF CONSTRUCTION:
Impeller = Stainless Steel/CF8M/Bronze
Pump Shaft = Stainless Steel.
Pump Casing = Cast Iron
MOTOR:-Type: 3-phase induction motor
Voltage: 415 ± 15% V
Method of starting = As per OEM
Speed = 2900 rpm (Sync).
Frequency = 50 ± 3 % Hz
Winding:- Copper wound
Rating = suitable for above parameters
Method of starting:- As per OEM
Class of insulation = F/Suitable for above parameters
Make:- Kirloskar /KSB /Mather Platt
Submersible motor should be water filled water lubricated type having capacity for above pumping parameters and working on 3 phases; AC supply 415± 15% V volts, 50Hz. The motor should be sealed properly to avoid mixing of well water with motor filled water.
a) The job includes providing and fitting of interlocking arrangement against any failure of coupling. It must be fabricated out of MS strips of suitable size and length.
b) The job includes providing and fitting of appropriate size MS nipple 2 feet long threaded on one end and welded to same size MS flange of thickness at other end for column pipe as per site requirement. The threaded portion should be as per size of pumping out let for proper fixing.
The job includes providing and fitting of R. I. cloth joints/rubber washers with nuts, bolts and washers for all joints of column pipe. The job also includes lowering of pumping unit in the well then proper testing and commissioning of pumping unit on full load at site.
Note: Providing of test certificate & Characteristic Curve of pumping equipment is compulsory. | 1 | Job | 66,700 ₹66,700 | 66,500 ₹66,500 Lowest | 70,545 ₹70,545 |
| 2.00 | Supply, installation testing and commissioning of ductile iron double flanged, non-rising spindle resilient seated sluice valve (PN16) as per IS 14846 for regulating the water supply. The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber (Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical position. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, and Flanges etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos.
M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with GI Pipe line at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
Size: DN 80
Rating: PN16
Make: Talis/Sigma Flow/VAG
The Test Certificate of Sluice valve duly stamped by manufacturer shall be provided at the time of supply of material | 1 | Job | 19,000 ₹19,000 | 18,800 ₹18,800 | 10,250 ₹10,250 Lowest |
| 3.00 | Providing and fitting of rubber gaskets for flanged joints of rising main with nominal size 80mm. | 6 | Nos | 90 ₹540 | 90 ₹540 | 51 ₹306 Lowest |
Tender Value
₹85,999
EMD Value
₹1,800
Closing Date
15 Aug 2026, 4:00 pmClosed
Ex Engineer Jalshakti Mech. Div Sgr
Office of the Ex Engineer Jalshakti Mech. Div Sgr
Supply, installation, testing and commissioning of Borewell submersible Pumping unit at WSS Bone and Joint Hospital.
2026_PHE_317719_1
JSMDS/e-NIT-21 of 07-2026
Open Tender
Miscellaneous Works
Item Rate
30 days
Bone And Joint Hospital
As Per NIT
2 documents required · 2 mandatory
₹0
₹1,800
24 Aug 2026
24 Jul 2026
17 Aug 2026
24 Jul 2026
15 Aug 2026
24 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Installation, Testing & Commissioning of Borewell Submersible Pumping Unit as per IS 8034 with following specification are as under:
PUMP:
Rated Discharge = 5000 GPH (UK)
Rated Head = 60 meters
Speed = 2900 rpm
Type of pumping Equipment = Borewell Submersible Pumping Unit
MATERIAL OF CONSTRUCTION:
Impeller = Stainless Steel/CF8M/Bronze
Pump Shaft = Stainless Steel.
Pump Casing = Cast Iron
MOTOR:-Type: 3-phase induction motor
Voltage: 415 ± 15% V
Method of starting = As per OEM
Speed = 2900 rpm (Sync).
Frequency = 50 ± 3 % Hz
Winding:- Copper wound
Rating = suitable for above parameters
Method of starting:- As per OEM
Class of insulation = F/Suitable for above parameters
Make:- Kirloskar /KSB /Mather Platt
Submersible motor should be water filled water lubricated type having capacity for above pumping parameters and working on 3 phases; AC supply 415± 15% V volts, 50Hz. The motor should be sealed properly to avoid mixing of well water with motor filled water.
a) The job includes providing and fitting of interlocking arrangement against any failure of coupling. It must be fabricated out of MS strips of suitable size and length.
b) The job includes providing and fitting of appropriate size MS nipple 2 feet long threaded on one end and welded to same size MS flange of thickness at other end for column pipe as per site requirement. The threaded portion should be as per size of pumping out let for proper fixing.
The job includes providing and fitting of R. I. cloth joints/rubber washers with nuts, bolts and washers for all joints of column pipe. The job also includes lowering of pumping unit in the well then proper testing and commissioning of pumping unit on full load at site.
Note: Providing of test certificate & Characteristic Curve of pumping equipment is compulsory. | - | Job | - | - |
| 2 | Supply, installation testing and commissioning of ductile iron double flanged, non-rising spindle resilient seated sluice valve (PN16) as per IS 14846 for regulating the water supply. The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber (Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical position. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, and Flanges etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos.
M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with GI Pipe line at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
Size: DN 80
Rating: PN16
Make: Talis/Sigma Flow/VAG
The Test Certificate of Sluice valve duly stamped by manufacturer shall be provided at the time of supply of material | - | Job | - | - |
| 3 | Providing and fitting of rubber gaskets for flanged joints of rising main with nominal size 80mm. | - | Nos | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
BOQ_1042675.xls
BOQ • 0.38 MB
CORRIGENDUM-Date-Extention-NIT-21.pdf
PDF • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .