ELECTRICAL WORKS IN RTO SRIPERUMBUDUR

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories except ceiling rose and round sheet with flexible hose 0.25 meter, Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points/Coil).

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil)

Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Higher End) complete with TW round blockson wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 2 x 4 feet 18W Twin crystal glass LED tube light with TW round blocks on 0.75 mtr conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with LED tube.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb

Supply and fixing of 20W batten type Mirror Light with complete connection of PVC wire of 1.5 sq.mm on round blocks

Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan

Supply and fixing of Wall Mounting fan 450mm Sweep with air delivery 100cmm and speed of 1400 rpm speed. Blade of al material 525mm x 225 mm x 525 mm of size. Make- Crompton/ Havells.

Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.

Supply and fixing of 3nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.

Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.

supply and fixing of 20 Amps DP Plug and Socket in sheet enclosure with 32A DP MCB inflush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make]

Supply and erection of 2.0 Ton capacity ( 3star Rated) Split type Airconditioner unit confirming to ISI 1301 (part-2) 1992 with amendment No.1 fitted with Hermetically sealed compressor operationon 230V 50Hz AC supply system with refrigerant gas R-22 suitable for high wallmounting evaporator and specification as under general requirement interconnection of pipes and cable.

Supply and erection of 5 KVA capacity Automatic Voltage stabilizer suitable to operation on 230 volts, single phase,50Hz,AC supply system with tie delay relay and High/Low voltage cut off, input voltage range 170V to 270V AC single phase, wall mounting type stabilizer with necessary clamp.

Supply and fixing of MS Stand( Bracket style) for fixing outdoor unit. Of arm length of 270 mm x 230 mm dimension specifically designed for conditioner capacities 1.5/2.0 ton.

Supply and fixing of Copper pipe to connect Indoor and Outdoor units

Supply and fixing of water drain pipe line (1” PVC Pipe)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63A 4P MCB as incoming and 18 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 4 Nos 32A 3P MCB, as outgoing on wall with earth connection only.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCB switch as incoming and 2 Nos 32A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCB switch as incoming and 2 Nos 63A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. (master)

Supply and demonstration of 2 KVA inverter with input Voltage range 180V -260V and output Voltage 200V-230V 50HZ with micro controller based design like microtek/ equivalent with 2 Nos 12V -150AH Exide battery/ equivalent and testing complete.

Supply and fixing of 32A DP MCB in flush with sheet enclosure in wall with earth connection [Legrand (MDS) / Hager (L&T) make]

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1No. neutral link, copper earth flat of size 1" x 1/4" with interconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete

Supply and fixing of 200A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with PWD Earthing.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2of1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and run of 4 of 16 sq.mm. PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 16 Sq.mm Copper wire and making good of the concealed portion with suitable colour

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and clamping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and laying of 2x10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and Installation of unmanaged 10/100/1000 Layer - 24 Port LAN Network Switch with fan

Supply and fixing of 4 MP POE IP Bullet/Dome Camera and 5×5 inches Junction Box (Pack of 4) Square Weather-Resistant For CCTV Camera Mounting Junction Box

Supply and fixing of RJ 45 I/O socket with Cat 6 PVC Modular box suitable Face plate dual socket RJ-45

Supply and Installation of 6 U Rack With Fan on wall of size L550mm x H255mm X D540mm.

Supply and run of 1 of CAT 6 cable in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour.

Supply and fixing of 32 Channel Network video recorder for CCTV with 1 SATA Port loaded with ultra HD 4K Deco and H.265 Compression.

Supply and fixing of 24 port Switche for CCTV IP camera with 1 SATA Port loaded with ultra HD 4K Decoding and H.265 Compression.

Supply and fixing of 8 TB Hard disk for NVR.

Supply and Fixing of LG 80CM(43 Inches) HD Ready Smart LED TV 32SR50F-W

Supply, Testing Commissioning and Handing over of 1 No 100 KVA Diesel Generator set of 0.8 P.F. Three phase 415V/ 420 Volts, 50Hz, 1500 RPM CPCB IV Approved capacity developing 128 BHP water cooled clock wise rotating feed pump with 80KW/ 100KVA operating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and accessories and AMF panel as detailed below including transporting & unloading charges. (A) Engine: Water cooled diesel engine suitable for Generator application with a shaft output of 128 BHP at 1500 RPM under NTP conditions. The Engine shall comprise the following standard fitting flexible coupling fly wheel, ai cleaner, fan blower, radiator, water pump, fuel filter, lubricating oil filter, etc. (B) 12/24 Volt Electronic starting Equipment: Complete with starter motor, dynamo, standard batteries with cable, flexible exhaust piping of 50cms length. (C) ENGINE INSTURMEN PANEL / MOUNTED: Starting push botton / starting key, lubricating oil, temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety control for low lubricating oil, pressure, safety control for high water temperature, safety control for over speed, hour meter (mechnical ) and RPM indicator, battery charging ammeter.

(11)1 set Three pole bimetal release for over load protection of alternator, (12)1 set low voltage HRC fuse for the short circuit protection of the alternator, (13)1 set DC control relays incorporating engine start/ stop and failure to start / lockout, (14)1 set selecor switch auto / manual, (15)1 no Push button "Start", (16)1 no Push button "Stop" 17. 1 no Push button "Reset" 18.1 No signal lamp for indicating load on mains 19. 1 no signal lamp for indicating load on set. 20.1no signal lamp for indicating set fails to start. 21.1no signal lamp for indicating set running. 22.1No signal lamp for indicating battery 23. 1set Pilot lamps of 3 nos 24. MCCB of 200A capacity with magnetic thermal overload release, instant start circuit trip and under voltage release switch. 25.Rectangular copper bus bars (1No for each phase, neutral and earthing terminals) of adequate capacity duly colour coded with head shrinkable PVC sleeves. 26.1No mains voltage monitor 27.Hooter/Audio alarm for indicating set fails to start and for DG O/L. 28.1set Timers 29.Audio and Visual indicator arrangements for: (a) Low lubricating oil pressure, (b) High water temperature, (c) Over speed 30.1No Earth fault relay, (31)Isolator to isolate the neutral. Note:- (1)The control panel should be complete with necessary fuses, cables, label, other accessories with neutral isolation arrangements.

(2)The engine should trip for the following: (a)Low lubricating oil pressure, (b)High water temperature, (c)Over speed , 3.Supply and fitment of Auto Mains Failure Panel, 1 EB Service wih 200 Amps switch and contactors SUF Control relays, timers etc suitable for auto change over of DG & EB Service. F.FUEL TANK : Fuel tank of 200 litres capacity and with inlet and outlet connections, level indicator with scale etc. G.BASE FRAME:Base frame should be fabricated with MS channel frame of rigidly welded construction for mounting of generaor set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame wih proper alignment. H) ACOUSTIC ENCLOSURE: The Acoustic enclosure, Self standing weather proof KG- CPCB IV Typed Acoustic canopy KG 250WS floor mounting type with modular construction with the provision to assemble and dismantle easily and designed to suit all weather condtions. Erection of acoustic enclosure suitable for 100KVA Diesel generator complete with all accessories as above and suitable supports etc. 1. Supply of manuals for operation & maintenance of DG set with warranty card etc.Erection of Get set:- Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion around the foundation erection of 100KVA Generator set over the exisiting foundation and erection of Generator set with proper alignment over the existing foundation to suit 100KVA Generator set Foundation size L5150xW2500xH1200mm.

Supply and installation of exhaust piping of sufficient length with suitable MS pipe so as to extend outside the generator room with necessary thermal insulation

Supply of tools such as1 no 15" cutting piler , 1no 6" screws driver , 2 nos 9" screw driver , 1 set 6 nos double ended spanner ,1No 1/2 ip hammer , 1No spanner for removing engine oil plug 1no line tester required for the maintenence and operation of generator set -1 set

Supply and demonstration of the following safety accessories (a) 1 meter x 1 meter x1/2 inch 11kv rubber mat - 2 nos., (b)one set of 4 nos. 9 liters fire buckets with metal stand frame - 1set, (c)first aid box with medicine - 1no, (d) 11 kV rubber hand gloves - 2 nos., (e)2 Kg capacity dry powder type fire extinguishers - 2 nos, (f) Hand operated pump to transfer fuel from standard barrel to fuel tank - 1 no. (g)First aid chat in Tamil and English - 1no. (h) Battery water acidity tester - 1 no.

Preparation of site plan, physical layout, electrical line schematic diagram in 10 sets. Getting drawing approval from CEIG, preparation of completion report, rectification report and arranging CEIG’s inspection and obtaining safety certificate. Preparation of one set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in the generator room – 1set.

Supply of diesel to run the Generator set for minimum of 8 hours

Supply and clamping of 3-1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and laying of 3-1/2 X 120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and clamping of 3-1/2 x 95 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and laying of 3-1/2 X 95 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection

Supply and erection of 250A capacity dust and vermin proof cubical panel board size of 6'X 4'X1.5' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with 33X 6mm tinned cu. Flat for 3 phase , neutral and 4 Nos 25 x 3mm tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches 33X6mm tinned cu. Flat for interconnection of 250A incoming switch to bus bar, 25x 6mm tinned cu. Flat for interconnection of 2 nos 125A outgoing switch to busbar,25x 3mm tinned cu. Flat for interconnection of 100A outgoing switch to busbar, 25x 3mm tinned cu. Flat for interconnection of 3 nos 63A outgoing switch to busbar and including supply and fixing of KWh meter (Submeter) & indication lamps with HRC fueses connections complete etc. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate 8 Nos 3 phase switches and supply and fixing of the following switches.1.250A TPN switch as incomer -1 No, 2.125A TPN switch as outgoing switch -2 Nos, 3.100AA TPN switch as outgoing switch -1 No., 4.63A TPN switch as outgoing switch -3 Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base.

Supply and erection of 250A capacity dust and vermin proof cubical panel board size of 6'X 4'X1.5' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with 33X 6mm tinned cu. Flat for 3 phase , neutral and 4 Nos 25 x 3mm tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches 1.250A TPN switch as incomer -1 No 2.125A TPN switch as outgoing switch -2 Nos, 3.100AA TPN switch as outgoing switch -1 No, 4.63A TPN switch as outgoing switch -3 Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base.

Please Enable Macros to View BoQ information