Construction of Anganwadi building Theethanviduthi in Theethanviduthi Panchayat

Amount

Construction of Anganwadi building at Theethanviduthi in Theethanviduthi Panchayat

Earth work exacavation and depositing on bank with initial lead and lift in cll clauses of soils such as as per S.S.20B for narrow foundation etc. complete.

Supplying and filling of conveyed earth with a lead of 1Km for basement filling

Cement concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials to site including all labour charges for filling etc complete

Supplying and errecting Centering for sides and soffixs of all RCC works including cost and conveyance of all materials to site and all labour charges etc., complete.

Cost and supply of steel with fabrication charges including cost of steel and binding wire complete with standard specification etc., complete

R.C.C. 1:1 1/2:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges etc., complete.

Brick work with Cement Mortar 1:5 Mix using Country Bricks including cost and conveyance of all materials to site and all labour charges etc., complete.

Ceiling plastering with cement mortor 1:3 mix to 10mm thickness including cost and conveyance of all materials to site and all labour charges etc. complete.

Plastering with cement mortor 1:5 mix to 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

SUPPLY AND FIXING OF GLAZED TILES including cost and conveyance of all materials to site and all labour charges etc. complete

Weathering Course Concrete to 80 mm thickness (average) using 20mm size Brick jelly with slacked lime in the proportion 32:12:50 (No sand to be used) Cft to proper gradient,well beation with wooden beaters etc., complete.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Fabrication and Supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5mm equal M.S angle and Shutter frame made of 25x25x5mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G Plate etc.,

ventilater

Fabrication and Supply of Mild Steel Window of any size with single leaf outer frame made of 35x35x5mm equal M.S angle and Shutter frame made of 25x25x5mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G Plate etc.,

Distembering two coats oil bound distember over priming including cost and conveyance of all materials to site and all labour charges etc.,complete

Emulsion Painting two coats over priming including cost and conveyance of all materials to site and all labour charges etc.,complete

Painting in two coats with Over the new Iron work such as Steel Doors,Windows,Ventilator etc., with best approved Synthetic enamal paint of approved colour over the existing priming

Wiring with 2x1.50 Sq.mm (22/0.30) PVC insulated SC unsheated Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick Hylum sheet cover with TW box cover with TW box and 5A FT switch with continuous earth connection of 14 SWG TC wire for making good of the Concealed portion with suitable colour for PVC concealed Light Point / Fan Point sd 24

Wiring with 2x1.50 Sq.mm (22/0.30) PVC insulated SC unsheated Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150mm x 100mm x 113mm TWswitch with 3mm thick Hylum Sheet cover 5 A 3 Pin non interlocking CS Plug with continuous earth connection of 14 SWG TC wire for making good of the Concealed portion with suitable colour for concealed PVC Plug Point SD 36

Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheated copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains SD 64

Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheated copper conductor of 1100 V grade in 25mm dia GI Pipe (Class 'B') suitably bent at both ends with necessary angle Iron upright and end supports for mains SD 69

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittin sd 88

Supply and fixing of 1200mm (48") AC Ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp.SD 106

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Europeon Water Closet with all fittings and 10lit capacity flusing tank

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unload ing, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

M/S.AMAR CONSTRUCTION (BID ID -1299067)