EEE-III/RZ/TC/2022-23/23.1

Amount

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amp switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 A switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required (a) 20 mm

S/D following size of FRLS PVC insulated copper conductor 1 core cable in existing surface/recessed /PVC/ Steel conduit as reqd. (a) 3x2.5 sq mm

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 63 amps

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required (a) 100 amps

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (a) Upto 450 mm sweep

Laying of one no PVC insulated and PVC sheathed/XPLE Al Conductor armoured power cable of 1.1KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (a) 250 A,25KA,TPMCCB

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Supplying and fixing call bell/angle holder including connection etc as required

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply of 12"(300 mm) sweep 1400 rpm exhaust fan heavy duty complete with shutter, blade etc as reuired.

Rewinding of AC ceiling fan of all sizes and make i/c oiling, greasing as required. New Model (LIGHT WEIGHT)

Replacement of ball bearing of size 117/120 NBC equivalent SKF make as required

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:- 2x25 sqmm

S.I.T.C of LED Tube fitting luminairs 20 watt rating complete with extruded aluminium batten prewired with high efficient LEDs with the following specification. (a) Total system wattage - 20 watt +/- 5% (b) Luminous efficiency lumens/watt >=95 (c) Power factor > = 0.95

Supply, installation ,testing & commissioning of surface /recess mounting CRCA housing 36 watt LED luminaire with Acrylic cover diffuser with following specifications including fixing on existing wall/surface with connections as reqd. ((a) Total system wattage - 36 watt +/- 5% (b) Luminous efficiency >=95lumens/watt (c) Power factor > = 0.95

SITC of 150W LED Flood Light luminiare fitted with lense, made of pressure die cast aluminium housing & toughned glass cover complete with the following specification as reqd. a) Total system wattage =150 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c) Power Factor>=0.95 d) Protection Class- IP-66

S & F of compartmentalized cubical panel board duly powder coated made out of 16 SWG MS sheet with Al. bus bar i/c interconnection copper wiring arrangement for mounting for switchgears, change over switches ,MCCB i/c making the foundation brick work /angle iron frame on floor/wall with proper locking arrangement etc complete as required at site. upto depth 30 cm

Supply and fixing 3mm thick phenolic laminated sheet i/c cutting as required.

Supply of 9/10 Watt LED lamp suitable for B22 holder

Naman Enterprises

bharat electricals & electronics