Work no 37 Nagar Palika Parishad sikandrabad ke ward 21 moh ktakheda me sudhir ke makan se GT road tak c c road and Nali nirman karya

Construction of granular sub base by proiding wel graded material,spreding in uniform layours on prepared surface,mixing by mix in place method and compacting disered density,as per Specification clause 401

M-150 class Brick work in 1:4 Cement & Coarse sand mortor in fdn. & up to plinth including supply of all materials, labour, T & P etc S.I No.305(a)

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,

C.C work in 1:2:4 cement coarse sand and 20 mm stone grit including supply of all materials, labour, T & P etc. SINo 279(a)

12 mm thick plaster in 1:4 Cement and Coarse sand mortar including supply of all materials, labour, T & P etc. SINo 584 (a)

Providing concrete for reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203, R.C.C grade M 20

Supplying, fitting and placing TMT bar reinforcement (Fe 550) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Supply & fixing of MS Sign Board i/c painting,letter writing etc. complete.

GST