Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.6 L+₹90,189.90 (2.68%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹34.8 L+₹1.1 L (3.31%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹35.1 L+₹1.4 L (4.30%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹35.5 L+₹1.8 L (5.38%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
24 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN 913869 C/O 99 APO
SPL REPAIR TO BLDG NO P-137, T-188A AND T-291 AND CERTAIN REVENUE WORKS AT LEIMAKHONG MIL STN
2023_MES_576110_2
8454/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹66,000
Yes
1 May 2023
8 Feb 2023
25 Feb 2023
8 Feb 2023
24 Feb 2023
17 Feb 2023
Amount
Schedule 'A'
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness (below or above gmd level) complete all as specified and directed
M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L 25 mm thick Cement concrete type B-1, 1:2:4(using 20 mm graded aggregate) as in flooring finished rough complete all as specified and directed.
M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed
M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) in roof kerbs or mud stops rounded or chamfered on edges and other similar bands, plinth courses parpets and railing upto 60 cm in height complete all as specified and directed.
M&L for cement concrete type C2 1:3:6 (40mm graded aggregates) in surface channel and drains etc. complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) in window or door sills, lintels, bressumers, steps, quoin blocks (for use with ma- sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchor-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham-fers, weatherings, throat-ing etc. and setting in mortar complete with joints to match but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, molds mitred / stopped ends etc complete all as specified and directed. Note:- (1) Using Dimapur sand.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius build in CM 1:4 complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.
S&F glazed colored ceramic tiles 350x 250x 7mm as in vertical surfaces as dado, set and jointed in neat cement slurry and pointed in white or color cement to match the tiles including 10mm thick backing coat in CM in 1:4 complete all as specified and directed
M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match the surface including 15mm thick screed bed in CM 1:6 complete all as specified
Dismantling of structural steel work of any description complete all as specified and directed.
S&F flat iron for wind ties for roof including securing bolts complete all as specified and directed
S&F Steel tubular work in posts, truss & purline including special shaped washers etc. and butt welded to tubes complete all as specified and directed.
S&F Rolled section as in main and cross beams, hips and Jack rafters, purlins where connected to common rafters and running rails and guides for sliding door, fixed with angle cleats or other connecting plates confirming to Fe-410-W Gde E-250 quality A complete all as specified and directed.
S&F Fe-410 W (Gde-250) roof trusses (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (beams,tee angle,channel or flat sections) including distance pieces,cleats etc, complete all as specified and directed.
M&L hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work as drain and gally trap grating etc conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Erection and fixing only to roof trusses(framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (beams,tee post angle,channel or flat sections etc) including distance pieces,cleats etc complete all as specified and directed. (Note :-serviceable roof trusses (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing obtained from under relavant items items)
Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltr capacity complete all as specified and directed
S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S&F in repair 20 mm ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any color having tensile strength of 550Mpa as ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
S&F 4mm thick ply wood grade BWR (type BB) fixed with screws to the timber frame work as on wall , any description, fixed in any position with nails complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling of wall and ceiling boards of any thickness including cover fillets complete all as specified and directed.
M&L for providing 4mm thick 'E' board in ceiling with galvanized iron snap frame of 'T' Section 24x38x0.70mm wall/cleat angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instruction including two coat of oil bound distemper and one coat of white wash complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
Supply only liquid water proofing compound complete all as specified and directed. .
M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces brick work or concrete surfaces finish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
M & L for rendering 10mm thick in CM 1:4 on fair faces of brick work, finished even and smooth without using extra cement complete all as specified and directed.(using Dimapur Sand)
Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm each complete all as specified and directed
Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the center line over fittings and accessories) complete all as specified and directed.
M&L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
S&F 0.56 mm thick plain, aluminum sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed complete all as specified and directed
S&F 0.63 mm thick plain, galvanised, mild steel sheeting , in ridges , hips, valley gutters, drip and straight flashing (length and girth as fixed ) with grade of zinc coating 275 complete all as specified and directed
M&L fo Granite (of any type) tiles 20mm thick machine cut over cement screed base, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colored PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.
Factory made solid panel PVC shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain color PVC C' channel having a PVC sheet strip 20 mm width struck inside with solvent cement for style and plain color PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top and bottom rail paneling of plain, color PVC sheet to be fitted in the MS frame welded / sealed to the styles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification and drawing in SSR part -II and as per sample kept in office of AGE B/R complete all as specified and directed.
S&F aluminum anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directed.
S&F extruded aluminum alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F butt hinges, 125mm extruded aluminum alloy with galvanized mild steel hinges pin E anodised and fixed type B-21 complete all as specified and directed.
S&F for 200 mm Aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt E type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed check 150mm complete all as specified and directed.
S&F in repair bib tab 15 mm dia fancy type chromium plated crutch handle standared 55 of any color high pressure screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair stop valve cast copper chromium plated fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and directed.
S&F in repair stop valve 20 mm dia cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L for fair cutting straight or raking cutting, n.exc 10cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc including rubbed finish and waste complete all as specified and directed.
S&F in repair pillar tap 15 mm dia cast copper alloy fancy tpye with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
S&F in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing including removing the existing Water Closet complete all as specified and directed.
S&F vitreous china European type / pedestal type water closet "P" and "S" trap including PVC plastic sheet cover (commander) complete all as specified and directed.
S&F in repair vitreous china wash basin white, flat back of size 450x300mm including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia, pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as specified and directed.
S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets, PVC flush pipe complete all as specified and directed.
S&F in repair Gratings to be fixed with white cement complete all as specified and directed.
S&F in repair Glass shelf assembly fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.
S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.
S&F PVC SWR bends of 110 mm bore complete all as specified and directed. .
S&F PVC SWR bends of 75 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed. .
S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia.
S&F PVC (SWR) floor trap plain including greeting jointing with solvent cement 75 mm dia all as specified.
S&F PVC (SWR) reducer of 110 mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
S&F PVC (SWR) P trap 110 mm bore all as specified complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified and directed.
M&L for one coat of acrylic water based exterior grade primer @ 0.9 Itr (undiluted)/10 So sqm diluted with water in 101 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimun 1 ltr per minute having A pressure of 3300 PSI allows 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note: (a) The work pertaining to periodic services & water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer. (b) Cost of scaffolding upto 10mtr height of building is included in this item. (c) The contractor shall upload along with documents under cover-1. 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserved against painting work after date of completion for the 05 years. (Make:- Asian, Burger and Dulex) complete all as specified and directed.
M&L for applying two coats of oil bound distemper using Airless spray technology with S max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on surface complete all as specified and directed. Note (a) Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for cleaning environment certified by paint manufacturer. Proper mixing to be carried out before primer and paint application. (b) The work pertaining to periodic services & water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer. (c) The contractor shall upload along with documents under cover-l. 'Memorandum of Understanding (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserved against painting work after date of completion for the 05 years complete all as specified and directed.
M&L for preparation of old treated surface of wall by washing rubbing down & applying two coat of Oil bound destemper complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, not otherwise described. over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed
Dismantling slabs and tiles of any description or thickness in floors aprons etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
M&L for machine cut kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar over and including 10mm thick cement mortar backing in cm (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L for Supply and fixing anodised aluminum sliding windows three tack (two glazed and one gauged shutter) sectional size of shutter frame 44x24x1.8mm and sectional size of chowkat frame 80x40x1.8mm, glazed with 5.5mm thick one side vision glass and flyproof shutter fitted with stainless steel wire gauged 0.56mm dia and aperture 1.18mm including necessary jointing cleat rubber packing anodised aluminum snap beading, anodised aluminum handle screws etc complete all as specified and as directed
S&F in repairs 4mm thick ordinary quality figured glass, pingead type in squares n.exc 0.5sqm each pane complete all as spd and directed
M & L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Demolition and breaking up drain pipes(salt glazed ware,AC,PVC or reinforced concrete) set in cement mortar including concrete bedding and hauling complete all as specified and directed for 100mm dia pipe complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded broken stone agg) as in bed in drain pipe 110mm dia bore incl packing under and haunching incl necessary shuttering against the sides of pipes after they are laid and tested complete all as specified and directed.
M & L for Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M & L for Excavating over areas, n exc 1.5 mtr deep and getting out in hard/dence soil complete all as specified and directed.
Ditto as per items No 94 but for each additional 1.5 mtr or part thereof in depth beyond the first 1.5 m. complete all as specified and directed.
Returning,filling in including spreading ,leveling ,waterring and well ramming in layers not exc 25cm with soft/loose soil as directed.
Removing excavated material/soil n .exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point.
M&L for Cement concrete, (1:4:8) type D2 (using 40mm graded aggregate)as in foundations complete all as specified and directed.
M&L for Cement concrete, (1:2:4) type B2 (using 40mm graded aggregate)as in foundations complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, in one brick thick in hony comb walling in cement mortar 1:4 complete all as specified and directed.
M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.
M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L 75mm PCC 1: 3: 6 type C-2 using 40mm graded aggregate in sub base complete all as specified and directed.
M&L RCC (Nominal Mix) Type B1, 1:2:4(20mm graded aggregate) using in , plinth beams; bases for columns, etc,; basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M & L for precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in manhole coverslabs with plain fair faces including chamfers, weatherings, throating etc and similar works set in CM (1:4) including with formwork complete all as specified and directed.
M&L RCC for nominal mix (1:2:4) type B-0 (using 12.5mm graded aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs etc. complete all as specified and directed.
Formwork to soffits of suspended slabs as roof slabs, floor slabs, landinqs, lintel / chajja and similar work not exceeding 200 mm thick for fair finished surfaces of concrete complete all as specified and directed.
S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
Ditto as per items No 109 but 5mm and over upto & incl 10mm dia in stirrups, spaces and binders complete all as specified and directed.
M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L for loose filling with brocken bricks of gauge 80 to 150 mm in soakage pits complete all as specified and directed.
M & L for 100 mm thick cement concrete type B-2 , 1:2:4 (40 mm graded aggregate) as in pannel type floor finishes using extra cement for finishing cement concrete surface even and smooth complete all as specified and directed
M&L for Forming contraction (dummy) joints 65 mm x 10 mm wide and filled with sealing compound of grade 'A' complete all as specified and directed
M & L for excavation in post holes (or similar holes) each n exc 0.5 cum in hard /dense soil, getting out, returning, filling in and ramming earth broken rubble mixed with earth around , in layers not exc 25 cm complete all as specified and directed
M & L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate ) as in benching , bed plates, coping as manholes, drain and the like incl formwork and finishing all exposed surface of concrete complete all as specified and directed
Excavation in trenches n exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc for shafts wells, cesspits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed
M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed
Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and 1100 volts grade and unsheathed, multi-stranded, copper conductor single core cable through and including concealed wiring 20 mm PVC rigid conduit all fixing accessories and suitable including 1.6 mm thick cadium plated sunk MS pressed steel terminal modular boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for mounting modular switches , sockets and regulators etc including multi - stranded PVC insulated unshethed stranded copper cable as earth continuity conductor of size 1.5 sqmm and connecting to light fitting /fan etc complete all as specified and directed for following :- (Colour code to be followed) One light/fan point controlled by one, one way switch
All as per item No. 120 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light/fan point controlled by one, one way switch
One socket outlet 5 Amps 5 pin on same board
One socket outlet 5 Amps 5 pin on independent board
All as per item No. 122 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
S&F modular white cover with frame for fixing of 12 module.
S&F modular white cover with frame for fixing of 8 module.
S&F modular white cover with frame for fixing of 6 module.
S&F modular white cover with frame for fixing of 3 module.
S&F modular white cover with frame for fixing of 2 module.
S&F modular metal flush box for fixing of modular switches, socket, fan regulator of 6 module
S&F modular metal flush box for fixing of modular switches, socket, fan regulator of 3 module
S&F blank spacer plate for single module complete all as specified and directed.
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 40 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
Taking down old unserviceable light fitting of any type and in any situation complete all as directed.
S & F LED tube light fitting 20 W LED 6500K basic all purpose surface and wall mounted LED robust and high performance batten LED luminar comprises of extruded channel in thermally conductive materail glare and smooth light complete all as specified and directed .
S & F lamp holder PVC Polycarbonate type with cord grip cap suitable for pendant fittings including lamp complete all as specified and directed
S& F LED light fittings 1 x 22 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed
S&F Service wire connection with one twin core 10 sq mm, 2 core, 1100 volts grade heavy duty flat or circular cable, multi stranded aluminium conductor, PVC insulated served with inner sheathing of PVC tape armoured, suspended by insulating hangers not more than one mtr apart incl 4mm dia GI suspension wire complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)
M/s RS Enterprises & Supplier
M/S N JADUMANI SINGH
L BINOD CONSTRUCTION CO
M/S BIJOYA LAXMI ENTERPRISE
M/s Ritz Marketing
APPLE CONSTRUCTION
Manipur Steel Industries(INDIA)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .