ADDITION ALTERATION IMPROVEMENT TO STATION SPORTS COMPLEX AT AF STATION BAMRAULI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, all as specified and as directed.

Demolition of cement concrete of any position not otherwise specifically provided (below or above GL) complete all as specified and as directed.

M&L 7 to 8 mm thick, joint free, germ free Non Skid ceramic coloured tiles (square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile laid over and inclduing 15mm thick screed bed or bedding layer layer in cement mortar 1:6 complete all as specified and as directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in levelling course complete all as specified and as directed.

M&L joint less Glazed germ free ceramic tiles in vertical surface 350mmx250mmx7mm or 450mmX300mmX7 mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade tile over and inclduing 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F in repair Vitreous china counter top wash hand basin 'white/ivory' miniumum size 560mmx470mm fixed on and including 18-20 mm thick telephone black machine polished granite slab in single piece of minimum size 900 mm x 600mm including necessary cutting and bevelling of exposed edges of slab.including chromium plated brass coupling, bottle trap,15 mm chromium plated pillar cock, PVC braided connection, 15 mm bore angular stop cock and other accessories as required complete all as specified and as directed. Note :- WHB shall be fixed to granite slab with M-seal or Araldite to make leak proof joint.

S&F PVC cabinet box and shutter made out of 18mm thick PVC prelaminated wood grain board shutter on one side and balacing white to be fixed on the PVC frame with auto hinges and steel screw including fancy type stainless steel handles of suitable size complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (one piece type) ivory/white with PVC sheet cover and flushing cistern, flushing pipe including making good the floor with adjacent floor finishing and making connection to flush pipe etc for making functional and removal rubbish/waste materials to a distance not exceeding 50 m complete all as specified and as directed.

S&F in repair Vitreous china squatting pan 'Orissa pattern' size 630mm x 450 mm excluding flushing cistern and flush pipe including necessary connection to trap and to flushing pipe,anti sphonage pipe etc making good the disturbed surfaces to match with existing surface complete all as specified and as directed.

S&F in repair 10 litre capacity PVC low level flushing cistern ' ivory/white' with inlet,ball valve,float and handle including brackets and 32 mm bore PVC flush pipe of required length complete all as specified and as directed.

S&F in repair 15 mm bore bib taps chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 125 mm size brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 600mm long between flanges complete all as specified and as directed.

S&F in repair Soap dish, Vitreous china white approximate size 160 mmx 160mmx90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair Mild steel chromium plated grating 100 mm dia, fixed to Nahani traps complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) pipes, single socketed in any length with adhesive joints laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110 mm dia PVC (SWR) pipes, single socketed in any length with adhesiveg joints laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. .

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed complete to walls, ceiling or laid in floors etc complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. .

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed complete to walls, ceiling or laid in floors etc complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement, fixing flush pipe complete all as specified and as directed.

S & F in repair 15 mm fancy type stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F Mild steel wardrobe hooks 300 to 450 mm length, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and as directed.

S&F 50 micron powder coated anodised aluminium door shutters with frame, aluminium section weighing ( minimum) 1.5 Kg/m including 5.5 mm thick glass in upper panel and 12 mm thick pre-laminated particle board both side decorative lamination as per user requirement with all necessary fittings,4 lever brass locks, two Nos tower Bolts size 150mm , two Nos handles size 150mm including joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc complete all as specified and as directed.

S&F 50 micron powder coated three track anodised aluminium window and ventilator shutters with frame , (sliding or openable shutters) aluminium sections weighing 0.55 Kg/m ( minimum) including 5.5 mm thick sheet glass, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long 1 No, aluminium hinges type B-21 100mm long 2 No, suitable handle size 150mm 1 No complete all as specified and as directed.

S&F factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed . Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted without any extra extra payment on this account.

S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing/ladders made of hollow tubes,channels, plates etc. including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

M & L for swimming pool crystal glass mosaic tiles of size 75mm x 75mm fixed in floor or wall , jointed with tile adhesive and grouted with glass mosaic white mixed with colour pigment to match colour of tiles complete all as specified and as directed.

M&L for 10 mm thick coloured Vitrified anti skid Endura max grip with pavement tiles each tile not exceeding 0.36 Sqm for floor or pavement etc, jointed in neat cement slurry and pointed with white cement mixed with colour pigment to match colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces, surface finished fair and even complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces, surface finished even and fair complete all as specified and as directed.

M&L 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, surface finished fair and even complete all as specified and as directed. .

M & L applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ litre of approved manufacturer of required shade and colour complete as per manufacturer's specification two coat over applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth after removal of existing of wall completed all as specified and as directed.

M&L applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete as per manufacturer’s specification. Two coats over applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth after removal of existing of ceiling completed all as specified and as directed.

M&L applying two coats of synthetic enamel paint of approved shade including preperation of old painted surfaces of steel and iron surfaces of any description over 10cm in width or girth not otherwise described complete all as specified and as directed.

M & L applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Akali & fungal resistance,, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 Litre/10 sqm over new wall including complete removal of existing treatment of wall complete all as specified and as directed.

M&L for removing and cleaning old sealent/bitumen joints of size 20 mm wide and 30 mm depth (expansion or construction or dummy joints) including removing filled materials and cleaning the joint with brush and removing all loose fine particle with compressed air and filling the joints with polyurethane based sealent compound after priming with suitable primer as per manufacturer's instruction complete all as specified and as directed.

Securing glass in metal frame of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed.

S&F Solar control film 50 micron reflective type sticked to glass panels as per manufacturer’s instructions complete all as specified and as directed.

S & F 3.20 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting sealed down with an approved adhesive complete all as specified and as directed.

M & L for dismantling down existing unserviceable loose and unsound cement plaster or concrete of any description and in any position from existing external / internal surfaces of RCC slab / beams / columns / fascia etc. to a average depth of 40mm using chisels or power driven pneumatic chisel with necessary scaffoldings as required at site and disposal of unserviceable materials out side the MoD land including cutting of all edges, making the surface to recieve the following applications:- (i) Abrade out / expel corrosion all loose scales rust etc. from the observed reinforcement by applying rust remover and cleaning the steel reinforcement properly. (ii) Applying anti corrosion chemicals on observed reinforcement surface and preparing the surface complete all as specified and as directed.

M&L for providing and fixing wire netting of stainless steel wire mesh of size 25mmx 25mm and 1.40mm dia fixed with tinned tacks of wire staples to existing old reinforcement where ever necessary in external and internal surface of dome , beams ,bracings colums etc in place of new reinforcement bars by welding for supporting the concrete including necessary scaffolding as required and applying protezion ferro mono primer and anti corrosive primer to steel and concrete surfaces complete all as specified and as directed.

S & F turbo air Ventilator Industrial grade including polycarbonate transcluscent sheet over Hanger Roof fixed In repair completely above hanger roof as per specification complete all as specified and as directed.

Removing and refixing Turbo Ventilator over Hanger Roof including minor repair, oiling and greaseing fixed completely as per specification etc complete all as specified and as directed.

M&L cutting, Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

Excavating in trenches soft/loose soil n.exc 1.5M wide and n.exc 1.5M in depth, for foundation etc or shafts, wells, cesspits, manholes, pier holes etc getting out etc complete all as specified and directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance exceeding 1.50 Km and not exceeding 5.0 Km depositing where directed at a level not exceeding 1.5 m above complete all as specified and as directed

M & L cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concerete complete all as specified and as directed.

M & L 25 mm thick damp proof course in cement concrete in 1:2:4 mixed with water proofing compound as per manufacturer's instruction to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-0 using 12. 5 mm graded stone aggregates as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands including necessary use and waste of form work complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam hunchigs, girders, bressullers, lintels, cantilevers, shelves including supports over hanges and similar works vertical or better, rough finished surfaces of concrete complete all as specified and as directed.

Use and waste of formworks to soffits of suspanded slab such as roof slabs,floor slabs,landing and similar works not exceeding 200 mm thick horizontal or sloping , rough finished surfaces of concrete complete all as specified and as directed.

M&L reinforced cement concretee nominal mix 1:2:4 type B-1 using 20mm graded aggregate in roof slabs supported walls, beam and columns in floors, roofs, landing,shelves etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction on brick work or concrete surfaces, surface finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, surfaces finished even and fair complete all as specified and as directed.

M&L broken stone hardcore of gauge not exceeding 63mm, deposited , spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L 75 mm thick cement concrete1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection , surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges all necessary accessory required for fittings complete all as specified and as directed.

S & F 3mm thick figured glass pin head type glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden or plastic cleats (Minimum weight 300gms) complete all as specified and as directed.

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incluing 20mm dia PVC ball valves high pressure of with epoxy coated aluminium rod and high density plastic ball hoisted and fixed in position all as specified in SSR Part-I 2009 complete all as specified and as directed.

S&F 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F for 100mm dia cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed.

S&F 100mm dia cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

S&F for 100mm dia Cast iron Bends (any radius) with duck’s foot or heel rest complete all as specified and as directed.

S&F 100mm dia Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified and as directed.

S&F 100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

S&F 100mm dia Cast iron cowls complete all as specified and as directed.

M&l water proofing treatment to roof as per per manufacturer's instructions with the following specification:-. (a) 10 mm thick plastering in cement mortar 1:3 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces. (b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm (c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm. (e) Machine pressed cement concrete tiles 250mm x 250 mm x22 mm thick , set jointed with grey cement and no pigment and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cement mortar screed in 1:3, joints grouted flush and pointed in cement mortar 1:3 (f) Testing for water tightness by water ponding at least 72 hours

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including fixture and fitting such as. switch, sockets, ceiling rose, regulators, batten holders etc and making good disturbed surfaces of wall/floor to match with the existing wall/ceiling/floor etc complete all as specified and as directed.

M&L point wiring with single core PVC sheathed multi stranded FRLSH copper conductor of size 1.5 Sqmm drawn through and including concealed non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia with GI saddles GI screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size ,mild steel terminal boxe with brass screws for mounting switchs, sockets,regulators etc including 1.5 Sqmm PVC sheathed stranded FRLSH copper conductor cable as continuous earth wire and connected to main earth dolly complete all as specified and directed for one light/Fan/exhaust fan point/ bell point controlled by one Switch.

Description same as per item No 109 above but for one 3 pin 5 Amps socket out let point on independent board complete all as specified and directed .

Description same as per item No 109above but for one 3 pin 5 Amps socket out let point on the same board with other switch complete all as specified and directed.

Description same as per item No 109 above but for one power point 3/5 pin 15 Amps socket out let independent board using 2.5 Sqmm multi stranded PVC insulated copper conductor cable with 2.5 Sqmm multi stranded PVC insulated FRLSH copper conductor cable as earth wire complete, all as specified and directed.

S&F switch modular flush 1 way 6A,1 module complete all as specified and as directed.

S&F modular sockets 6 Amp 2/3 pin combined ,2 module complete all as specified and as directed.

S&Fmodular switch 1 way ,16 Amp,1 module complete all as specified and as directed.

S&F modular sockets 6/16 Amp 2/3 pin combined,2 module complete all as specified and as directed.

S&F ceiling rose ,3 phase PVC/polycarbonate , isolated body complete all as specified and as directed.

S&F electronic step type fan regulator 240 volt 50 Htz 120 watt modular type complete all as specified and as directed.

S&F sheet metal enclosure single pole and neutral , double door,8 way, IP-43, IK-09, Isolated neutral bar and fixed flush to wall including takingout old DB complete all as specified and directed.

S&F MCB SPN, 32 Amps ,240 volts, 10 KA 50 HZ 'C' series complete including takingout old MCB complete all as specified and as directed.

S&F MCB SP, 6-32 Amps, 240 volts, 10 KA 50 HZ 'C' series complete including takingout old MCB complete all as specified and as directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector of fittings complete including takingout old light fittings complete all as specified and as directed.

S&F LED Light fitting mirror type with high out put diffuser 2 feet ,10watt ,220 v AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including takingout old light fittings complete all as specified and as directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including takingout old light fittings complete all as specified and as directed..

S&F bracket made out of 40mm dia galvanised iron pipe Medium grade having length not less than 1.5 M with with two Nos clamps made out of 50mmx6mm flat iron , two Nos of nuts,bolts and washers etc complete all as specified and as directed.

S&F Fresh air fan, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose to connector of fan and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F white cover plate with frame two module for modular switches and sockets complete all as specified and as directed.

S&F white cover plate with frame three module for modular switches and sockets complete all as specified and as directed.

S&F white cover plate with frame four module for modular switches and sockets complete all as specified and as directed.

S&F white cover plate with frame six module for modular switches and sockets complete all as specified and as directed.

S&F white cover plate with frame twelve module for modular switches and sockets complete all as specified and as directed.

S&F white cover plate with frame sixteen module for modular switches and sockets complete all as specified and as directed.

S&F modular metal flush box 1/2 module ,1.6 mm thick for mounting modular switches and sockets complete all as specified and as directed.

S&F modular metal flush box three module, 1.6 mm thick for mounting modular switches and sockets complete all as specified and as directed.

S&F modular metal flush box four module ,1.6 mm thick for mounting modular switches and sockets complete all as specified and as directed.

S&F modular metal flush box six module, 1.6 mm thick for mounting modular switches and sockets complete all as specified and as directed.

S&F modular metal flush box twelve module , 1.6 mm thick for mounting modular switches and sockets complete all as specified and as directed.

S&F modular metal flush box sixteen module ,1.6 mm thick for mounting modular switches and sockets complete all as specified and as directed.

S&F down rod for ceiling fan made out of galvanized iron pipe of size 15mm dia medium grade having minium length 1m including threading, cutting, slotting, drilling including nuts, bolts, clips, washers and rubber real as required complete all as specified and as directed.

S&F exhaust fan, steel body AC single Phase, 230V of size 450m sweep heavy duty with blades and frame and louvers complete with all accessories for hanging and connecting with 3 run of 1.5 sqmm, multicore, PVC insulated copper cable from ceiling rose to connector of fan complete all as specified and as directed.

S&F exhaust fan, steel body AC single Phase,230V of size 300m sweep with blades and frame and louvers complete with all accessories for hang and connecting with 3 run of 1.5 sqmm multicore PVC insulated copper cable from ceiling rose to connector of fan complete all as specified and as directed.

S&F ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating with remote for energy saving, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible copper cable PVC insulated of suitable length with remote and remote cell complete all as specified and as directed..

S&F wall mounted fan 400mm, 230 volts , 50 Hz 1400 RPM with 90 degree oscillation and having speed control by two pull cord system complete all as specified and as directed.

S&F Pedestal fan 450mm sweep 1400 RPM, 100 watt , air delivery 115CMM double bearing one year warranty complete all as specified and as directed.

Cutting the existing wall or removing existing steel bar to make a hole for fixing of exhaust fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nuts and bolts of suitable size and making good to disturbed surface to match with the existing complete all as specified and as directed.

S&F 25 litre capacity electric water heater storage type (Geyser) vertical type with suitable size of fastner and including provision and connecting up of stainless steel braided pipe suitable size with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated having element 1.5/2 KW BEE star rating complete all as specified and as directed.

S&F Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated multistranded FRLSH cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLSH cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn in and including PVC conduit not less than 25 mm dia with fittings on walls complete including taking out existing unserviceable sub main wiring cable all as specified and as directed. Note:- Two run of 6 sqmm cable, one run of PVC conduit and one run of 6 Sqmm earth wire shall be measured as one unit.

S&F sub main wiring with 2 run of single core PVC insulated and PVC insulated multistranded FRLSH copper conductor cable 1.5 sqmm , 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit not less than 20 mm dia with all fittings on wall and one run of PVC insulated and PVC unsheathed, multistranded FRLSH copper conductor cable 1.5 sqmm as continuous earth wire of green colour complete including taking out existing unserviceable sub main wiring all as specified and as directed. Note:- Two run of 1.5 sqmm cable, one run of PVC conduit and one run of 1.5 Sqmm earth wire shall be measured as one unit.

Material, labour jointing & testing XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core including making connection with suitable size of cable gland, aluminium lugs etc including taking out existing unserviceable cable complete all as specified and as directed.

Material, labour jointing & testing XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 core including making connection with suitable size of cable gland, aluminium lugs etc including taking out existing unserviceable cable complete all as specified and as directed.

M&L for natural river sand as cushioning of cables including spreading and punning down complete all as specified and as directed. Note : Punned thickness shall be measured for payment purpose

Supply and Laying old size bricks of designation 75 for cable protection complete all as specified and as directed.

S&F 40 mm bore galvanised iron tubing 'light grade' laid in trenches/fixed to wall/ceiling including required fitting complete all as specified and directed

S&F in repair factory made epoxy powder coated Load line Distribution Board VTPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 100 Amp as incomer and 6 to 63 Amp SP MCBs outgoing conforming to IS : 8623 complete all as specified and as directed.

S&F in repair MCCB 125 Amps, four pole, 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and as directed.

S&F LED Street Light 60/70 watt in new generation Energy Saving & Environment friendly light fitting which uses 36 No. high power LEDs as light source. Total LED lumens 9000 lm. Working lifetime of over 50000 burning Hours and it uses Active Power Factor Correction (APFC) electronic gear (electronic driver). Luminaire housing is of pressure die-cast alluminum alloy LM6 for housing (Heat Sink) for better heat transmission. It has IP65 protection. Operating Voltage range is from 100Volt to 265 Volt AC and Frequency range of 50 - 60 Hz. Fitting is suitable for an ambient temperature from -40 deg C to + 50 deg C and Humidity level of 10% to 90% RH complete all as specified and as directed.

S&F hot press moulded SMC boxes with 200 Amps rating bus bar and distribution board and single core PVC FRLSH single core copper conductor 2.5 Sqmm in GI pipe 20mm dia for connection from junction box to street light complete including mild steel clamps fabricated from 25mm x 3 mm flat iron, nuts, bolts, etc for mounting complete all as specified and as directed.

S&F two run of single core FR-LSH PVC flexible wire 1.5 Sqmm , 240 Volts and one run of 1.5 Sqmm FR-LSH PVC flexible wire for street lights complete all as specified and as directed. Note:- Two run of flexible wire and one run of earth wire shall be measured as one unit.

S&F LED flood light fitting high way 150 watt with surge protection 4KV inbuilt in driver and minium 10 KV seperate, IP 66 having pressure die cast aluminium housing with heat resistent toughened glass individual LED lenses complete making connection with suitable in size 3 core of wire and suitable for sustain 440 volt for 2-4 hour, LM-79 and LM-80 test report with 50000 burning hrs LED life from NABL lab shall be provided, CRI (Colour rendering index of fixtures shall be greater then 70, System lumen efficiancy shall be 150 lumen/watt complete all as specified and directed.

S&F bus bar box made out of 3mm CRCA sheet powder coated factory made out door type conforming to IP-65 canopy mounted protection with front and back hinges door with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof and painted comprising one incommer MCCB 100 Amp ,35KA four pole, MCB SPN 63 Amp 10 KA-02 Nos, timer -01, 04 Nos copper bus bar strip duly fixed horizontally step manner , indication lamp -03 Nos, Amp meter & Volt Meter duly fixed on angle iron frame of size 50x50x6 mm and grouted in PCC 1:2:4 type B-I (using 20 mm graded stone agregate) in foundation including earth work completed all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, filling adequate quantity of charcoal and common salt , connected to galvanised earth lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber & 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , water funnel etc complete all as specified and testing on completion.

M&L 4 mm dia galvanised iron earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and as directed.

DKS ENGINEERING WORKS

Perfect Enterprises

Agrawal Enterprises