Karnataka

Active

Works

Buildings

Repairs to Division office Building in Almatti Camp.(CADA BUILDING),Taluka Basavan Bagewadi District Vijyapura

Krishna Command Area Development Authority

KCADA EE FIC Division No 3 Almatti | Karnataka

Amount: ₹8.4 LCloses: 15 Sept 20265d left

Timeline

Published1 Sept 2026
Closes15 Sept 2026

Tender Value

₹8.4 L

EMD Value

₹21,000

Closing Date

15 Sept 2026, 5:00 pm5d left

Tender Inviting Authority

Office Inviting Bids

Krishna Command Area Development Authority

Contact Person

I S SOPPIMATH

Office Number

Mobile Number

Work Description

Repairs to Division office Building in Almatti Camp.(CADA BUILDING),Taluka Basavan Bagewadi District Vijyapura

Tender Information

Tender ID

KCADA/2026-27/BD/WORK_INDENT207

Reference Number

KCADA/2026-27/BD/WORK_INDENT207

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

KCADA EE FIC Division No 3 Almatti

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredA Certified copy of contractor registration issued by the KPWD Class IV and Above

RequiredCopy of the Income Tax Returns filed for the financial year 2025-26. Assessment year 2026-27

RequiredA copy of PAN CARD.

RequiredGST registration certificate

RequiredEPF registration certificate. The intending contractor should compulsorily register with EPF authorities.

RequiredThe intending bidder in its name should have in the last 5 years i.e from 2021-22 to 2025-26, achieved in at least two financial years for other works & at least one financial year For SC or ST or CAT-I or CAT-II A reserved works a minimum financial turnover of not less than the amount put to tender. The Annual Turnover certificate with UDIN from chartered accountant for any two years to be uploaded.

RequiredThe contractor should upload a statement of existing commitments and ongoing works to be completed on their official letterhead.

RequiredEligible Tenderers will be qualified only if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under For others, Assessed available tender capacity equal to A X N X 2.5 - B, For SC,ST, CAT-I & CAT-II A Assessed available tender capacity equal to A X N X 5.00 - B. For more information refer tender notification

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The intending bidders are advised to visit the site of work before submitting their tenders.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The contractor / authorized signatory should attach his / her scanned signature to the Schedule-B before uploading the document.

If any of the dates mentioned above happened to be a general holiday, the next working day holds good for the process.

Further information can be had from the undersigned during office hours.

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published only in the web site for all modifications/ corrections if any.

The intending bidders should note that, if any of the lands either in part / parts or in whole required for the works is not acquired by the CADA. Hence it is the responsibility of the bidder to take possession of such land and start the work on his own risk and cost.

Contractor should abide by the directions of Government towards recovery of 1% (or as modification by Government from time to time) chess from the contractor bill under the provision of building and construction works (welfare chess vide act-1996).

The validity period of EMD shall be for a minimum period of 180 days from the date of opening of tenders.

Successful bidders should execute the agreement within 20 days from the date of acceptance of the tender. If the contractor fails to enter into the agreement within the said period, the EMD of the contractor shall be forfeited and action shall be initiated for banning to participate in the further tendering of Krishna-CADA, Bheemarayanagudi.

The contractor / authorized signatory should attach his / her scanned signature on Letter pad.

If the contractor feels any difficulty while submitting the e-tender he may contact this office during Working hours.

The amounts are excluding GST but inclusive of all other charges.

The increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The Tenderer has to quote his rate by excluding GST. However contract will be concluded for the AMOUNT (Exclusive of GST) but Applicable GST will be paid extra prevailing at the time of execution. If the GST rates are revised during the contract period, the Tenderer/Employer has to accept the revised GST rates for making payment/recovery.

The contractors are bound to abide by the statutory and mandatory Rules and Regulations, mentioned in latest circulars of Mines and Geology Department, for minerals required execute the

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State) otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states)

As per the Karnataka building and other construction workers welfare cess act 1996 1 % of the bill amount will be deducted from the bill.

The Defects liability period is 1 years. The contractor is liable to rectify the defects in the work done up to a period of 1 Year from the date of completion of the work at his cost

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use and certificate shall be submitted

The intending contractors should note that, as the tender invited is on percentage basis, if the bid amount based on the percentage quoted by the contractor is less than the amount put to tender, the contractor shall submit the additional performance security amount equal to the difference between the amount put to tender and quoted amount through Nationalized Bank Demand Draft (DD)/FDR in favour of The Executive Engineer, KBJNL,FIC,DIVISION.NO-3 ALMATTI ,TQ-NIDAGUNDI. DIST- VIJAYAPURAA, at the time of agreement.

Contractors participating in this tendering process/who intent to submit their bids/bid should produce to this office all the Documents in Original at time of opening of Technical Bid(scanned copy of which they should upload) in e-portal

During the time of technical evaluation, if the employer finds that any certificates / information furnished is false and fake, such bids will be disqualified and EMD shall be forfeited, barred from the Participation of tendering process.

If any bidder fails to satisfy the conditions, such bids shall be liable for rejection.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹21,000

Important Dates

Last Activity

4 Sept 2026

Published

1 Sept 2026

Download Ends

11 Sept 2026

BOQ Preview

•

Repairs to Division office Building in Almatti Camp.(CADA BUILDING),Taluka Basavan Bagewadi District Vijyapura

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m,as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution ligh...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

•

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including PVC (S.W.R) drain pipe 100 mm diameter and 1.20 m long complete as per standard design.(As per PWD Vol- II Building SR 2023-24 It...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...

•

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Class- a Economy (As per PWD Vol- II Building SR 2023-24 Item No-14...

•

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 14.18.1 10 litre capacity - colo...

•

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931(As per PWD Vol- II Building SR 2023-24 Item No-13.12 and Page No- 119 )

•

Providing and fixing of Alluminium Handles 150mm for doors

•

Providing and fixing of Tower bolts 300mm long for doors,windows and vetilators (Rate required For 6'/150mm) ( R A Item No.47)

•

Supplying of Door Locks

•

Providing and fixing of Screws for doors,windows and vetilators.

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(As per PWD Vol- II Building SR 2023-24 Item No-13.5.3 and Page No- 117 ) 25 mm nomina...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : (As per PWD Vol- II Building SR 2023-24 Item No-13.4.1 and Page No- 117 ) 25 mm nominal bore.

•

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and con...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Providing, fabricating and fixing of 6 mm thick High Pressure Laminate sheets in standard size of 1200 mm x 2400 mm (Sheets can be supplied in customized length depending on requirement). Sheets shall...

•

Providing and fixing STRAIGHT WORKSTATION TABLE( Frame) consisting of back to back unit made out of 75mm thick MS CRCA powder coated, tile based system for main and return spine ,Top tile finish 8mm t...

•

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized ...

•

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

•

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete(...

•

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 m openable length ( total length 90 m), having 50 nos rounds per 6 m length, upto 3 m height of wall with e...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge (...

•

Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

•

Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insula...

•

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box. Complete all leads and lifts and as per the direction of Engineer in charge

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

•

Supplying and fixing 3 Way surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including nece...

•

Supplying and fixing 3 Module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch. Complete all leads and lifts and as per ...

•

Supplying and fixing of modular 6Amps 3way socket. Complete all leads and lifts and as per the direction of Engineer in charge

•

Supplying and fixing of modular 16Amps one way switch. Complete all leads and lifts and as per the direction of Engineer in charge

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards 6-32Amps TPN

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

•

Supply of round/square recess/surface mounted rolling type LED Down light with 5-6W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to...

•

Supply of 15-18W round/square recess/surface mounted rolling type LED Down light LED square or round down light. Complete all leads and lifts and as per the direction of Engineer in char...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin ...

•

Supplying and drawing UTP-CAT 6E LAN cable.. Complete all leads and lifts and as per the direction of Engineer in charge

•

Digging of Pit for providing GI Pipe type Earthing ordinary Soil. Complete all leads and lifts and as per the direction of Engineer in charge

•

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg. Complete all leads and lifts and as per the directi...

•

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. Complete all leads and lifts and as per the direction of Engineer in charge

•

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. Complete all leads and lifts and as per the direction of Engineer in charge

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

new tender notification Indent No 184 to 207.pdf

Instructions to Tenderers • 7.97 MB

KW-1 bid document Indent -207.doc

Tender Document • 1.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .