WBPWD/EE/KED/NIeT- 05/2026-27/1

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster(to wall,floor,ceiling etc)with sand and cement mortar including rounding off or chamfer ing corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (i)With 1:6 cement mortar (b) 20 mm thick plaster

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damages complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m Toilets Door

Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (a) Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. Roof of Building

(b) Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr Up rooting 3 to 4 times in a year

Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only).

Woodwork in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete,Iron Butt Hinges and M.Sclamps.(The quantum should be correted upto three decimals).Sal:Malayasian

Taking out door and window shutters and rehanging the same with old fittings. (a) With new iron screws.

Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.

Supplying, fitting & fixing1st quality Ceramic tiles in walls and floors to match with the existing work & 4nos. of key stones (10mm) fixed with aralditeat the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2mm thick cement slurry at back side of tiles using cement @2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative