REPAIR, MAINT TO METER PANEL, EARTHING, DBS AND OTHER CONNECTED ITEMS UNDER AGE E/M-1 AT GE(CENTRAL) KHADKI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down sub main wiring ( copper/aluminium ) with casing caping/PVC conduit etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc

Taking down fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting bldg light and MCBs etc and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc

Taking down DBs such as SPN, ETPN and VTPN, wooden meter panel including all accessories, flood light, bollard light, earthing etc and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium plated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc and making good to disturbed surfaces all as specified and directed.

All as per item No 5 above but 5 amps socket point independent all as specified and directed.

All as per item No 5 above but 5 amps socket point on same board as specified and directed.

All as per item No 05 above but two way light point controlled by two way switch all as specified and directed.

All as per item No 05 above but cable of size 2.5 sqmm for one 16 amps socket (Power) point independent all as specified and directed.

M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

All as per item No 10 above but cable of size 2.5 sqmm all as specified and directed.

All as per item No 10 above but cable of size 4.0 sqmm all as specified and directed.

All as per item No 10 above but cable of size 6.0 sqmm all as specified and directed.

All as per item No 10 here-in-before but cable of size 10.0 sqmm all as specified and directed.

S&F 5 Amp switch piano type single pole one way one all as specified and as directed.

S&F 5 Amp switch piano type single pole two way all as specified and as directed.

S&F bell push piano type one way 240 volt ,50 HZ all as specified and as directed.

S&F socket flush type 6 amps, 5 pin, 230v,50 HZ all as specified and as directed.

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v one all as specified and as directed.

S&F call bell electric, ding dong, AC 240 volt, 50 HZ all as specified and as directed.

S&F lamp Holder insulated body with back plate for batten fitting all as specified and as directed.

S&F PVC lamp holder converter from B22 to E27 complete all as specified and directed by Engr-in-Charge

S&F ceiling rose surface Bakelite three terminal all as specified and as directed.

S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 HZ all as specified and as directed.

Labour for taking down old DBs (4 way/ 6 way/12 way) and repairing, cleaning and refixing of same and making good the disturbed surfaces neat and clean of any size all as specified and directed.

S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed.

S&F MCB, Double Pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed.

S&F MCB, Four Pole, 40 to 63 amps, 415 Volts all as specified and directed.

S&F MCB distribution board,Double door, metal enclosure, SPN, 230 Volts, 4 way all as specified and directed.

S&F MCB distribution board, Double door, metal enclosure, SPN, 230 Volts, 8 way all as specified and directed.

S&F MCB distribution board, Double door, metal enclosure, SPN, 230 Volts,12 way all as specified and directed.

S&F MCB distribution board, Double door, metal enclosure, TPN, 415 Volts, 4 way all as specified and directed.

S&F Vertical MCB distribution board, as MCB incomer, Double door, metal enclosure, TPN, 415 Volts, 4 way all as specified and directed. MAKE- Cat Part No- 5077-25 of Legrand or equivalent of Schneider/ABB

S&F Vertical MCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way all as specified and directed. MAKE- Cat Part No-5077-45 of Legrand or equivalent of Schneider/ABB

S&F Metal plug and socket board with MCB SP 20 amp, 10 KA all as specified and directed. MAKE- Cat Part No- 5078 11 of Legrand or equivalent of Schneider/ABB

S&F LED building security light 25 watt, 230V with lens and toughned glass top complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed. Make-CG Cat Part No LSTS--25-CDL-M or equivalent in Wipro/Havells

S&F LED fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos as specified and directed. Make-CG, Cat Part No CCS-100-20-65-HL2-DP-NWH or equivalemt in Wipro /Havells/Philips

S&F LED Bollard light with robust design and efficient light distribution of 10 watt ,230 Volt AC with all fittings complete on PCC foundation all as specified and directed. Make : CG Cat No LBLSN-10-WW or equivalent, Philips, Wipro. Note : PCC will be measured separately.

Supply and fixing MCCB, 4 pole,36 KA braking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 63 to 100 amps, Make- Legrand cat Part No 4200-55 or equivelent model of Schneider/ABB/Merlin Gerin.

S&F in replacement of LED post top lantern 35 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and directed.

S&F bright light 8 inch Milky Doom, round shape outdoor type complete all as specified and directed by Engr-in-Charge.

S&F warm white LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min).

S&F warm white LED lamp 09/10 watt, 230V, PF-0.95 (min) suitable for Pyramid tripod type bollard light all as specifed and directed by Engr-in-Charge. Make Bajaj or equivalent to CG/Wipro/Philips

S&F LED spot light 15 watt, CDL, 230V, PF-0.95 (min). Make- CG Cat Part No CDR-212-15--40-SL-NWH or equivalent to wipro/ Bajaj/Havells

S&F of LED 100W flood light , aesthetically designed roadway luminiare with excellent thermal management, pressure die-cast aluminium alloy for housing (heat sink) with epoxy powder coated with high efficiency long life LED chip inbuilt with electronic driver with APFC. Make Crompton Cat part No CFS-504-100-57-60D-SL-GL-NSG or equivalent in Philips, Wipro

S & F bollard type Translucent poles made of glass fiber reinforced with polymer matric (GFRP) combination of fiber glass and resin, having thickness 06 mm, height 0.75 mtr customized logo incorporation with filament winding by using CNC (computer Numerical Control) method wtih standard seven colour, including flange, dome cover for bolt , coutout and having lighting arrangement with 20 to 30 watt LED strip inside pole with drive all as specified and directed by Engr-in-Charge. Make Helipole or equivalent in Wipro/CG/Philips

S & F bollard type translucent poles made of glass fiber reinforced with polymer matric (GFRP) combination of fiberglass and resin, having thickness 06 mm, height 3 mtr bottom dia customized logo incorporation with filament winding by using CNC (computer Numerical Control) method wtih standard seven colourand including flange, dome cover for bolt , coutout and having lighting arrangement with 60 to 90 watt LED strip inside pole wtih drive all as specified and directed by Engr-in-Charge, Make Helipole or equivalent in Wipro/CG/Philips

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe, cable and getting out in soft loose soil.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

S&F PVC insulated PVC sheathed copper flexible wire multistrand 1.5 sqmm 3 core, ISI marked. Make - Polycab

M & L for rigid non-mettalic PVC conduit pipe of siz 20 mm inclusive of all fittings i.e. tees,bends,elbows, bell mount tube ends and fixing accessories such as couplers, lock nuts,saddles, pipe hooks etc complete all as specified and directed by Engr-in Charge

S&F LED lamp 7 watt, CDL, B-22 Cap, 230V, PF-0.95 (min) incl dismentling taking out unsv CFL.

S&F inverter LED lamp10 WB-22 cap with opal diffuser, IP 20 and inbuilt battery back-up incl dismentling taking out unsv bracket

S&F PVC flexible conduit pipe 10/15 mm dia suitable for PVC cable from ceiling rose to fan/light fitting/ex-fan or etc including taking down unserviceable complete all as specified and directed by Engr-in-Charge.

S&F PVC flexible conduit pipe 05/7.5 mm dia suitable for PVC coper cable from ceiling rose to fan/light fitting/ex-fan or etc including taking down unserviceable complete all as specified and directed by Engr-in-Charge.

M&L for testing of earth resistance value of building earth for electrical purpose, using analog/digital earth resistance tester by suitably inserting spikes as per norms and recording earth resistance value of building in presence of MES Rep and User rep and submission of recorded value in form of hard copy duly signed all as specified and directed.

M & L Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion. Note : all items i.e Concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI lead 04mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal.

S& F meter panel panel floor/mounted on wall, cubical type, compartmentalized dust and vermin proof, indoor installation IP 55 type electrical control panel, including MCCB 63 Amp 4P -01 (Incoming), MCB 32 Amp, DP - 05 (outgoing) including TPN copper bus with suitable capacity made out of powder coated CRCA sheet of size 700x700x200 mm (thickness 2 mm) having an arrangement of fixing the energy meter single phase five number inside the panel and having glasss door to take meter reading without open the panel with an arrangement of incoming supply to meter from TPN DB/panel and outgoing supply from meter to distribution board (DB) with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 6.00 sqmm (nominal area) for phase and neutral crimping with suitable size of lugs/thimble with locking arragement & one lock and making good to disturbed surfaces complete including earth terminal- 02 Nos all as specified and as directed by Engineer in charge Note : The rates of taking down energy meter from old panel and refixing of energy meter in new panel are inclusive.

All as per item No 60 above but with MCCB 100 Amp 4P -01 (outgoing), MCB 32 Amp, DP - 07 (outgoing) and to accommodate 07 energy meter etc complete

PROLINK COMPUTERS

ASHWAMEDH ENGINEERS

MANGAL ELECTRICAL STORES

JP ENTERPRISES

M/S kirpan Enterprises

M/S. Niksun Electro-Infra Private Limited

ONKAR ELECTRIC AND GENERAL STORE

SHREE SHIV ELECTRICAL