S/R to KATS Ayurvedic College Ankuspur Such as Repair and Renovation of Old College and Hospital Building Berhampur Buildings.

16mm thick cement plaster in cm (1:6) finished smooth to brick masonry including racking out joints including watering, curing, cost, conveyance, taxes, royalties, labour with T&P etc. complete in all respect

Wall painting two coats with weather coat of approved shade & approved make to give an even shade etc including cost of all materials, taxes & labour with T&P etc. complete in all floors as per the direction of EIC.

Suplying fitting, fixing up window ( Sliding type ) made up aluminium section 9778 as windows frame section No. 4096, 9777 and 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge.

Finishing wall surface with Acrylic wall puttyof approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour with T&P etc. complete in all floors.

Painting two coats with any approved plastic emulsion paint over a coat of primer to interior wall surface including cost of all materials and labour with T&P etc complete in all respect.

Providing, fitting, fixing up partition walling OEL aluminium anodized section No. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up ACP Board and Glass and jointing angle No. 1855 including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge.

Providing and Fixing of Structural Glazing approved make to be febricated from roll formed sections made of prepainted steel(base steel as per IS-513 of 0.6mm thick 'D'quality galvanized as per IS-277 with zinc of120gm per sqm) with primer of 5 - 75.7microns thick and finished paint with po-lyster paint ( Black / Pearl white / Chocolatebrown) of12-16microns along with the alkydbacker at the back of 5-7 microns and thesizes of outer frame being 46 x 52mm andwith all vertical & horizontal mullions are of46 x 70mm and fixed beading are of 18 x 25mm. Sections for internal top and bottomframes in the louvered area should be 18 x40mm. Top hung shutter should be 46x46mm. Accesories/ ed beadings are of 18x25mm. Accessories/ gaskets are to be used as per the manufacturer's supply and specification like handle being made of high grade aluminium powder coated and with nylon recever and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be glass filled nylon. The sections are to be cut to length jointed and assembled by means of corner bracket and frames are fixed to the concrete / masonry walls by means of self expanding screws and glass to be used with safety laminated glass of 12.38 mm thick with 0.76 mm inter layer Poly Vinyl Butyral (PVB) lamination between two glass with outer being 6 mm thick toughened reflective of Reflactsol series of Saint Globain & inner glass being of 6mm thick toughened clear of Saint Gobain makewith all taxes.

Suplying fitting, fixing up window ( Sliding type ) made up aluminium section 9778 as windows frame section No. 4096, 9777 and 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge.

Suplying fitting, fixing up UPVC window ( Sliding type ) as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge.

Providing, fitting, fixing of Aluminium. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member & 6mm plain glass in top portion with 12mm thick pre laminated board in bottom portion fixed on door frame by means of apered clip No. 4660 & the frame to be completed by means of jointing angle No. 1855 including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge.