REPAIR / MAINT, RECANNING AND PAINTING OF VARIOUS WOODEN FURNITURE ITEMS OF BSO SUB DIVN AT MIL STN NOWGONG UNDER GE JHANSI

Amount

Recanning of all type chairs :-

(i) M&L for recanning of chairs and other furniture with white, half round plastic cane, 2 mm wide and 0.3 mm thick, weaving shall be done as per Godrej Pattern (Plastic cane shall be of Make: as approved by GE/Engineer-in-charge) complete all as specified in drawing and directed. Note - Chair dining 0.39x0.39=0.1521, Chair writing-0.43x0.47=0.2021,Chair easy seat-0.51x0.44=0.2244 & back-0.41x0.32=0.1321 (Drg No FD-279, 280, 229, 70, 244, 204, 357, 258, 47, 75, 30, )

(ii)Minor repairing of various type of wooden chair including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Engineer-in-charge. ( Drg No FD-279, 280, 229, 70, 244, 204, 357, 258, 47, 75, 30 )

(iii) M&L for polishing of chair dining with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed. (Drg No FD-279)

(iv) M&L for polishing of chair writing with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed. (Drg No FD-280)

REPLACEMENT OF SOFA CUSHION

(i) Removing of old cushion of size 21 x 22 inchs & 4 inchs thick foam and replacing foam cushion of sofa new PU foam cushion of 32 density (make: Sleepwell/ Kurlon and cushion shall be covered with velwet decodeor cloth tapestry cloth of range not less than Rs.600 per meter, colour, shade and quality of tapestry shall be as approved by GE complete all as specified in drawings & directed .(Drg No FD/E6 /MAP/07, FD/E6/MAP/02, 273, 258)

(ii) Preparation of surfaces of sofa set 5 seater by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish complete all as specified in drawing & directed.

(iii) Preparation of surfaces of sofa set 4 seater by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat french/sprit polish on exposed surface to achieve high class finish complete all as specifed in drawings & directed.

(iv) Minor repairing of various sofa set 4/5 seater including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Enigneer-in-charge.

TV Trolley (Drg No FD/E6/MAP/04)

(i) Taking down existing unserviceable top form TV trolley and S & F new top shall be of 18 mm thick pre laminated particle board edge moulded all around fixed to frame all as shown in drawing and as directed.

(ii) Taking down existing unsericeable side frame TV trolley and S & F new side shall be of 18 mm thick pre laminated particle board all as shown in drawing and as directed.

(iii) Removing old unserviceable castors from TV trolley and S & F new swivel type castor as per shape and size complete all as specified and directed.

(iv) Taking down existing unserviceable/broken shutter glass from TV trolley and S & F new Shutter glass with 5 mm thick duly revitted to clamp with steel revits with magnetic catcher fixed to frame complete all as shown on drawing and as directed.

TEAPOY verandah (Drg No FD-255)

(i) Taking down existing unserviceable top from Teapoy verandah and S & F new top of teapoy of 18 mm thick pre-laminated particle board exterior grade both side decorative fitted with PVC edging all-round, fixed to frame all as shown in drawing and as directed.

(ii) S & F cap all as per shape and size shown on drawing & as directed.

(iii) Painting to teapoy verandah with one coat of white synthetic enamel paint of 1st quality including preparation of old surface complete all as specified and directed.

TEAPOY verandah (MAP) : (Drg No FD/E6/MAP/17)

(i) Taking down existing unserviceable top form Teapoy verandah and S & F new top of teapoy of 18 mm thick pre-laminated particle board exterior grade both side decorative fitted with PVC edging all-round, fixed to frame all as shown in drawing and as directed.

(ii) S & F cap all as per shape and size shown on drawing & as directed.

(iii) Painting to teapoy verandah with one coat of white synthetic enamel paint of 1st quality including preparation of old surface complete all as specified and directed.

Table Bed Side MAP (Drg No FD/E6/MAP/15 (R) )

(i) Removing the old broken/unserviceable top and S & F new top made from pre-laminated particle board exterior grade as per sample, shape and size shown in drawing complete all as specified and directed.

(ii) Removing the old broken/unserviceable side from and S & F new side made from pre-laminated particle board exterior grade as per sample, shape and size shown in drawing complete all as specified and directed.

(iii) Removing the old broken/unserviceable back ply and S & F new back ply made from 12 mm thick commercial plywood, BWR grade as per sample, shape and size shown in drawing complete all as specified and directed.

(iv) Removing the old broken/unserviceable shutter and S & F new shutter with magnetic catcher made from pre-laminated particle board exterior grade all as per sample, shape and size shown in drawing complete all as specified and directed.

(v) Removing the old broken/unserviceable drawers and S & F new drawers with telescopic channel made from pre-laminated particle board exterior grade all as per sample, shape and size shown in drawing complete all as specified and directed.

(vi) S & F PVC shoe all as per shape and size shown on drawing & as directed.

(vii) Removing the old broken/unserviceable handle and S & F new handle all as per Sample, shape and size shown in drawing complete all as specified and directed.

(viii) Painting to table bed side with one coat of black synthetic enamel paint of 1st quality including preparation of old surface complete all as specified and directed.

Bed Hard ply top : (Drg No FD-245 & 246)

(i) Taking down the existing unserviceable ply wood from the existing head rest of Bed Hard and S & F new plywood 3.5 mm thick teak faced including teak wood beading 4 mm thick as per shape and size shown in drawing and fixed with nails complete all as specified in drawings & directed .

(ii) Taking down the existing unserviceable ply wood from the existing foot rest of Bed Hard and S & F new plywood 3.5 mm thick teak faced including teak wood beading 4 mm thick as per shape and size shown in drawing and fixed with nails complete all as specified in drawings & directed .

(iii) Taking down the existing broken unserviceable side long rail from Bed Hard and S & F new side long rail of teak wood (Ist class), well seasoned complete all as specified in drawings & directed .

(iv) Taking down existing unserviceable ply top from the Bed Hard and S&F new ply top 12 mm thick, BWR grade complete all as specified in drawings & directed .

(v) Taking down the existing unserviceable broken legs of Bed Hard and S&F new legs of Ist class teak wood including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing including french polishing complete all as specified in drawings & directed .

(vi) S&F wooden bracket of bed at corners fixing with suitable screws complete all as specified in drawings & directed .

(vii) Preparation of new or old surfaces of Bed hard by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

SIDE BOARD: (Drg No FD-372,371,241)

(i) Takig down the old broken/ unserviceable top from side board and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade type -II complete all as specified and directed.

(ii) Removing old broken / unserviceable side of side board and S&F new side of Ist class hard wood (teak wood) as per shape and size shown in drawing complete complete all as specified and directed.

(iii) Removing old/brocken unserviceable back of side board and S&F new back as per shape and size shown in drawing of 6 mm thick commercial ply complete all as specified and directed

(iv) Removing old broken/ unserviceable door of side board and S&F new door of Ist class hard wood (teak wood) as per shape and size shown in drawing with piono type hinges complete all as specified and directed.

(v) Removing old broken/ unserviceable drawer of side board and S&F new drawer as per sample, shape and size shown in drawing complete all as specified and directed

(vi) Removing old broken/ unserviceable aluminium handle from the side board and S&F new alumunium handle as per sample, shape and size shown in drawing complete all as specified and directed

(vii) Preparation of old or new surface of side board by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/sprite polish on exposed surface to achieve high class finish complete all as directed

Table writing: (Drg No FD-275,249)

(i) Removing old unserviceable top from table writing and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade typr -II melamine face as per IS-3087, top of teack face and white laminated on other side with 4 mm thickIst class hard wood(teak wood) beading fixed with nails complete all as specified and directed.

(ii) Removing old broken /unserviceable side short rail of table writing and S&F new side short/ long rail made of Ist class hard wood(teak wood)as per shape and size shown in drawing complete all asspecified and directed.

(iii ) Removing old broken /unserviceable side long rail of table writing and S&F new side short/long rail made of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

(iv) Removing old broken/unserviceable legs from table writing and S&F new legs made of Ist class hard wood wood (teak wood) including 04 nos PVC shoes as per shape and size shown in drawing complete all asspecified and directed

(v) S&F wooden bracket of table writing at corners fixing with suitable screw all as specified in drawing & directed.

(vi) Removing old broken / unserviceable back ply of box from table writing and S&F new back ply made of 6 mm thick commercial ply wood as per shape and size shown in drawing complete all as specified and directed.

(vii) Removing old broken / unserviceable shuter of box from table writing and S&F new shuter made of 18 mm thick prelaminated pertical board including one nos magnetic catchter & handle in each shuter all as per shape and size shown in drawing.

(viii) Removing old broken/unserviceable drawer from table writing and S&F new drawer made of as specified in drawing including one nos handle in each drawer all as per shape and size shown in drawing complete all as specified and directed.

(ix) Removing old broken /unserviceable centre stiffner from table writing and S&F new centre stiffener made of Ist class teak woodall as specified in drawing includings one nos handlein each drawer all as per shape and size shown in drawing complete all asspecified and directed.

(x) Removing old broken/ unserviceable side stiffner from table writing and S&F new side stiffener made of Ist class teak wood all as specified in drawings complete all asspecified and directed.

(xi) Preparation of new or old surface of table writing by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/sprit polishing on exposed surface to achieve high class finish complete all as directed.

TABLE DRESSING LADIES WITH MIRROR (Drg No FD-378 & 251)

(i) Removing of old broken/unserviceable looking mirror with frame from the table dressing ladies with mirror and S & F new 5mm thick looking mirror with frame as per sample, shape and size shown in drawing of make - Atul/Modi Guardcomplete all as specified and directed.

(ii) Removing of old broken/unserviceable knob from table dressing ladies and S & F new 40 mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

(iii) Removing old broken/unserviceable sliding glass from table dressing ladies and S & F new 5 mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

(iv) Removing the old broken/unserviceable legs from table dressing ladies and S & F new legs of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(v) Removing old broken/unserviceable sunmica from the top of table dressing ladies and S & F new 0.8 mm thick sunmica of best quality fixed with synthetic adhesive as per shape and size shown in drawing complete all as specified and directed.

(vi) Removing old broken/unserviceable back side of table dressing ladies and S & F new back side as per shape and size shown in drawing complete all as specified and directed.

(vii) Removing old broken / unserviceable drawer from the table dressing ladies and S & F new drawer including PVC Knob as per shape and size shown in drawing complete all as specified and directed.

(viii) Preparation of new or old surfaces of table dressing ladies by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as directed.

TABLE DRESSING GENTS WITH MIRROR (Drg No FD-379 & 230)

(i) Removing of old broken/unserviceable looking mirror with frame from the table dressing gents with mirror and S & F new 5mm thick looking mirror with frame as per sample, shape and size shown in drawing of make - Autul/Modi complete all as specified and directed.

(ii) Removing of old broken/unserviceable sunmica from the top of table dressing gents and S & F new 0.8 mm thick sunmica of best quality fixed with synthetic adhesive as per sample, shape and size shown in drawing complete all as specified and directed.

(iii) Removing old broken/unserviceable back side of table dressing gents and S & F new back side as per shape and size shown in drawing complete all as specified and directed.

(iv) Removing the old broken/unserviceable drawer from table dressing gents and S & F new drawer including PVC Knob as per shape and size shown in drawing complete all as specified and directed.

(v) Removing old broken/unserviceable knob from the top of table dressing gents and S & F new 40 mm size CP Brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

(vi) Preparation of old or new surfaces of table dressing gents by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as directed.

Table Dining 6 Pers (Drg No FD-273)

(a) Removing of old unserviceable top from table dining 6 pers and S&F new top of size 1500 x 900 mm of 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails complete all as specified in drawingand directed.

(b) Removing of old broken/unserviceable side short rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified in drawing and directed.

(c) Removing of old broken/unserviceable side long rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified in drawing and directed.

(d) Removing old broken/unserviceable legs from table dining 6 pers and S&F new legs made of Ist class hard wood (teak wood) including PVC Shoes as per shape and size shown in drawing complete all as specified in drawing and directed.

(e) S&F wooden bracket of table dining at corners fixing with suitable screws all as specified in drawings & directed .

(f) Preparation of new or old surfaces of table dining 6 person by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

TABLE BED SIDE (Drg No FD-276, 248 )

(i) Removing old unserviceable top from table bed side and S & F new top as per shape and size shown in drawing of 18 mm thick of pre-laminated particle board exterior grade type-II melamine face as per IS-3087, top of teak face and white laminated on other side with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails complete all as specified and directed.

(ii) Removing old broken /unserviceable back ply from table bed side and S & F new commercial ply wood 6 mm thick as per shape and size shown in drawing complete all as specified and directed.

(iii) Removing old broken/unserviceable legs from table bed side and S & F new leg of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(iv) Removing old/unserviceable side from table bed side and S&F new side as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade type-II melamine face as per IS-3087, top of teak face and white laminated on other side with nails complete all as specified and directed

(v) Preparation of new or old surface of table Bed side by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/ sprit polishing on exposed surface to achieve high class finish complete all as directed.

TABLE 3'X2' WITH DRAWER

(i) Removing old unserviceable top from table and S&F new top of size 900x600x18 mm thick of prelaminated partical board exterior grade typr -II melamine face as per IS-3087, top of teack face and white laminated on other side with 4 mm thick Ist class hard wood( teak wood) beading fixed with nails complete all as specified and directed.

(ii) Removing old brocken/ unserviceable drawer from table and S&F new drawer as per sample, shape and size shown in drawing complete all as specified and directed.

(iii) S&F PVC shoe all as per shape and size shown on drawing & as directed.

(v) Preparation of old or new surface of table 3'x2' applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/ sprit polishing on exposed surface to achive high class finish complete all as directed.

Table Peg (450 x 300 mm) : (Drg No FD-277,384, 236)

(a) Removing old unserviceable top from table peg and S&F new top of size 450 x 300 mm & 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails as per shape and size shown in drawing complete all as specified in drawings & directed .

(b) Removing old broken/unserviceable side short rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing complete all as specified in drawings & directed .

(c) Removing old broken/unserviceable side long rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing complete all as specified in drawings & directed .

(d) Removing old broken/unserviceable legs of table peg and S&F new legs including 04 Nos PVC shoes of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified in drawings & directed .

(e) S&F wooden bracket at corners fixing with suitable screws complete all as specified in drawings & directed .

(f) Preparation of old or new surfaces of Table peg by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

TABLE CENTRE : (Drg No FD-375, 274,235)

(i) Removing old unserviceable top from table centre and S&F new top of size 900x450 & 18 mm thick of prelaminated pertical board extior grade type-II melamine face as per IS-3087, top of teak face and white laminated on other side with 4 mm thick Ist class hard wood ( teak wood) beading fixed with nails complete all as specified and directed.

(ii) Removing of old unserviceable side short rail of table centre and S&F new side short rail/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(iii) Removing of old unserviceable side long rail of table centre and S&F new side long rail/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(iv) Removing old brocken/ unserviceable legs from table centre and S&F new legs of Ist class hard wood (teak wood) includings 04 nos PVC shoe as per shape and size shown in drawing complete all as specified and directed

(v) S&F wooden bracket at corners fixing with suitable screw all as specified in drawing & directed.

(vi) Removing old broken/ unserviceable centre stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed

(vii) Removing old broken side stifner from S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(viii) Preparation of old or new surface of table centre by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achive high class finish , complite all as directed.

Bed Hard (MAP) : (Drg No FD/E6/MAP/08 (R ))

(a) Removing of old unserviceable prelaminated particle board of Head board and S & F new prelaminated particle board of Head board shall be fitted with 18 mm thick pre-laminated particle board both side decorative duly fitted with PVC edging and complete all as shown on drawing and as directed.

(b) Removing of old unserviceable prelaminated particle board of foot board and S & F new prelaminated particle board of foot board shall be fitted with 18 mm thick pre-laminated particle board both side decorative duly fitted with PVC edging and complete all as shown on drawing and as directed.

(c) Taking down existing unserviceable ply top from the Bed Hard and S&F new ply top 12 mm thick MR grade fitted with steel screw complete all as specified in drawings & directed .

(d) S&F cap all as per shape and size complete all as specified in drawings & directed .

(e)Painting to Bed hard with one coat of black synthetic enamel paint of Ist quality including preparation of old steel surface complete all as specified in drawings & directed (Note :- if any joint of bed is broken same shall be welded & painted to match with existing surface, Rate quoted shall deemed to include this aspect).

Table 3' x 2' without drawer (Drg No FD-42, 55 & 283,284)

(a) Removing old unserviceable top from table and S&F new top of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails complete all as specified in drawings & directed .

(b) Removing old broken/unserviceable side short rail of table and S&F new side short rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified in drawings & directed .

(c) Removing old broken/unserviceable side long rail of table and S&F new side long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified in drawings & directed .

(d) Removing old broken/unserviceable legs from table and S&F new legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes as per shape and size shown in drawing complete all as specified in drawings & directed .

(f) S&F wooden bracket at corners fixing with suitable screws complete all as specified in drawings & directed .

(g) Removing old broken/unserviceable centre stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified in drawings & directed .

(h) Removing old broken/unserviceable side stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

(k) Preparation of old or new surfaces of Table 3'x2' w/o drawer by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

CHAIR verandah :- (Drg No FD-359,256,333)

(a) M&L for recanning of seat & back of chair verandah steel with white plastic cane, 4 mm wide and 0.5 mm thick, weighing not less than 450 Grams per chair (+/-5%)(Plastic cane shall be of Make: Premier or equivalent) with and including 4 Nos. hard rubber shoe shall also be provided to the legs of chair and painting the steel chair verandah frame with one coat of white synthetic enamel paint of Ist quality complete all as specified in drawings & directed .

TABLE COMPUTER (MAP) : (Drg No FD/E6/MAP-03)

(i) Taking down existing unserviceable top form Table computer and S & F new top shall be of 18 mm thick pre laminated particle board edge moulded all around fixed to frame all as shown in drawing and as directed.

(ii) Taking down existing unsericeable side frame from table computer and S & F new side frame shall be of 18 mm thick pre laminated particle board all as shown in drawing and as directed.

(iii) Removing old unserviceable key board from table computer and S & F new key board with telescopic channel as per shape and size complete all as specified and directed.

(iv) Taking down existing unserviceable/broken drawer from table computer and S & F new drawer fixed with telescopic channel to frame complete all as shown on drawing and as directed.

(v)Painting to computer table with one coat of black synthetic enamel paint of Ist quality including preparation of old steel surface complete all as specified in drawings & directed .

Chair dining (MAP) :(Drg No FD/E6/MAP/10)

(a) Removing old broken/unserviceable front legs from chair dining and S&F new front legs of Ist class hard wood (teak wood) including PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.

(b) Removing old broken/unserviceable rear legs from chair dining and S&F new rear legs of Ist class hard wood (teak wood) including PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.

(c) Removing old broken/unserviceable side rail from chair dining and S&F new side rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(d) Removing old broken/unserviceable front rail from chair dining and S&F new front rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(e) Removing old broken/unserviceable back rest from chair dining and S&F new back rest of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(f) Removing old broken/unserviceable centre stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(g) Removing old broken/unserviceable side stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

(h) S&F wooden bracket at corners fixing with suitable screws all as specified in drawings & directed .

(i) Removing old unserviceable foam from chair dining and replacing from 75 mm thick ,32 density with new PU foam of make: Sleepwell/Kurlon from seat of chair dining and foam shall be covered with cotton tapestry cloth of range not less than Rs.350.00 per meter, colour, shade and quality of tapestry shall be as approved by GE complete all as specified and directed.

(j) M&L for polishing of all repaired chairs with high class french/ sprit polish till glossy finish is obtained complete all as specified and directed.

M/S Kumar Contractors

ROHIT ENTERPRISES

M/S JAI BALAJI TRADERS