Annual Rate contract for Repair Rewinding Routine Maintenance of Various Pump Machinery and Control System as per Scope of Work under PHED Sub Division Kherwara under PHED Distt Rural Division II Udaipur

Repairing and Rewinding of Motor pumps

Submersible Motor Pumps

1. The cost of repair of motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of bushes (oil seal bush) Nut Bolts, washers, seals cable seal cable gland ring, vent plug, water drain plug, etc. The cost of all other required parts includes in rates of rewinding except items shown separately in schedule of spares.

2. The rates for replacement of bushes include the cost of replacement of both the upper and lower bearing bushes along with their sleeves etc. under normal condition.

3. The rates for replacement of thrust bearing include the cost of all the components connected with thrust bearing.

4. Each pump and motor repairing and rewinding shall be guaranteed for 6 months as per departmental norms.

5. Old material including PVC wire shall be deposited in Divisional store.

Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring, vent plug, water drain plug, etc. complete job

Up to 3 HP V-6

Above 3HP to 5 HP V-6

Above 5HP to 7.5 HP V-6

Above 7-5 HP to 10 HP V-6

Above 10 HP to 12.5 HP

Above 12.5 HP to 15 HP

Above 15 HP to 17.5 HP

Above 17.5 HP to 20 HP

Motor opening cable jointing & refitting charges when rewinding is not required.

Schedule of spares and repair of submersible motor :

Particulars of spare parts of submersible Motor

Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves

Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing.

Replacement of thrust plate for all types of motors

PART (B): REPAIR OF SUBMERSIBLE PUMP

The rates for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys and testing of pumping sets at rated head and discharge etc.

Old material shall be deposited in Divisional store.

SCHEDULE OF SPARES & REPAIR OF SUBMERSIBLE PUMP :

Supply and fixing spare parts for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys etc. complete.

Providing & fixing of GM neck rings parts on impeller.

Plain Type V-6

Bowel typeV-6

Plain Type V-8

Bowel typeV-8

Providing & Fixing of GM/SS bush per piece

Plain Type V-6

Bowel typeV-6

Plain Type V-8

Bowel typeV-8

Providing & replacement of G.M. Impeller

Plain Type V-6

Bowel typeV-6

Plain Type V-8

Bowel typeV-8

Providing & replacement of Nylon Impeller

Plain Type V-6

Bowel typeV-6

Plain Type V-8

Bowel typeV-8

Providing & fixing CI Diffuser/ guide vans per piece

Providing & fixing Gun metal Diffuser/ guide vans per piece

Providing & fixing Nylon Diffuser/ guide vans per piece

Providing & fixing Microlone Guide per piece

Providing & fixing of CI body per piece

Plain Type V-6

Bowel typeV-6

Plain Type V-8

Bowel typeV-8

Pump opening & fixing including machining & all finishing work for desired performance

Plain Type V-6

Bowel typeV-6

Plain Type V-8

Bowel typeV-8

Impeller welding & turning (if not replaced)

Plain Type V-6

Bowel typeV-6

Plain Type V-8

Bowel typeV-8

Single Phase Motor Pumps

PART(A): FOR REPAIR OF SUBMERSIBLE MOTOR (SINGLE PHASE) :

1. The cost of repair of motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of bushes, Nut Bolts, washers, seals cable seal cable gland ring, vent plug, water drain plug, etc. The cost of all other required parts includes in rates of rewinding except items shown separately in schedule of spares.

2. The rates for replacement of bushes include the cost of replacement of both the upper and lower bearing bushes along with their sleeves etc. under normal condition.

3. The rates for replacement of thrust bearing includes the cost of all the components connected with thrust bearing.

4. Old material including PVC wire shall be deposited in Divisional store.

Repair Rewinding of single phase Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of bushes (oil seal bush) Nut Bolts, washers, cable seal set, cable gland ring, vent plug, water drain plug, etc. complete.

up to 2 HP V-4

Above 2HP to 3 HP V-4

Above 3HP to 4 HP V-4

Schedule of spares and repair of single phase submersible motor:

Providing and fixing of spare for Single Phase submersible motor.

Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves

Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing.

Replacement of thrust plate for all types of motors

Motor opening cable jointing & refitting charges when rewinding is not required each motor

Proving & fixing of motor pump coupling housing set

PART (B): REPAIR OF SINGLE PHASE SUBMERSIBLE PUMP

The rates for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys etc.

SCHEDULE OF SPARES & REPAIR OF SINGLE PHASE SUBMERSIBLE PUMP :

Repairing of submersible single phase pump sets

Providing & Fixing of GM/SS bush per piece

Providing & replacement of PVC Impeller

Providing & fixing GM Diffuser per piece

Providing & fixing Microlone Guide per piece

Providing & fixing of Bowl per piece

Pump opening & fixing including machining & all finishing work for desired performance

Providing & fixing NRV

Providing & fixing D.O.

Providing & fixing of S.S. shaft up to 2 HP

Above 2HP to 4 HP

Repairing & Rewinding of Monoblock/ Centrifugal pump set

1. The cost of repair of motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. For rewinding items the cost of copper wire shall be added separately as per actual requirement of copper wire in particular motor.

2. Each pump and motor repairing and rewinding shall be guaranteed for 6 months as per departmental norms.

3. Old material including copper wire shall be deposited in Divisional store.

PART (A): REPAIR AND REWINDING OF MONOBLOCK PUMPS

Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge.

SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP)

Connection Plates

up to 10 HP

10 HP to 20 HP

Cooling Fan

up to 10 HP

10 HP to 20 HP

GM/SS bush

Upto 10 HP

10 HP to 20 HP

Mechanical reconditioning of Bearing sheet

Upto 10 HP

10 HP to 20 HP

Mechanical reconditioning ofImpeller sheet and Key way slot

Upto 10 HP

10 HP to 20 HP

Oil seal

Upto 10 HP

10 HP to 20 HP

Labour charge for opening and fitting of pump sets

Upto 10 HP

10 HP to 20 HP

Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (Including cost of copper wire) 'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump sets and transportation to and fro from installation site complete as per direction of engineer in charge at site.

Above 15.00 HP but upto 17.50 HP

Above 17.50 HP but upto 20.00 HP

Above 20.00 HP but upto 25.00 HP

Above 25.00 HP but upto 30.00 HP

Above 30.00 HP but upto 35.00 HP

Above 35.00 HP but upto 40.00 HP

Above 40.00 HP but upto 45.00 HP

Above 45.00 HP but upto 50.00 HP

Above 50.00 HP but upto 60.00 HP

Above 60.00 HP but upto 75.00 HP

Above 75.00 HP but upto 100.00 HP

SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP)

Connection Plates

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Cooling Fan

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Fan Cover

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

G.M./SS Gland Guide Bush

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Shaft with Sleeve Chuck Nut

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Shaft Chuck Nut

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

G.M. Neck Ring

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Bush Shaft Sleeve of G.M.

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

G.M. Gland Cover

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

S.S. Shaft (Non Magnetic)

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

G.M. Shaft Sleeve Check Nut

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

M.S. Shaft Check Nut

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Cooling pipe set with nozzle & Nut

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

AIR Cock

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

JOB WORK FOR REPAIR OF PUMP MOTOR

Bearing Housing (rebuilding, turning & finishing)

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Bearing Cap (rebuilding, turning & finishing)

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Impeller Reconditioning for all type of Pump

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Labour Charges for Dismantling & Assembling of Pump

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Coupling with stud and rubber bush

5 HP to 20 HP

20 HP to 30 HP

30 HP to 50 HP

Above 50 HP to 100 HP

Supply & Fixing of tyre coupling sets according to relevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge.

Type 14 Nos. set

Type 15 Nos. set

Type 16 Nos. set

Type 17 Nos. set

Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC.

6304 or equivalent size

6305 or equivalent size

6306 or equivalent size

6307 or equivalent size

6308 or equivalent size

6309 or equivalent size

6310 or equivalent size

6311 or equivalent size

6312 or equivalent size

6316 or equivalent size

6317 or equivalent size

6318 or equivalent size

6319 or equivalent size

NU319C or equivalent size

Suuplying of super enamal copper wire suitable for rewindind of induction motor (only procured for motor rewinding)

Preventive Mintenance

Routine maintenance of centrifugal coupled pump and motor including opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job

5 HP to 20 HP

20 HP to 30 HP

Above 30 HP and up to 50 HP

Above 50 HP and up to 100 HP

Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job.

Cleaning of Electric Panel PMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job.

Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job.

5 HP to 20 HP

Above 20 HP and up to 30 HP

Above 30 HP and up to 50 HP

Above 50 HP and up to 100 HP

Repairing of electric panel, starters

Labour charges for removing electric fault in wiring / making connection through lugs (with the help of cramping tool) of motor pump set with starter at headworks of water supply scheme/Tubewell/ openwell including cost of insulation tape etc..

Labour charges for replacement of defective ampere meter / volt meter with new one on existing panel board in pump house./Tubewell /openwell (new voltmeter/ampere meter will be provided by department

Labour charges for repairing of starter at site including opening and reassembling of starter with labour charges for replacing of defective parts with new one at site.(Parts will be supplied by Depatment)

Supply & filling starter oil in oil immersed starters at site.

Notes : Rates of Complete items are inclusive of cost of all labour, material, T & P & transportation charges

Please Enable Macros to View BoQ information