REPAIR TO BOUNDARY WALL DRAIN FOOT PATH HARD STANDING ETC IN ZONE II AREA UNDER GE MCEME SECUNDERABAD

Amount

Demolition of reinforced cement concrete of any descritpion complete all as specified and directed by Engineer-in-Charge

M&L for precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in man hole cover slabs etc including necessary form work and set in CM 1:6, complete all as specified and as directed. Note:- Reinforcement will be measured and paid seperately

M&L for Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key and scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge

M& L for rendering 15 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finsished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on surfaces of walls complete all as specified and directed by Engineer-in-Charge

M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as specified and directed by Engineer-in-Charge

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge

M&L for 100mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) to flooring finishing the surface fair and even complete all as specified and directed by Engineer-in-Charge

M&L for Machine pressed precast conctete interlocking paver block fixed with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engineer-in-Charge

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge

M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed by Engineer-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (including backing coat backing ) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 10mm thick in cm (1:3) finished rough to receive wall tiles complete all as specified and directed by Engineer-in-Charge.

M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles 300x200x 7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete block masonry, built in cement mortar incl all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge

M&L for precast cement concrete Type C-11:3:6 (using 20mm graded stone aggregate) solid block masonry exc 10 cm in width and set in CM 1:6 complete all as specified and directed by Engineer-in-Charge

S&F in repairs plastic water closet seat cover white/coloured, closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge

Dismantling posts or struts (wood,steel or RCC) any section including taking out embeded portion and making good disturbed ground , post embeded in concrete ,brickwork complete all as specified and directed by Engineer-in-Charge

Dismantling of structural steel members such as channels angle iron flat etc and steel sections of any description by gas cutting or othermeanscomplete all as specified and directed by Engineer-in-Charge

M&L for Mild Steel fencing posts, studs ,' Y ' juctions including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge

M&L for painting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new surfaces complete all as specified and directed by Engineer-in-Charge

S&F in Repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-Charge

Dismantling of chain link fencing/expanded metal any thickness or mesh fixed with steel frame work of any weight complete all as specified and directed by Engineer-in-Charge

Supply only galvanised chain link fencing, any size or type(as approved by Engineer-in-charge), complete all as specified and directed by Engineer-in-Charge (Fixing is covered under subsequent item)

Fixing only chain link fencing including line wires, any mesh, size and type to any of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed by Engineer-in-Charge

M&L Mild steel bars 10mm dia round and over, cut to length, bent to shape required, including cranking, bending spirally for as in line wire for straining fencing Gd I IS 432 (part-I) complete all as specified and directed by Engineer-in-Charge

S&F MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exceeding 5cm and not exceeding 10cm long and dia of neck 11 to 15 mm complete all as specified and directed by Engineer-in-Charge

S&F in repair viterous china wash down closet pan (pedestal pattern) including connection to drain and flushing pipe etc and plastic seat cover and complete all as specified and directed by Engineer-in-Charge

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified and directed by Engineer-in-Charge

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200/225mm dia pipe complete all as specified and as directed.

All as per Sl item No. 32 above, but for 150mm dia complete all as specified and directed by Engineer-in-Charge

B AND H CONSTRUCTIONS

M/S DIVIJA BUILDERS

NEWS CONSTRUCTIONS

G SATISH REDDY AND CO