SITC of Electrical and Mechanical equipments at WSS Narbal

Amount

Fabrication, Providing and fitting of Modular motor control panel of appropriate size fabricated out of 14 SWG sheet having required openings/vents and protection Class : IP-55 & fitted with accessories as under a) Busbar Chamber: The busbar chamber shall be fitted at the top of the panel horizontally throughout the length. There shall be 3 Nos. of phase bus bar and 1 No neutral bus bar and 1 No earthing bus bar. The bus bars shall be air insulated and made-up of high conductivity COPPER with current density of suitable rating for 400 Ampere. All panel compartments shall be provided with suitable cable alley and vertical bus bar alley. Suitable segregation shall be provided in between busbar chamber and adjoining compartments. The bus bar shall be PVC sleeved with color strips of red, yellow, blue and black and the same be arranged in accordance with IS-375 specs. Electrical clearances shall be maintained between phases, neutral and body as per standards (Rest Technical Specifications as per Annexure A)

Fabrication, Providing and fitting of Modular motor control panel of appropriate size fabricated out of 14 SWG sheet having required openings/vents and protection Class : IP-55 & fitted with accessories as under a) Busbar Chamber: The bus bar chamber shall be fitted at the top of the panel horizontally throughout the length. There shall be 3 Nos. of phase bus bar and 1 No neutral bus bar and 1 No earthing bus bar. The bus bars shall be air insulated and made-up of high conductivity COPPER with current density of suitable rating for 200 Ampere. All panel compartments shall be provided with suitable cable alley and vertical bus bar alley. Suitable segregation shall be provided in between bus bar chamber and adjoining compartments. The bus bar shall be PVC sleeved with color strips of red, yellow, blue and black and the same be arranged in accordance with IS-375 specs. Electrical clearances shall be maintained between phases, neutral and body as per standards. (Rest Technical Specifications as per Annexure A)

VOLTAGE STABLIZER:- Providing, fitting, testing and commissioning of 150KVA, manually operated voltage stabilizer. The Voltage Stabilizer of 150 KVA (Copper Wound), shall be of following specifications: The voltage stabilizer shall be manually operated, oil cooled suitable to work on three phase, 50 Hz±3% Ac supply. The voltage stabilizer shall have transformer coils wound out of fiber glass tapped insulated electric grade copper strips with tapping at required intervals. The number of turns of coils and number of conductors in each turn with their size shall be of adequate design to withstand rated load. Cotton / paper material shall be used for insulating of copper strip coils. The core cell of Voltage Stabilizer shall be assembled out of 52/92 grade silicon steel laminated sheets held together securely with the help of angle iron bracing and tightened with the help of galvanized nuts and bolts. The copper coils shall be inserted into three limbs of the cell and held firmly but duly insulated. The taping terminals shall be kept on all sides of the cells. The transformer cell shall be housed in a sheet metal tank made out of 4mm thick MS Sheets duly strengthening with stiffeners of MS flat /angle. The tank/ container shall be painted with two coats of steel primer both inside and outside and then with two coats of super enamel paint, synthetic gray from outside the container. The tank/container shall be provided with suitable cooling pipes to dissipate the heat generated from vent pipe at the top and drain pipe at the bottom with a plug. Hooks of proper size for lifting of stabilizer shall have to be provided on the top of the tank. The container of the voltage stabilizer shall be mounted on wheels for easy shifting /positioning. The stabilizer shall have suitable insulated lugs of appropriate size for cable connections. The indicating glass of the transformer oil level shall be provided on the transformer body. (Rest Technical Specifications as per Annexure A)

Providing, fitting, testing and commissioning of (L.T) XLPE 95 mm2 Armoured Al. Cable of 1.1 KV grade conforming to IS: 7089 part 1st with following characteristics: Conductor Nominal cross sectional area : 3 x 95+50 mm2 Min. Number of wires : 3 ½ Nominal thickness Insulation : 1.10mm Outer sheath : 1.56mm Make : Havells / L&T or equivalent

Supply & Installation of 1000 VA Microtek /Luminous or equivalent make inverter along with 12 volt 150 AH Exide/Luminous or equivalent make battery complete with leads terminals & thimbles. The job also includes all the charges on account of carriage, wiring and arrangement of skilled labour for installation of inverter.

Providing and fitting of 50 Sq.MM copper conductors, single core, PVC insulated, sheathed, 440 volts grade for inter-confectioning of the equipment’s like LT panel, voltage stabilizer, starter, motor etc. The job includes laying and fitting of suitable cable tray system in the station for laying/fitting of cable in air or as required as per the site condition with proper clamping etc. The job includes crimping of the terminal ends of the conductor with hydraulic crimping tool and providing and fitting of copper conductor sockets/thimbles of suitable size/ rating. The conductor shall be as per relevant IS specifications/standards.

Providing/Fitting of 150 mm width Steel perforated cable trays along with duct ,bends for accommodating interconnection cable

Supply, Installation, Testing & Commissioning of Non Clog Submersible Pumping equipment as per IS 5600.  PUMP:- • Make : Darling/ Wilo /KSB/ Kirlosker. • Discharge : 20000-25000 GPH • Head : 10-15 Meters • Speed : 1440 Rpm • Type of pump : Submersible Pump • Quality of Water to be handled : Raw water.  METERIAL OF CONSTRUCTION: • Pump Casing : Cast Iron/SS • Impeller : Stainless Steel • Pump Shaft : Stainless Steel • Motor Body : Cast Iron • Sealing : Dual mech. seal (Rest Technical Specifications as per Annexure A)

Supply, installation, testing and commissioning of Horizontal pumping unit as per relevant IS code and of following specifications:- Pump:- Make:- Kirlosker /Mather Platt. Discharge:- 15000 GPH Head:- 30 Mtrs Speed : 1440 rpm Type of pump: Horizontal Split casing Impeller : Bronze Pump Casing: Cast Iron Quality of water to be handled :- Cold clear Water (Rest Technical Specifications as per Annexure A)

Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications: - Composition: Rubber (synthetic mats for electrical purpose) Thickness :- 2.50mm Size : - 1M wide. Make :- Safe Volt/Joyti or any other reputed make. The rubber mats shall be accepted with manufacturers test certificate.

Providing of tool kit comprising of Flat Spanner 14-27 No (07 Pieces), Ring spanner set 14-27 No (07 pieces), 10” screw Driver,Hammer-1.5 Kg, H/D Plier,24” pipe ranch ,The tools shall be of Tap aria /Ambika or equivalent make Provided in canvas bag. The Job also Includes Providing of Chargeable lantern of Andslite make 02 nos, 06 no PVC chairs Prima /Cello or equivalent make along with PVC Table, 15 ltrs. Bucket & mug, 3 Ltrs. pressure cookers, 3 ltrs. Rice Cooker ,5 no steel plates & glasses,10 mm Thermo cool for operators quarter having size of 12’x14’,bedding/Exel matting for the operators quarter of 12x14 size ,02 no.blankets,02 no pillows, 02 no quilts/ Razie, 2 no mattress.

Supply and fitting of 11 KV polymeric composite pin insulator 12 KV, 5KN, Lighting impulse 75KV Positive, and 80 KV Negative , creepage distance 320 mm

Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, single break provided with locking arrangement at both ON and OFF position consisting of HT post double insulator, copper or copper alloy high pressure heavy contact assembly, rod with bearings , operating handle and 2 length of 32mm dia. GI pipe conforming to IS 1818 1961, 06 No. of insulators, rated voltage 11KV 200A complete as per IS specs.

Supply, Installation, Testing and commissioning of 11KV polymer fuses Set Horn Gap 3-phase 200 A suitable for vertical installation

Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class, 10KA, 9KV, LA With polymer housing, Station Type.

Supply and fitting of 11 KV polymeric composite disc insulator 12 KV, min falling load 45 KN ,Lighting impulse 75KV Positive, and 80 KV Negative , creepage distance 320 mm

Providing and fitting of heavy duty 11 KV Link set with copper grips suitable for 11 KVA near tapping point & at substation so as to ensure safety during maintenance of the HT line. The job includes cost on account of labour, handling, and carriage. The old scrap will be dumped at site

P/F of 11KV cable termination kit for connecting 35 sq mm XLPE cable (ABC) type with the existing HT line near tapping point and HT transformer

Providing, Installation of earthing station comprising of company fabricated earthing electrodes as per IS: 3043. The job includes Auguring of bore of required dia. / depth for installation of electrode along with black fill compound mixed with soil and all other items required thereof for achieving the best result The job includes connecting of electric gadgets, DG set through GI stripe making of surface structure in brick / cement concrete material as per drawing annexure. Safe earthing electrode size 80 mm dia. length - 2000mm Blackfill - 30 Kg Model / make - JMV-392, Ashlok, Recons

M/S RELIANCE ELECTRICALS

BHAT SALES CORPORATION

ideaxa infratech pvt ltd

M/S WASEEM TRADERS

Hydro Engineers