15th SFC 2024-2025 in Rayagiri Town Panchayat

Amount

Earth work excavation in all classes of soil such as hard stiff clay, light black cotton, shalles, muram except hard rock including all charges etc., complete as per SS20 B.

Plain cement concrete Using 1:4:8 mix ( One cement , four Crushed Stone Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

RR masonary in CM 1:5 mix using rough stone including cost and conveyance of all materials to site with all leads of pure water for curing and all labour charges and all other incidental charges etc complete

Brick work in CM 1:3 (one cement & Three Crushed Stone Sand (M- Sand) using ground moulded chamber bricks of size 9"X4 3/8"X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft

Centering and shuttering for soffits of all RCC work including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc complete

Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3

Reinforced cement concrete 1:11/2:3 (one cement one and half Crushed Stone Sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete

Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete.

Supply and delivery of Submersible motor AS PER IS 8034/2002 with ISI make 75lpm x 50m Head

Supply and delivery of Pannel board suitable for 1.50 HP single phase Submersible motar with ISI make

Supply and delivery of XLPE INSULATED AND SHEATHED 2.5 Sqm, 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990

Supply and delivery and fixing of 1000 L HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labourcharges for fixing of the GI pipes andspecials for pipe connection works including cutting, threading and fixing charges etc.

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supply and delivery of following materials 32 mm GI pipe B class

20mm pvc pipe

20mm GI pipe

32mm HDPE hose pipe

Nylon rope

15mm tap

Earthing as per pwd standard including all charges etc..complete SD 212

Supply of steel door to (0.75*1.8)m size including cost and all labour charges and all other incidental charges etc complete.

Painting in two coats with approved Emulsion paint including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc complete

Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A

Wiring with 2x1.5sq.mm .(22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) SD17

Supply and run of 2of1.5sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V gradeon 7/20 GI bearer wire for service connection mains SD 64

15W LED Bulb with Doom

Ramar (BID ID -1229008)