Shifting Diversion and Re-erection of existing 11 KV line LT Line HT LT line at 04 nos. Different Locations due to Construction Improvement of Sama Sikula RD Road in the dist.of Ganjam.

9Mtr long 300Kg PSC Pole for SLD 1

116X100mm RS joist (09 Mtr long) (23.0 kg PER METER) (Each 207kg) for SLD 1

Lt Stay Set for SLD 1

LT Stay Insulator for SLD 1

LT Stay Clamp (1.4 Kg/pair) for SLD 1

7/10 SWG Stay Wire Grade-2 for SLD 1

AB CABLE (3X50+1X35) MMSQ for SLD 1

RCC Base plate for support for SLD 1

GI Base plate for support 20Kg for RS Joist pole for SLD 1

Earthing Of Support (Coil Type) for SLD 1

LT Distribution Box Polycarbonate for SLD 1

Pole clamp for eye hook for XLPE / AB Cable for SLD 1

Conductor dead end clamp for bare massenger XLPE / ABC (25-70 sqmm) for SLD 1

Suspension clamp with eye hook for ABC for SLD 1

Eye hook for conductor dead end clamp for SLD 1

Insulated Piercing connector Type A main 16 to 95 sqmm to tap 16 to 95 sqmm for SLD 1

Insulated Piercing connector Type B main 16 to 95 sqmm to tap - 2.5 to 10 sqmm for SLD 1

Neutral connector Type B suitable for main 35-70 sqmm AAAC & TAP -2.5 to 10 sqmm service cable cover by black weather resistant insulation cover for SLD 1

GI Bolts Nuts and washers for SLD 1

Sundries for danger board,anti climbing device etc. for SLD 1

Stay concreting in ratio 1:2:4 (0.5x0.5x0.8)mtr.(a) for SLD 1

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.375Cu.mtr(b) for SLD 1

Couping of poles in ratio 1:1.5:3 (500X500X475)= 0.11875 Cu mtro© for SLD 1

Dismantaling of LT 9Mtr Long PSC pole = 07Nos., LT AB Cable = 480Mtrs. for SLD 1

WPB 160x152 (30.44KG/Mtr.),11 mtr- with base plate 300x300x12 for SLD 1

Earthing Of Support (Coil Type) for SLD 1

11KV V Cross arm (10.2 Kg ) GI for SLD 1

GI Back Clamp for V Cross Arm (0.85 Kg ) for SLD 1

11 KV F clamp 2.9 Kg for SLD 1

11KV Pin insulator Polymer for SLD 1

No.6 G.I wire for (Dia-4.8mm) (0.182Kg/mtr) Guarding for SLD 1

No.8 G.I wire for cross lacing(0.131Kg/mtr) for SLD 1

No.10 G.I wire for cross lacing binding (0.08Kg/mtr) (2F /lacing *40 /3.28) for Guarding) for SLD 1

No.6 G.I wire for Guarding earthing for SLD 1

75X40X6mm. MS Channel for straight cross arm (1.5m X8 pcs) (6.8Kg/mtr.) + Galvanisation charges for 01Nos. Guarding for SLD 1

G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device for guarding for SLD 1

Eye hook for SLD 1

Danger Board for SLD 1

GI Clamp for Danger Board GI Flat(25X3 @0.6 Kg/Mtr) 510 mm length(0.306 Kg/Piece) for SLD 1

GI Barbed Wire anticlimbimg device 3. kg per support for SLD 1

GI clamp for anti Climbing Devicev25X3 mm Flat (0.6 Kg /Mtr) Flat of 0.510 Mtr Length for SLD 1

GI Nut,Bol & washer for SLD 1

Sundries to complete the job etc for SLD 1

Concreting of poles in ratio 1:1.5:3 (500mm×500mmX1800mm) = 0.45Cu.mtr (11mtr WPB/RS Joist/H Pole) for SLD 1

Couping of poles in ratio 1:1.5:3 = 0.1125 Cu. mtr for SLD 1

Materials for masonary work for earth pit Charcoal salt etc for earthing of guarding for SLD 1

Dismantaling of HT PSC poles 09Mtr long = 02Nos. for SLD 1

116X100mm RS joist (09 Mtr long) (23.0 kg PER METER)(Each 207kg) for SLD 2

GI Base plate for support 20Kg for RS Joist pole for SLD 2

Earthing Of Support (Coil Type) for SLD 2

LT Distribution Box Polycarbonate for SLD 2

Pole clamp for eye hook for XLPE / AB Cable for SLD 2

Suspension clamp with eye hook for ABC for SLD 2

Insulated Piercing connector Type A main 16 to 95 sqmm to tap 16 to 95 sqmm for SLD 2

Insulated Piercing connector Type B main 16 to 95 sqmm to tap-2.5 to 10 sqmm for SLD 2

Neutral connector Type B suitable for main 35-70 sqmm AAAC & TAP -2.5 to 10 sqmm service cable cover by black weather resistant insulation cover for SLD 2

GI Bolts Nuts and washers for SLD 2

Sundries for danger boardanti climbing device etc. for SLD 2

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.375Cu.mtr(b) for SLD 2

Couping of poles in ratio 1:1.5:3 (500X500X475)= 0.11875 Cu mtr for SLD 2

Dismantaling of LT 9Mtr Long RS Joist pole = 03Nos. for SLD 2

10mtr long 330kg PSC pole for SLD 2

WPB 160x152 (30.44KG / Mtr.),11m tr- with base pla te 300x300x12 for SLD 2

Earthing Of Support (Coil Type) for SLD 2

RCC Base plate for support for SLD 2

11KV V Cross arm (10.2 Kg ) GI for SLD 2

GI Back Clamp for V Cross Arm (0.85 Kg ) for SLD 2

11KV F clamp 2.9 Kg · for SLD 2

Top Bracke t 100X50mm GI channel(02 Kg each) for SLD 2

100X50X6mm. MS Channel for straight cross arm (1.2m X 4 pcs)on each pole (9.2Kg/ mtr.) for tapping & cut point pole + Galvanisation charges for SLD 2

11KV Disc insulator (T& C) 45 KN, Polymer for SLD 2

11KV H/W fitting (T & C) type 45 KN for SLD 2

11KV Pin insulator Polymer for SLD 2

H.T Stay set (Complete) for SLD 2

Stay Insulator for SLD 2

Stay clamp or Stud Clamp for SLD 2

7/10 SWG stay wire for SLD 2

No.6 G.I wire for (Dia-4.8mm) (0.182Kg/mtr) Guarding for SLD 2

No.8 G.I wire for cross lacing (0.131Kg/mtr) for SLD 2

No.10 G.I wire for cross lacing binding (0.08Kg/mtr) (2F/lacing * 40 /3.28) for Guarding) for SLD 2

No.6 G.I wire for Guarding earthing for SLD 2

75X40X6mm MS Channel for straight cross arm (1.5m X8 pcs) (6.8Kg/mtr.) + Galvanisation charges for 01Nos. Guarding for SLD 2

G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device for guarding for SLD 2

Eye hook for SLD 2

Danger Board for SLD 2

GI Clamp for Danger Board GI Flat(25X3 @0.6 Kg/Mtr) 510 mm length(0.306 Kg/Piece) for SLD 2

GI Barbed Wire anticlimbimg device 3. kg per support for SLD 2

GI clamp for anti Climbing Devicev25X3 mm Flat (0.6 Kg /Mtr) Flat of 0.510 Mtr Length for SLD 2

GI Nut,Bol & washer for SLD 2

Sundries to complete the job etc for SLD 2

Stay/Strut Pole concreting in ratio 1:2:4 (0.5x0.5x0.8) = 0.2Cu.mtr

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX 1800mm) 0.45 cu mtr.

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX 1660mm) 0.415 cu mtr

Couping of poles in ratio 1:1.5:3 (500X500X475)= 0.11875 Cu mtr

Materials for masonary work for earth pit Charcoal ,salt etc for earthing of guarding for SLD 4

Dismantaling of HT PSC poles 3 Nos & RS Joist pole 3 Nos

9Mtr long 300Kg PSC Pole for SLD 3

RCC Base plate for support for SLD 3

Earthing Of Support (Coil Type) for SLD 3

LT Distribution Box Polycarbonate for SLD 3

Pole clamp for eye hook for XLPE / AB Cable for SLD 3

Suspension clamp with eye hook for ABC for SLD 3

Insulated Piercing connector Type B main 16 to 95 sqmm to tap - 2.5 to 10 sqmm for SLD 3

Neutral connector Type B suitable for main 35-70 sqmm AAAC & TAP -2.5 to 10 sqmm service cable cover by black weather resistant insulation cover for SLD 3

GI Bolts Nuts and washers for SLD 3

Sundries for danger board anti climbing device etc. for SLD 3

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.375Cu.mtr(b) for SLD 3

Couping of poles in ratio 1:1.5:3 (500X500X475)= 0.11875 Cu mtr@ for SLD 3

WPB 160x152 (30.44KG/Mtr.)11 mtr- with base plate 300x300x12 for SLD 3

Earthing Of Support (Coil Type) for SLD 3

11KV V Cross arm (10.2 Kg) GI for SLD 3

GI Back Clamp for V Cross Arm (0.85 Kg) for SLD 3

11 KV F clamp 2.9 Kg for SLD 3

11KV Pin insulator Polymer for SLD 3

Danger Board for SLD 3

GI Clamp for Danger Board GI Flat(25X3 @0.6 Kg/Mtr) 510 mm length(0.306 Kg/Piece) for SLD 3

GI Barbed Wire anticlimbimg device 3 kg per support for SLD 3

GI clamp for anti Climbing Devicev25X3 mm Flat (0.6 Kg /Mtr) Flat of 0.510 Mtr Length for SLD 3

GI NutBol & washer for SLD 3

Sundries to complete the job etc for SLD 3

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX 1800mm) = 0.45Cu.mtr (11mtr WPB/RS Joist/H Pole) for SLD 3

Couping of poles in ratio 1:1.5:3 = 0.1125 Cu. mtr for SLD 3

116X100mm RS joist (09 Mtr long) (23 kg per meter)(Each 207kg) As strut pole for SLD 4

WPB 160×152 (30.44KG/Mtr.),11 mtr- with base plate 300×300×12 for SLD 4

Earthing Of Support (Coil Type) for SLD 4

55mm2 All Alloy Aluminum Conductor.AAAC(To be re-used) for SLD 4

55mm2 All Alloy Aluminum Conductor.AAAC(for wastage & binding) for SLD 4

PG clamp for 55mm2 AAA conductor for SLD 4

11KV V Cross arm (10.2 Kg ) GI for SLD 4

GI Back Clamp for V Cross Arm (0.85 Kg ) for SLD 4

11 KV F clamp 2.9 Kg for SLD 4

Top Bracket 100X50mm GI channel(02 Kg each) for SLD 4

100X50X6mm. MS Channel for straight cross arm (1.2m X 6 pcs)on each pole (9.2Kg/mtr.) for tapping & cut point pole + Galvanisation charges for SLD 4

11KV Disc insulator (T& C) 45 KN, Polymer for SLD 4

11KV H/W fitting (T & C) type ,45 KN for SLD 4

11KV Pin insulator Polymer for SLD 4

H.T Stay set (Complete) for SLD 4

Stay Insulator for SLD 4

Stay clamp or Stud Clamp for SLD 4

7/10 SWG stay wire for SLD 4

No.6 G.I wire for (Dia-4.8mm)(0.182Kg/mtr) Guarding for SLD 4

No.8 G.I wire for cross lacing(0.131Kg/mtr) for SLD 4

No.10 G.I wire for cross lacing binding (0.08Kg/mtr) (2F /lacing * 40 /3.28) for Guarding) for SLD 4

No.6 G.I wire for Guarding earthing for SLD 4

75X40X6mm. MS Channel for straight cross arm (1.5m X8 pcs) (6.8Kg/mtr.) + Galvanisation charges for 01Nos. Guarding ) for SLD 4

G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device for guarding for SLD 4

Eye hook for SLD 4

Danger Board for SLD 4

GI Clamp for Danger Board GI Flat(25X3 @0.6 Kg/Mtr) 510 mm length(0.306 Kg/Piece) for SLD 4

G I Barbed Wire anticlimbimg device 3. kg per support for SLD 4

GI clamp for anti Climbing Devicev25X3 mm Flat (0.6 Kg / Mtr) Flat of 0.510 Mtr Length for SLD 4

GI Nut, & washer for SLD 4

Sundries to complete the job etc for SLD 4

Stay/Strut Pole concreting in ratio 1:2:4 (0.5x0.5x0.8) = 0.2Cu.mtr for SLD 4

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX 1800mm) for SLD 4

Couping of poles in ratio 1:1.5:3 - 0.1125 Cu, mtr for SLD 4

Materials for masonary work for earth pit Charcoal ,salt etc for earthing of guarding for SLD 4

Dismantaling of HT RS Joist poles 11Mtr long - 22Nos. and 09Mtr. Long . 01No. 55mmsq AAAC . 1.15CKM. for SLD 4

Please Enable Macros to View BoQ information