Renovation of existing Room for M C Lab in Rani Jhansi Park in ward No 15

Amount

P/F Aluminium Tublar Vertical and Horizontal Pillar Side wall Door 25x40mm

P/F A.C.P. 6 mm

P/F aluminium tube 75x40mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 100mm

Providing and fixing ISI marked aluminium tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing vitreous china water closet squatting pan (English type sheet W.C. pan)size 580mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately) – Orrissa pattern

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

P/F 15 mm C.P. brass tap

P/F CP brass angle cock 15 mm

Providing and fixing G.I. pipes complete with G.I. Fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore

Providing and fixing P.V.C. Pipe (Tube) 100mm dia

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in:- Cement Mortar 1:4(1Cement:4 Sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: racking out the old putty: Float glass panes of thickness 4 mm (weight not less than 10kg/sqm).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing rolled cold M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)

Providing and fixing 0.60 mm thick prepainted steel sheet (Tata Make) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mocrons over 5 microns primer coating including fixing with self driven steel screws / prepainted iron J or L hooks or seam bolts with prepainted limpet and rubber washers complete with all accesoriees as required as per the detailed drawings including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

INDER JEET

SUNIL SHARMA