Extension, Renovation and Modernization (ERM) of BLTEC, Rayagada in Gajapati District

Supplying all labour, t&p for earth work in excavation of all kinds of soil within 50m intial lead and 1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge.

Filling foundation and plinth with sand well watered and rammed including cost,conveyance and royality of sand etc. complete as per direction of Engg-in-Charge .

Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 4cm size c.b.h g metal including hoisting, laying and curing with lead of all materials to site.

Cement Concrete (1:2:4) with 12 mm size broken hard granite chips for R.C.C. works including hoisting and laying etc. complete as per direction of Engg-in-Charge .

R.C.C. work M-20 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing including centering and shuttering etc. complete as per direction of Engg-in-Charge .

(a) Column base

(b) Plinth beam

( c) Roof beam

(d) Roof Slab

(e )Super structure

Supplying,fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel and binding wire etc.complete as per direction of Engg-in-Charge .

Brick work with Fly Ash Bricks having crushing strength 75 kg/sq.cm in c.m. 1:6 in F & P including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

Brick work with Fly Ash .Bricks having crushing strength between 100kg/sq.cm to 149kg/sq.cm in c.m. 1:6 in Sup.Str. including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

6mm. thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost , conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge

Ground Floor

First Floor

12mm. thick cement plaster in c.m. 1:6 over brick masonry including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

Ground Floor

First Floor

Supplying all materials, labour, T&P, and providing 16mm thick cement plaster (1:6) over brick work including punning with lead of all materials to site in First Floor.

Scraping old Paints with scrapers,sand papering and washing with soap water or Soda including scaffolding Charges up to 5m

Ground Floor

First Floor

Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete as per direction of Engg-in-Charge .

Ground Floor

First Floor

Wall Priming one coats on new work with wall water bound primer of approved shade as per direction of Engg-in-Charge .

Ground Floor

First Floor

Wall painting two coats on new work with Plastic emulsion paint of approved shade as per direction of Engg-in-Charge .

Ground Floor

First Floor

Wall painting two coats on new work with Weather coat paint of approved shade as per direction of Engg-in-Charge .

Ground Floor

First Floor

Iron work wrought and put up in trusses and record racks

Supply fitting and fixing of 0.450mm thick of size 1072mm x 3050mm "DURASHINE" Corogatted Sheet in in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting as per direction of Engineer-incharge.

Providing, fitting,fixing up Partition Walling aluminum anodised section No- 9210and9207 as single groove and double groove respectively as horizontal and vertical member and section 4660 as tapered clip and jointing angle No.1855 etc as per direction of Engineer-in-charge including fixing 12 mm thick prelaminated novapen board etc. complete as per direction of Engg-in-Charge . .

Fixing Granite tiles of 0.1 to 0.4 Sqm(10mm thick) in dados skirting an riser of steps on 12mm thick cement plaster(1;3) joineted with neat cement slurry

Supply fitting Brass Letter for Gate etc Complete as per EIC

Supply Fitting and fixing standard steel glazed doors windows and ventilators in wall of approved make or metal beading with screw

Supply fitting and fixing of MS pipe/ square bar for Cow Catcher etc. complete as per direction of Engg-in-Charge .

PH & Sanitary Works

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge.

25 mm dia PVC Pipe

Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge.

Cutting holes through existing brick work for taking CPVC pipe s and making good the damageswith cement morter (1:6) as per specification and direction of the Engineer -in-charge.

15 mm dia CP BrassShort Body Bib cock .

15 mm dia CP Brass long bodyBib cock .

Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX)conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a height of extra 5 Meters above ground level and placing the tank to the required position etc, all as per speci fication and directionof the Engineer incharge.

Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer incharge

Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirroor with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

Supplying all materils,labour, T&P fitting,fixing of Cp soap standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

Supplying all materils,labour, T&P fitting,fixing of CP brass towel ring wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

Supplying all materils,labour, T&P fitting,fixing of CP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

Please Enable Macros to View BoQ information