NIT NO. 29 ITEM NO. 16

Disconnection of electric motor P/set, remove from the base frame, remove charging line of vacuum pump set etc. by dismantling of old damaged pump-sets from base frame by cutting of foundation bolts with the help of gas cutter and taking out with the help of heavy labour.

S/o mono block P/set having discharge 18 - 11LPSon 18 – 29 mtr head required and syn. Speed 2900 RPM with CI impeller, size: 80 X 65 mm, TEFC motor, “F” class insulation in standard construction. Make:- Kirloskar/M&P/Approved by DJB

Modification of existing base frame suitable for above pump set by the help of welding work & material as required after that making of cement concrete foundation suitable for above P/set with all material like cement concrete sand, i/c supply and grouting of foundation bolt etc as required.

S/o MS Pipe 80 MM dia ‘B’ Class Make:- Jindal/TATA/ Approved By DJB

Making & Supply of MS flange 2.5-inch dia

Making & Supply of MS flange 3-inch dia

S/o Nut bolts with washers of good quality.

S/o 50% neoprene packing sheet for jointing Make: - Jyoti/Deep/National/ Approved By DJB.

S/o 6 sq mm three core copper cable working voltage upto 1100V. Make: - Polycab/ Kalinga/ Havells/ Grandlay Approved by DJB

Renovation of Electrical Supply system by providing/ fixing of 2 Nos. oil immersed Star Delta Starters of suitable rating, four pole change over switch 63 Amp in SS enclosure (1 No.), Main switch 63 Amp (1 No.), Main switch 32 Amp (2 Nos.) volt meter -02 Nos., ampere meter- 2 Nos., LED indicating lights- 03 nos., including all suitable accessories and wiring and interconnections with copper cables as per site requirement in the panel. Make of Material: - Changeover / Main Switch : L & T/ Schneider / Havells/ HPL/Standard/ Bentax Meters.:- L&T / AE / Schneider/ Trinity / Sigma Indicating Light: - L&T/ BCH / Vaishno / Schneider Oil Immersed Starters: Advance / BCH / Bentax / capital

Replacement of Gun metal gate valve & union, tee, socket etc of size ½” & 1” as per site requirement & other accessories as required for charging system.

Cleaning the surface of pipes and other specials, valves etc with wire brush and emery paper and painting the complete installation with two or more coats of synthetic enamel paint and coat of steel primer

Installation of motor P/sets i/c above E&M equipment along with all piping work & making & supply of Bend, Tee, elbow, socket, reducer & other specials etc as required & fixing of valves and executing allied E&M and civil work including making support for valves, laying of cable as per site requirement, making connection with thimble panel board i/c cartage, taking all safety precaution, arranging all tools and tackles i/c welding set gas cutter etc, the work is inclusive of testing commissioning of all E&M equipment at No load and full load condition.

Testing & commissioning of motor P/sets i/c above all E&M equipments first at on No-load and then on On-load condition

Transportation charges for man & Material including loading / Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

WINGO BUILDTECH INDIA

paramount systems

M/s Vipin Enterprises