Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹16.1 L+₹1.3 L (8.60%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹14.8 L
EMD Value
₹14,850
Closing Date
12 Jan 2024, 3:00 pmClosed
Commissioner Madurai Corporation
Aringar anna maligai
Construction of Community hall building at Vadakku Vasal in ward 61
2023_MAWS_404717_1
E7 / Est.No. 214 MLA(C) / 23-24
Open Tender
Civil Works
Lump-sum
60 days
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹14,850
2 Feb 2024
30 Dec 2023
12 Jan 2024
30 Dec 2023
12 Jan 2024
30 Dec 2023
Amount
Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Complete
Supplying and filling in foundation and basement with M-Sand in layers of 15cum thick well rammed and consolidated including watering complying with std. specification etc.
Cement concrete 1:4:8 (one cement four sand and eight aggregates) Using 40mm gauge hard broken granite jelly for foundation inc. consolidation and dewatering for foundation wherever necessary etc.complete.
Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete For Foundation and Basement.
Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete complying with standard specification For Super Structure in GF.
Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete complying with standard specification For Super Structure in FF.
Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar,RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Vertical Portion Only) using steel plates10m2.
Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides)
Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar,RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Vertical Portion Only) using steel plates10m2.
Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in G.F.
Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also). Below 16mm Dia
Plastering with CM1:5(one cement and five sand) 12mm thick10m2.
Plastering with CM1:3(one cement and five sand) 20mm thick10m2.
Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work MDU-CORP-BUILDING DATA-P-37-SL No:62
Fabrication supply and fixing of fully paneled double leaf steel door made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc…
Fabrication supply and fixing of Fully paneled double leaf steel window made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc
Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m
Painting Two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Labour Charges for over head wiring from EB pole to pumproom by fixing32mm dia GI pipe to the required height over roof slab of pumproom and as directed by EB authorities including fixing M.S clamp set U.Kondi,7/20GI wire 7/20PVC insulated copperwire reels T.W meter board aerial board earthplate GI Bolt of nuts PVC Hose fuse wiring etc complete
Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) SD - 20
Labour Charges for over head wiring from EB pole to pumproom by fixing32mm dia GI pipe to the required height over roof slab of pumproom and as directed by EB authorities including fixing M.S clamp set U.Kondi,7/20GI wire 7/20PVC insulated copperwire reels T.W meter board aerial board earthplate GI Bolt of nuts PVC Hose fuse wiring etc complete
Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with out regulator with complete set
Supply and fixing of single box type 18Watts 4'Feet LED flu Fitting complete with wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting. TWAD-DATA-P- 173 -SL No:
Supply and fixing of 30W LED Street Light Fitting with LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE).
Supply of delivery and fixing of G.I Pipes and specials as per IS specifications 110mm PVC pipe
32mm PVC pipe
32mm G.I Pipe
25mm PVC.Pipe
110mm PVC Coupler
110mm PVC Elbow
32mm PVC Coupler
32mm PVC Elbow
32mm PVC tee
32mmX25mm Reducer
25mm PVC.Coupler
25mm PVC Elbow
25mmX20mm Tee
1/2"CP Tap
Providing water clost 580mm size Orissa type Indian make with(P)trap including fixing a pair of foot rests over a bed of brick jelly concrete in L.M 1:2 using 40mm broken brick jelly 100mm thick and top plastered with C.M 1:3 (one cement and three sand) 20mm thick etc.complete.MDU-CORP-BUILD-DATA-P-64 SI-108
Supplying and fixing in position best quality approved make white glazed earthwares wash hnd basin of size 550X400mm with a pair of cost ironbrackets,including cost of 15mm diametre C.P.Waste union 32mm diametre P.V.C waste pipe with rubber plug and chain 15mm duametreG.M wheel value 15mm dia brass nipple,15mm dia nylon connections etc including fixing the wash hand basin in the ewall in position with a pair ofC.I brackets with teak wood plugs and screws and giving necessary water supply connectionsand painting the brackets with two coatsof paint over a priming coats of paint over a priming coat of anticorrosive paint including testing for Leackage etc., complete complying with standard specifications (D) MDU Build Data 2021-22 Pg-62
Supply delivery & fixing of HDPF tank of 2000 lit Capacity as per ISI 2701/1996
Providing Rain water harvesting arrangemens in corporation building by inserting of 150mm PVC slotted casing pip,including earthwork excavation for 900mm precost cement Rings are 40mm metal and two coat fourth Rings are sand providings necessary pipe line arrangements eith std specifications etc,complete MDU-CORP-Data-PAGE No:92-SL-148
Constructions of inspections chamber of following size with earth work excavation for foundtion with dust Filling 10mm thick and Plain cement concrete bed in C.M 1:5:10 using 40mm HBG jelly 10mm thick for foundation 23cm thick brick wall work in C.M 1:5 for chamber Inner and outer Plastering with C.M1:3 12mm thick Benching channelling 75mm thick RCC loose slab conerting in C.M 1:2:4 mix using 20mm blue granite jelly includingnecessary reinforcement etc., complete Size for 75mmX75mmX75mm
Add GST 18%
KARUPPAIAH P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .