Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.5 LAccepted-AOC 53 HOUSING BOARD COLONY PHASE II UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | J K | 182101 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹30.6 L+₹7.0 L (29.9%)Rejected-Finance NEAR MES FILTER PLANT SANGOOR UDHAMPUR J K 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹33.5 L+₹10.0 L (42.3%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹33.9 L+₹10.4 L (44.1%)Rejected-Finance 6 RAILWAY STATION ROAD ONKAR INDUSTRIES GULAMALI PURA BAHRAICH UTTAR PRADESH 271801 | BAHRAICH | UTTAR PRADESH | 271801 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹34.2 L+₹10.7 L (45.3%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹34.6 L
EMD Value
₹69,300
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh A K Dubey IDSE SE CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
ADDN/ALTN TO HT SYSTEM AT NCSR COMPLEX UNDER GE (UTILITIES) UDHAMPUR
2022_MES_541043_1
CWE/U(U)-53/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
UDHAMPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹69,300
23 Sept 2022
26 Jul 2022
22 Aug 2022
26 Jul 2022
20 Aug 2022
8 Aug 2022
Amount
Supply and ererction in vertical position Steel tublar swaged poles erected truly vertical or planted as strut complete with 6 mm thick cast iron base plate, welded to pole, B-118 finial taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-55 (11 m long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfacs of pole with two coats of aluminium paint over a coat of two coats of zinc chrome primer and two coats of black bitumenous paint internally & portion embedded in concrete, making five black & white bands at lower portion of pole each 300 mm wide alternatley, and marking pole No. with black paint at suitable height including dismantling of existing pole & making good complete all as specified and directed. Note :- Excavation and earth work, PCC in foundation shall be measured and paid for separetely.
Supply and Fix cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint , complete all as specified and as directed by Engr-in-Charge.
S&F insulator pin/Disc/shackle type porcelain viterous white, brown or green HT 11000 Volts including 01 galvanized M.S. spindle, two galvanised iron washers and one galvanised iron nut of 150mm height and 150 mm dia , all as specified and directed by Engr-in-Charge.
Supply & fixing Aluminum conductor steel reinforced (ACSR) of any size on steel poles as overhead conductor as required including binding properly on insulator, jumpering , complete all as specified and directed by Engr-in-Charge.
M & L for providing earthing with GI earth plate electrode 600 X 600 X 6.3mm buried directly in ground (earth pit not less than 2.25M deep below ground level ) with top edge of the earth plate not less than 1.5M below ground level connected to GI strip 32 x 6mm thick for earthing lead fixed by means of nuts,bolt,washers etc connected to earth test point complete all as specified in electrical plate NO 3 of SSR 2009 Part I ,including necessary excavation and earth work in any strata of soil,comman salt, charcoal dust, 40 mm dia light grade GI pipe for protection to earth lead, GI water pipe 20mm dia with funnel &wire mesh , PCC pit with CI cover and frame etc all as specified and directed by Engineer-in-charge. Note:- (a) On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge. (b) All the joints shall be made with welding to get proper conductivity.
M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size120-185 sqmm complete, all as specified and directed by Engr-in-Charge.
Supply , install, testing and commissioning of 11KV SF-6 switchgear,630 Amps, 21KA/3 sec, outdoor duty internal are IAC AFL 21 KA for 1 sec for Gas tank, SF6 gas insulated , one side extensible 4 way, manual operated ring ment unit. Operated in combination of 1 No load break switchg as incommer and 3 Nos load break switch as out goings consisting of copper busbar in SF6 insulated 304(Non-ferrite Non Magnetic grade) complete all as specified & directed by Engineer-in-charge . Stainless steel enclosure of thickness 2.5 mm with manometer fixed. Switchgear shall confirming to IEC-62271-100, IEC-62271-200-2003& IEC 60694-1996. The RMU shall be along the cable chamber to put to an outdoor enclosure to have ingress protection of minimum IP 54. Should have voltage presence indicator and each LBS feeder should have fault passage indicator. Switchgear shall accomodated with syntheic rubber mats 2m x 1 m x 0.5mtrs -01 no each. Note: Old u/s SF6 shall be deposited in AGE E/M E/S store yard with proper ledger charge with JE.
Note for BOQ item No 7 : quoted rate shall deem include following (a) Construction of plinth for Circuit breaker 1 mtr height x 2.5mtr width x 2.5 mtr length including necessary duct for cable and required size of chequred plates and morum filling, PCC at top 10cm thick ( 1:2:4 ) and PCC foundation with 1:4:8 ( 80cm width x 2.7 mtr length in square foundation 25cm height all as per drawing provided by the department including plastering to exposed walls and white wash. Providing MS Channel on top of size 75x40x8 mm of 1.5 mtr in length for rolling to Breaker including chain link fencing of wire mesh 150x 100 size made out of Gl Wire of height 1.5 mtr fixed with the help of MS flat 25x6 mm and including MS angle 75x45x6mm thick Nos post by means of drilling holes at the distance of 30cm and fixed with the help of suitable nut , bolt and washer . The length of the MS angle iron not less than 2.25mtr, top of the pad to the shape of 60degree including 3 Nos for inserting barbed wire including 03 runs of barbed wire and including provision of gate of size 1.5mx 0.9mtr made out of MS angle iron 50x 50x6 mm and MS bar 12 mm dia for meshing the gate and locking arrangements including PCC foundation 1:2:4 type B-1 for posts, 2 coats painting to steel members, complete all as specified and directed b ) Pre - commissioning test of Circuit breaker shall be carried out by rep of accepting officer. Transportation tro / fro charges required for inspection officer shall be borned by the contractor.
Supply lay test and commissiong for XLPE insulated, armoured, aluminium conductor cable, 11000 volts grade, heavy duty, cross sectional area 240sq mm, 3 core, laid in trenches/ducts/through pipe complete, all as specified and directed by Engr-in-Charge.
Supply lay test and commissiong for XLPE insulated, armoured, aluminium conductor cable, 11000 volts grade, heavy duty, cross sectional area 120sq mm, 3 core, laid in trenches/ducts/through pipe complete, all as specified and directed by Engr-in-Charge.
Supply lay test and commissiong for XLPE insulated, armoured, aluminium conductor cable, 11000 volts grade, heavy duty, cross sectional area 95sq mm ,3 core, laid in trenches/ducts/through pipe complete, all as specified and directed by Engr-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth in hard/dense and getting out soil, complete all as specified and as directed by Engr-in-Charge.
Description all as per srl item No 12 above but for each additional 1.5 m or part thereof in depth beyond the first 1.5 m, complete all as specified .
Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil, complete all as specified and as directed by Engr-in-Charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.
Supply and lay DWC (Double wall corruguated) pipe 90x76 mm conforming to IS: 14930/ IS 16205 for protection of HT Cable 120sq.mm & 95sq.mm, ISI Marked, including necessary snap-fit coupler required for fixing complete all as specified & directed by Engineer-in-charge
S&F double walled corrugated (DWC) pipe of size 120x103 mm including snap fit coupler conforming to IS:14930 (Pt-II)/IS-16205 Pt-II for protection of HT cable 240 sq.mm in under ground complete all as specified & directed by Engineer-in-charge.
Material and labour for road cutting for laying of HT/LT Cables / Pipes and making good the disturbed surfaces as equal to existing road finishes including refilling the excavated material, compacting , WBM and black top carpeting with bitumen & aggregates complete all as specified & directed by Engineer-in-charge
Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete, all as specified and directed by Engr-in-Charge.
Plain cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) for coping of poles complete including necessary form work, all as specified and directed by Engr-in-Charge.
FANGALIA TRADERS
proach associates
MOHAN LAL AND SONS
M/S Builders Indias
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .