PROVISION OF STORE ROOM FOR SINGLE LIVING PERSONAL OF BIRBAL I AND BIRBAL II AND ADDITIONAL ALTERATIONS AND AREA DEVELOPMENT TO DHOBI GHAT AT INHS ASVINI AND ADDITIONAL ALTERATIONS TO NURSING CADET MESS FOR PROVISION OF ALTERNATE FIRE ESCAPE LADDER A

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Material & Labour PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 80mm nominal bore, medium grade, mild steel tubes for structural purposes as in columns, main or cross beams, hip & jack rafters; purlins where connected to common rafters; fixed with angle cleats or other connecting plates, conforming to IS:1161-1979, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing mild steel Roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.of Gde Fe 410. Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Rolled mild steel sections as in main & cross or tie beams, posts, hip & jack rafters; purlins where connected to common rafters; fixed with angle cleats or other connecting plates Gde Fe410. Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing mild steel 10mm plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment also fixing with fabrication/ welding etc.of Gde Fe410. Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing pre-painted galvalume aluminium zinc coating GI based corrugated/ plain steel sheet 0.80mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge work/ cladding to wall, fixed with self taping screws Complete all as specified and directed by Engineer-in-Charge.

Material & Labour surface dressing n exc 15 cm deep on hard/ dense soil complete all as specified and directed by Engineer-in-Charge.

Material & Labour treating pre- construction ATT for the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed by Engineer-in-Charge.

Material & Labour treating pre- construction ATT for the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured). Complete all as specified and directed by Engineer-in-Charge.

Material & Labour treating pre- construction ATT for the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed by Engineer-in-Charge.

Material & Labour treating pre- construction ATT for the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed by Engineer-in-Charge.

Material & Labour treating pre- construction ATT for the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall. Complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.50m wide and n.exc 1.50 m in depth for foundation in hard/dense soil Complete all as specified and directed by Engineer-in-Charge.

Material & Labour broken stone or boulder hardcore of gauge exc 63 mm but n exc. 75 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface. Complete all as specified and directed by Engineer-in-Charge.

Material & Labour RCC (1:2:4) (nominal mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete using 20mm graded stone aggregateComplete all as specified and directed by Engineer-in-Charge.

Material & Labour RCC (1:2:4) (nominal mix) in columns, pillars, piers, posts and struts using 20mm graded stone aggregate Complete all as specified and directed by Engineer-in-Charge.

Material & Labour RCC (1:2:4) (nominal mix) in beams, cantilevers, bressummers, lintels etc. using 20mm graded stone aggregate Complete all as specified and directed by Engineer-in-Charge.

Material & Labour RCC (1:2:4) (nominal mix) mixing with 5% WPC of the cement quantity, in slabs supported on walls, beams and columns in roofs, landings, balconies, canopies, deck slabs and in shelves etc. complete all as specified and directed. Note :- 1. WPC shall be measured seperately. 2. Slope shall be provided as per the direction of Engr-in-Charge.

Material & Labour RCC (1:2:4) (nominal mix) in chajjas etc. using 20mm graded stone aggregate Complete all as specified and directed by Engineer-in-Charge.

Material & Labour formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter, finished fair surfaces of concrete flat. Complete all as specified and directed by Engineer-in-Charge.

Material & Labour formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. in square, rectangular or polygonal shape, finished fair surfaces of concrete flat. Complete all as specified and directed by Engineer-in-Charge.

Material & Labour formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, finished fair surfaces of concrete flat. Complete all as specified and directed by Engineer-in-Charge.

Material & Labour formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings etc. not exc. 200m thick (Horizontal or sloping) finished fair surfaces of concrete flat. Complete all as specified and directed by Engineer-in-Charge.

Material & Labour formwork to edges of concrete flat, window cills, chajjas, openings in concrete walls, floor and roofs n. exc 200mm wide, finished fair surfaces of concrete flat. Complete all as specified and directed by Engineer-in-Charge.

Material & Labour formwork to chajjas and similar items including edges, finished fair surfaces of concrete flat, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for mild steel TMT bar 10mm dia and over,cut to length,bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than .9mm dia or securing with clips, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality, Complete all as specified and directed by Engineer-in-Charge.

Note:- Item Nos from 17 to 28 shall be deemed to be included erection of steel props about 14' height @ 70cm c/c both ways, supporting with a continious 2" x 3" wooden runner, resting on wedge and block minimum capacity 1 ton, to support the structure provisionally in position till required as directed including necessary scaffolding and safety arrangements etc.

Returning, filling in, hard/dense soil including spreading, levelling, watering and well ramming in layers n. exc 25cm thick in each layer Complete all as specified and directed by Engineer-in-Charge.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 40 mm thick DPC in cement concrete 1:2:4, type B-0 to horizontal surfaces mixing with WPC @ 3% of cement quantity, including necessary formwork Complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material & Labour moorum filling under floor including raising (or lowering) the floor level , spreading in layers n exc 30 cm thick ; watering, rolling and finishing to required size, shape, etc. n exc 1.5 m high from base Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 100 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as subbase floors, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in subbase and plinth protection etc; finished even and fair without using extra cement Complete all as specified and directed by Engineer-in-Charge.

Material & Labour Machine Pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 50-60 mm thickness M-35 grade Complete all as specified and directed by Engineer-in-Charge.

Material & Labour PCC in roof kerbs of mud stops, rounded or chamfered on edges type C1 (1:3:6) using 20 mm graded aggregate complete all as specified and directed by Engineer-in-Charge.

Material & Labour Sand filling or cushioning under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Material & Labour Machine cut Kota stone slab 40-50mm thick (tabble rubbed and polished) as shelves etc. laid over cement screed base including rubbing and grinding the sharp edges complete all as specified and directed by Engineer-in-Charge.

Material & Labour Marble work (Baroda Green) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade other than white and black over 15 mm thick Screed in CM (1:4), Complete all as specified and directed by Engineer-in-Charge.

Material & Labour Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 20mm thick screed bed in CM(1:6), Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Coloured Glazed ceramic tiles in vertical surface 300x450x7mm thick set & jointed in neat cement slurry & pointed in white or coloured cement to match over and incl 15mm thick plaster in CM(1:4) complete with water proofing compound, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick on brick/concrete surfaces in CM 1.4 on walls finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick on block masonary surface in CM 1.6 finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 10 mm thick to the fair/unfair finished surface of concrete ceiling surfaces in cm 1:3 including taking down cement plaster of any description, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour preparation of new undecorated surfaces of walls, soffitSupply & Fixing acias of beam, chajjas etc and applying two coat of weather proof Acrylic based paint (100% acrylic) exterior grade over a coat of primer including all necessary arragements like scafolding, ladder etc complete all as per manufacturers instructions Complete all as specified and directed by Engineer-in-Charge.

Material & Labour applying one coat of primer, and two coats of oil bound distemper on plastered surfaces of walls Complete all as specified and directed by Engineer-in-Charge.

Material & Labour applying one coat of primer, and three coats of white wash on plastered surfaces of ceiling Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging or sliding with & including either hooks & hinges, holdfasts or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing, welding or fabrication etc. complete Gde Fe410 Complete all as specified and directed by Engineer-in-Charge. (i) Item shall be paid as per the weight of steel section however the rate quoted shall be inclusive of the cost of holdfasts, joining cleats, fasteners, screws and all other fittings like locking arrangement, handles, hinges including welding or fabrication etc which shall not be measured for arriving the weight.

Supply & Fixing Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing mild steel framed work such as grills, gratings and framed guard bars etc., with ends of bars shouldered and/or riveted, or forged into spikes and similar work of GDE Fe410 Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple,safty lock etc. and one shop coat of primer; erected in position as in-dicated, complete: push pull or manual type 1.00 mm thick laths with ball bearing also including one coat of aluminium paint on both sides of the shutters Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing powder coated aluminium sections of various sizes required of sliding or fixed type for frame and shutters of doors, windows, ventilators and partition with one or more rebates etc.including necessary joining cleats, glazing clips, beading, rubber packing, screws and all other fittings like locking arrangement for shutters, handles, tower bolts hinges etc. Complete all as specified and directed by Engineer-in-Charge. Notes :- Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight.

Material & Labour for 5.80 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads, in square in exe 0.50 Sqm in each pane, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for installation ceiling mounted, pulley operated clothes drying system, 8"(feet) Pulley System Kits (make:- M/s Easy Dry Systems Pvt Ltd), complete all as per manufacturer instructions Complete all as specified and directed by Engineer-in-Charge. Note:- (i) The rate of item shall be deemed to be included complete accessories of 8"(feet) Pulley System Kits of M/s Easy Dry Systems Pvt Ltd or as approved by GE

Supply & Fixing 2000 Ltrs Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed as directed position including 40mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule as specified in SSR Part I

Supply & Fixing GI tube, 15mm bore, 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors all as directed of following size of make Zenith

All as per item Ser No- 58.00, but 20mm bore

All as per item Ser No-58.00, but 25mm bore

All as per item Ser No-58.00, but 40mm bore

Supply & Fixing in repairs bib tap chromium plated brass 15mm with crutch or butter fly handle, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing repairs stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 15 mm bore angle cock, cast copper alloy, fancy type chromium plated screwed down, high pressure Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Cement concrete in surface channels and drains using Type C2 in CM 1:3:6 (40mm graded aggregate) complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in cover slabs for manholes, etc and similar articles with plain fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:4) with joints to match. Note:- (i) Precast cement concrete cover shall be reinforced. Reinforcement shall be measured and paid separately.

Material & Labour for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour of point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Block colour), 1100 volts grade cable, FRLS, passing through PVC casing caping 25/32mm including accessories and Supply & Fixing PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:-

One light point controlled by one way switch.

One fan point controlled by one way switch

One 3 pin socket outlet, 5 Amps on the same board with other switches.

All as per item No 69.00 above but with 4.0 sqmm cable for one 3 pin socket outlet 15 Amps on the independent board.

Supply & Fixing of ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size Complete all as specified and directed by Engineer-in-Charge.

Material & Labour of modular switch, 1 way 6 Amp, 1 module Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing of modular socket 6Amp, 2/3 pin, combined 2 module Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing of modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

Material & Labour of modular switch, 1 way 16 Amp, 1 module Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MCB Single Pole Neutral sheet metal enclosure, double door DB 8 Way, 200 Amps rated bus bar for each phase, 240 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfacesComplete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MCB Triple Pole Neutral sheet metal enclosure, double door DB 4 Way (4+12) with 200 Amps rated bus bar for each phase, 415 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces Complete all as specified and directed by Engineer-in-Charge.

Material & Labour of sub main wiring in surface/ recessed as site required with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 6.0 sqmm and incl drawn through PVC casing capping 25x12mm/32x12mm including accesssories (ISI marks) one run of 6.0 sqmm copper wire for earth continuity wire and connected of common earth dolly, taking down old submain wiring complete and making good the disturbed surfacesComplete all as specified and directed by Engineer-in-Charge. Note:- One run of PVC casing capping 25x12mm/32x12mm, two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit.

Supply & Fixing 415 Volts, 10 KA, "C" curve minature circuit breaker (MCB) of TPN 40 to100 Amp current carring capacity in the DB complete with the connection testing and commisioning, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing of 240 Volts, 10 KA, "C" curve minature circuit breaker (MCB) of SPN 40 to 63 Amp current carring capacity in the MCB DB complete with the connection testing and commisioning, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing of 240 Volts, 10 KA, "C" curve minature circuit breaker (MCB) of SP upto 32 Amp current carring capacity in the MCB DB complete with the connection testing and commisioning, Complete all as specified and directed by Engineer-in-Charge.

Supply and fix of LED lights fitting 1x 20W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories , 230 volts, 50 Hz,1200mm sweep (48"), minimum air delivery 210 CFM with service value 6.0 BEE Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable for suitable size Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement of street light bracket bend to shape made as required of 40mm dia, 1 mtr long GI pipe light grade fixed to pole/ Wall with flat iron clamp of size 40x6mm two numbers with the help of nuts and bolts for fixing of street light fitting including making all electric connection including taking out old one Complete all as specified and directed by Engineer-in-Charge.

Supply & Fix LED street light of 40 watts rating enclosed in high grade aluminium pressure die-cast housing with heat resistant toughened flat glass suitably gasketed all including high power LEDs with secondary lens optics, Ingress protection IP- 65/66, operating voltage range120 V - 270 V, 50 HZ, AC heat management compliance easily adjustable for different mounting pipes, separate electronic driver cabin fully compliance to IS- 10322, complete fitting connecting upto street light feeder/junction box/ceiling rose & including two runs of 2.5 Sqmm PVC insulated, weather proof, multistranded Aluminium conductor cable of 1100 Volts grade including testing Complete all as specified and directed by Engineer-in-Charge.

36. Supply & Fixing MCCB, 4 Pole, 125 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, Adjustable thermal-Magnetic fixed type and making connections, Complete all as specified and directed by Engineer-in-Charge.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 50 sq mm x 3.5 core laid in ducts, passing through pipes, fixed on walls complete including connecting properly by means of clamps, thimbles for suitable size Complete all as specified and directed by Engineer-in-Charge.

Removing excavated material from the site of work to outside MD land Complete all as specified and directed by Engineer-in-Charge.

Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and Complete all as specified and directed by Engineer-in-Charge. Note :- Only compacted thickness of sand will be measured and paid separately.

Supply, laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm, Complete all as specified and directed by Engineer-in-Charge.

Cutting existing road surfaces or hard standing 0.45 mtr depth (22 thick comprising bituminuous topping) for laying of pipes/cables and making good disturbed surfaces to match with existing surfaces, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for replacement 50mm High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface after taking out old one Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for earthing complete with Galvanised steel earth plate eletrode 60cmx60cmx6mm thick buried directly in ground vertically to (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meters below normal ground level, connecting to the Galvanised Iron Strip of size 25x4mm size, by means of Bolts, Nuts, Check Nuts and washer made of GI or Steel Earth connecting with test point, provision of Charcal and salt in alternate layers, watering pipe 20mm dia medium grade MS funnel with jali, PCC M-15 Type B-1 in pit with XPM not elss than 4Kg per Sqm and Earthpit with cover returning, filling, removing excavated material all as specified complete and testing on completion Complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar/lime mortar and removing rubbish off MD premises Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing mild steel (Fe-410, Gde E-250, quality-A), framed structures, heavy bracket framing (Beam, tee, angle, channel, flat sections or square bars ), including stringers, treads, landings, baslusers, handrails etc., framing, fixing, fastenings, fabricating of angle cleats, fish plates, gusset plates, cutting, notching, bolting etc. as in stairs cComplete all as specified and directed by Engineer-in-Charge. Note:- 1. The height of the stair will be provided to G+ 7 building (up to 30mtr height from the ground). 2. Contractor shall visit the site before quoting the item and the rate shall be deemed to be included up to the height as Note 1 above.

Supply & Fixing 8 to 10mm MS Plate (plain or chequered), caps, bases, splices, angle brackets, cleats & other connections complete all as specified and directed

Material & Labour for painting to steel surfaces of any description over 10cm width or girth with 2 coats of synthetic enamel paint over a coat of red oxide over new surface Complete all as specified and directed by Engineer-in-Charge.

Taking down shutters incl frames (without taking off shutters from the frames) are not exc. 1.50sqm each Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 4.80 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads, in square in exe 0.50 Sqm in each pane, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:4), Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40mm complete fixed with aluminium wire staples and beads etc Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing aluminium anodised DECO grill 10mm thk, DG-104 fixed with necessery U/F/H channel, including cutting for handles tower bolts etc and providing U clip conceal the rough edges etc Complete all as specified and directed by Engineer-in-Charge.

Shetty Construction Co

SHREE JAGDISH FURNITURE CO.

Vandan Enterprises