Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.6 Laccepted-aoc | ₹2.6 L | accepted-aoc |
Tender Value
₹2.8 L
EMD Value
₹7,000
Closing Date
6 Apr 2026, 9:30 pmClosed
Directorate of Municipal Administration
Huncasimarad
Construction of Toilet In Lidkar Badawane At Gadag Betageri Limits.
DMA/2025-26/OF/WORK_INDENT56731
DMA/2025-26/OF/WORK_INDENT56731
Open
Optic fiber cables
Two Tender Document System(Two Cover)
DMA City Municipal Council Gadaga
₹500
₹7,000
6 Apr 2026
26 Mar 2026
7 Apr 2026
3 Apr 2026
Construction of Toilet In Lidkar Badawane At Gadag Betageri Limits.
Earth work excavation by manual means for drains,canals, waste weir, mdraft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and t...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
As per recommendation of technical Working comitee PWD SR 2023-24 rates for Formwork shall be added on 50% basis Finishing rate of Concrete For Concrete band Plinth Beams of Buildings ( Plinth Percent...
As per recommendation of technical Working comitee PWD SR 2023-24 rates for Formwork shall be added on 60% basis Finishing rate of Concrete For Concrete band Plinth Beams of Buildings ( Plinth Percent...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing double glazed hermetically sealed glazing in alu- minium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including provi...
Providing Honne wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. SR 2023-24 Item No 12.2 V-2
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
56731.docx
Tender Document • 0.94 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .