Renewal of BT surface road at Sevangan chettiar 2nd street pudur vandipathai sevugan chettiyar colony road in ward 15

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal stone aggregate to Wet Mix Macadam (WMM) specification including premix the materials with water at OMC in machanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications.

Providing and laying Prime coat of 7.00kgs/10 sqm over the WMM surface treated with primer using 7.00kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev V Specifications

Providing and laying tack coat of 2.50kgs/10 sqm over the prime surface treated with binter using 2.50 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Dense Bituminous Macadam 50mm Thick Using CMP Providing and Laying 50mm Consolidated thick Dense Bituminous Macadam Using 0.24 cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20 Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver finisher / 9m paver finisher , Vibratory / Pneumatic rollers and other tools and plant required including fuel and all other incidental charges etc.,complete as per specification using CMP as per clause 505 MORTH Rev – 5 (Mdu Corporation Data 2020-2021 Pg.No.24)

Providing and laying Bituminous concretete 30mm/40mm thick using 0.13 cum of 19.00-9.50mm grade dmetaland 0.17cum of 9.50-2.36mm grade dmetaland 0.26 cum of 2.36mm & below metal with 45.27kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50 . 30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and agregates to require dtemperature and mixing the min required temperature in central hot mix plant 20-30 tonnes capacity conveying themix by tipper trucks top a versite, spreading the mixin required temperature for uniform thickness of 40mm /30mm with mechanical paver to the specified grades and crosssections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen into bitumen tank and metal to fee derunit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, paver finisher, Vibratory roller sand all ot her too lsand plants required, including all ot herincidental charges etc., complete using CMP clause 507 of MORTH Rev - 5

Raising the existing circular manhole in heavy type including the removing the existing the manhole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using1:2:4 20mm jelly for raising the existing the manhole wall and using CC1:2:4 with 20mm chips for finishing the top surface of manhole etc., complete.

Road marking with hot applied thermoplastic compound with reflect rising glass beads on Bituminous surface Providing and laying of hot applied thermoplastic compound 205mm thick including reflect rising glass beads @ 250gms.per sqm. Area. thickness of 2.5mm is exclusive of surface applied glass beads as per IRC :35. The finished surface to be level uniform and free from streaks and holes etc complete.(as per MORTH Specification no803)

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cube corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminum sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm x 30cm x 45cm complete. The information message shall be made out cut out letters in blue transparent overlay film as per IRC 67-201 Guidelines, 7years pre qualification warranty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for Identification. Single Arrow Big Size 36" X 18" Name sign board

Add GST 18%

EDR CONSTRUCTIONS (BID ID -1555703)

CLASSIC ENGINEERING (BID ID -1555710)