Construction of football stadium at Spituk village

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and Laying of dry-stone soiling of any thickness in horizontal level, hand packed including cost of stone.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). Using crushed Stone:

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with A cement mortar 1:6 (1 Cement: 6 coarse sand)

Providing and laying damp-proof course 50rnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size is (A) Crushed

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and, fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Centring and shuttering including strutting propping etc and removal of form work for.- Columns, piers, abutments, pillars, posts and struts..

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Rate for thickness of shutters in 30 mm per sqm second class Kail wood

French spirit polishing with Two or more coats on new works including a coat of wood filler

15mm Cement plaster on the rough side of single or half brick wall of mix: 1:4( 1 cement : 4 coarse sand)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement:3 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws@ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)

Providing and fixing 12mm thick board 4" width panelling, placing with tounged and grooved geometrical design including french polishing all complete job.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Carriage of solling stone and Stone for RR Masonry from an avg lead upto 10 km by MT

Carraige charge of sand and bajree average lead upto 10km by mechanical transport.

JIGMET DORJEY

M/S TSEWANG STANZIN GOVT CONTRACTOR

M/S STANZIN YOULOW

M/S TSERING MUTUP

M/S JAMAL UD DIN

GHULAM HUSSAIN

M/S DORJAY NAMGIAL GOVT CONTRACTOR

M/S JIKMET NAMGAIL GOVT CONTRACTOR