SPECIAL REPAIR/REPLACEMENT AT VARIOUS GROUPS/SECTION TOILETS (ADM BLOCK 05 NOS, TATRA REPAIR GP-01 NOS GEG-01 NO, CWG-01 NO, ERG -01 NO AND SRG-03 NOS OF 510 ABW , PROVN OF NEW TOILET AT TELEPHONE EXCHANGE OF 510 ABW AND PROVN OF ELECTRIC EQUIPMENTS

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed

M&L for brick work old size with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed

M&L for brickwork old size with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed

M&L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finsihed even and smooth without using extra cement complete all as specified & directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finsihed even and smooth without using extra cement complete all as specified & directed

M&L for rendering 10mm thick in CM 1:4 on ceiling surface, surface finsihed even and smooth without using extra cement complete all as specified & directed

M&L for applying two coats cement base paint on wall including preparing new plastered surface complete all as specified & directed

M&L for preparation of new ceiling surface and applying three coat of white wash complete all as specified & directed

M&L for preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over a 1.5mm thick wall care putty complete all as specified & directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. complete all as specified & directed

M&L for non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed

M&L for glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the color of tils over and including 15mm thick backing coat to receive tiles in CM 1:6 complete all as specified & directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each.complete all as specified & directed

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. Note:- (i ) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F powder coated anodised aluminium ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick frosted glass complete all as specified and directed.

S & F in repairs 18/19mm thick Soild MDF board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to MDF frame work in cup boards, rebated or flat edged fancy handle ,hinges and Magnite lock as per ground requirement complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified & directed.

S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified & directed.

S&F Butt hinge, Stainless steel of 100 mm size complete all as specified & directed.

S&F SS chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

S&F PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed.

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified & directed.

S&F in repairs bib taps cast copper alloy 15mm size, crutch or butterfly handle, screwed down, screwe for iron pipe chromium plated complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed.

S & F CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed.

S&F in repairs SS chromium plated angle valve 15mm size complete all as specified & directed.

S&F in repairs CP brass soap dish complete all as specified & directed.

S&F in repairs Vitreous China half stall urinal flat back, white (minimum), with grating and union for discharge pipe and waste pipe, including all fittings complete all as specified & directed.

S&F in repairs vitreous china ware EWC combined pattern with cistern complete with internal fittings complete all as specified & directed.

S&F in repairs for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified & directed.

S&F in repairs rotational moulded polyethylene white colour water storage tank(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 litre capacity including suitable aluminium float valve complete all as specified & directed.

S&F in repairs Vitreous China wash basin oval bowl counter type white, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling and waste pipe complete all as specified & directed.

S&F in repairs PVC(SWR) floor trap, 75/110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.

S&F in repairs PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls complete including faixing clamps complete all as specified & directed.

S&F in repairs PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to floors and walls complete including faixing clamps complete all as specified & directed.

S&F in repairs PVC(SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore complete all as specified & directed.

S&F in repairs PVC(SWR) junction single, (Single T) equal or unequal provided with access door 75mm bore complete all as specified & directed.

S&F in repairs PVC(SWR) bends 110mm bore any radius complete all as specified & directed.

S&F in repairs PVC(SWR) bends 75mm bore any radius complete all as specified & directed.

S&F in repairs PVC connections 15mm size, 450mm long with PTMT nuts complete all as specified & directed.

S & F in repairs 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed as specified.

M&L cement concrete 1:3:6, type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm dia pipe complete all as specified & directed.

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia complete all as specified & directed.

M&L for 18 -20mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified & directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, bushes,cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M & L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 200ml by weight of cement bag finised even and smooth without using extra cement on roof surface when concreate is green and wall complete all as specified & directed. Note:- WPC will be measured and paid seperately as supply only rate).

Supply only liquid water proofing compound complete all as specified & directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric 75mm thick over lap (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified & directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for etc including removing the same where directed complete all as specified & directed.

M & L for 75 mm thick cement concrete 1:4:8 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified & directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified & directed.

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified & directed.

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

M & L for Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L for TMT bars 5mm dia & over upto and over 10mm dia in stirrups spacers & binders etc complete all as specified & directed.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified & directed.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) for columns, pillars, pierrs, posts & struts complete all as specified & directed.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc complete all as specified & directed.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc all as specified and directed.

Form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter complete all as specified & directed.

Form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified & directed.

Form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc all as specified and directed.

Form work fair finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc all as specified & all as directed

Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified & directed.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil complete all as specified & directed.

M & L for removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

M&L for broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified & directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification complete all as specified & directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification complete all as specified & directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified & directed.

S&F 3.00mm thick sheet figured glass, pin head type and glazing with oil putty in squares n exc. 0.5 sqm in each pane. complete all as specified & directed.

M & L for Preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide over 10cm width or girth. complete all as specified & directed.

S&F steel ventilator with to hung shutter incl hinges steel peg stay complete all as specified & directed.

S&F SS chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

S&F tubes, medium grade, 20mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors. complete all as specified & directed.

S&F tubes, medium grade, 25mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors. complete all as specified & directed.

S&F brass chromium plated angle valve 15mm size complete all as specified & directed.

S&F 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle. complete all as specified & directed.

S&F CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified & directed.

S&F vitreous china wash down water closet pan(pedestal patern), white including fixing bolts and connection to drain pipe or out going pipe but exclduing flushing cistern and flush pipe. complete all as specified & directed.

S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors. complete all as specified & directed.

S&F PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors. complete all as specified & directed.

S&F PVC connections 15mm size, 450mm long with PTMT nuts complete all as specified & directed.

M&L for 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed complete all as specified & directed.

M & L for concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified & directed.

M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover including placing and set in CM 1:6 complete all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately) complete all as specified & directed.

M& L for preparing plastered new surfaces of wall and applying three coats of white wash on wall surface complete all as specified & directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size dia 2.4mtr X 4.5 mtr deep etc complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floors, coping, bed block, kneels, apex stones etc including weathering slightly rounded or chamfered including form work complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:-

One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps.

One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch.

S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed.

S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed.

S & F LED lamp 9 W 6500k,240V complete all as specified and directed.

S & F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed.

S & F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

S & F Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

S&F Exhaust fan steel body AC single phase 230/240V size 300 mm sweep with blades, and louvers including hole and plastering complete all as specified and directed.

S & F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S & F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed.

S & F MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wite 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifiied or indicated including testing on completion complete all as specified and directed.

Supply and Laying and testing cable XLPE insulated screened, PVC bedded, Galvanised steel srip or wire armoured electric power cable (Heavy duty) 1100 V Grade, aluminium conductor of size 6 sqmm 2 core complete all as specified and directed.

Excavation in trenches in soft and lose soil n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of GI/CI pipe line & getting out including forming bottom surface complete all as specified & directed.

Returning filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick in any type soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for Sand cushioning for under ground cable upto 8 cm before laying the cable and 15 cm after laying and stretching the cable complete all as spd and directed. Note : Punned thickness shall be measured & paid )

M & L for sub class 'B' bricks well burnt of size laid dry flat for protection of cable complete all as specified and directed.

M & L for GI pipe in replacement ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including suitable size clamps complete of size 40mm bore, complete all as specified and directed.

S & F 25 mm dia bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe including testing complete all as specified and directed.

Cutting of existing CI pipes and reducing to required length before laying in position for insertion of new tees,branches etc complete all as specified and directed of size 150mm dia bore complete all as specified and directed. Note :- Fittings will be measured and paid of separately under respective items

S & F 25 MM dia bore GI tubing,medium grade,ISI marked complete with all fittings laid in trenches or laid under floors,fixed on walls on walls with and providing clamps etc complete all as specified & directed

Taking down copper/ aluminium point wiring (ligh, fan, socket or power etc.) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings etc. for taking credit and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified and directed.

M&L for surface/ concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable FRLS in and including PVC conduit conduit of 20 mm dia or higher, medium grade complete with and including all stove enamelled steel conduit conduit accessories / fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed for One light/fan/bell point wiring controlled by one, one way switch/bell push button.

All as described Srl item No 125 here-in-before but one out let socket point 3pin 5 amps on independent board.

All as described Srl item No 125 here-in-before but on the same board with other switches

All as described Srl item No 125 here-in-before but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board complete all as specified and directed.

S&F switch piano flush type, 5A, AC, 240V, one way complete all as specified and directed.

S&F switch piano flush type,15A, AC, 240V, one way complete all as specified and directed.

S&F socket outlet flush type, 5A, 5pin, AC, 240V complete all as specified and directed.

S&F socket outlet flush type, 15A, 6pin, AC, 240V complete all as specified and directed.

S&F in repairs integrated LED tube light fitting surface mounting, Poly carbonate batten, 4', 240V, T5, 20 Watt complete all as specified and directed.

S&F in repairs integrated LED tube light fitting surface mounting, Poly carbonate batten, 2', 240V, T5, 9/10 Watt complete all as specified and directed.

S&F in repairs 35Watt pewired LED street light luminaire incl suitable OD GI pipe bracket, two nos mounting clamps with nuts, bolts and washers complete all as specified and directed.

S&F in repairs lamp holder, PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, complete all as specified and directed..

Supply only in replacement, 12 Watts LED lamp 2 pin with B22 base, clear acrylic diffuser, power factor .90, 100 lumens per watt complete all as specified and directed.

S&F in repairs Metallic Enclosure, SPN DB, 240V, AC, 4 way, double door with 200Amps rated busbar complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 A, AC, 240V, 10KA, complete all as specified and directed.

S&F in repairs Isolator DP, 40A, AC, 240V, complete all as specified and directed.

M & L for single phase sub main wiring with 04 Sqmm nominal cross sectional area, four run of single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including 2 run 4Sqmm + 1run 4.0 Sqmm earth in 25mm conduit, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic FR PVC concealed medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including taking down submain wiring complete all as specified & directed. Note:-One meter of conduit along with 4x4 sq mm wire shall be measured as one unit length complete all as specified and directed

S&F in repairs, including clamping and fixed to wall / pole / channels, XLPE insulated, ARMOURED heavy duty screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables with stranded aluminium conductor, 1100 volts grade, 6 Sqmm 2 core complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed

S&F BLDC ceiling fans complete with blades, down rods of size upto 1 mtr ,with remote and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CMM with min service value 6_ BEE 5 stra rated, with brushless direct current motor including all connection complete all as specified and directed

S&F desert cooler electric driven (single phase) 240 volts, AC heavy duty fan motor with submersible water pump ISI marked 3 core 1.5 sqmm pvc cable of minimum 3 mtr long with plug top and control switches etc complete having nominal air flow capacity of 4000 cum per hour( or nearest size) Steel body including suitable size of iron stand of size 40 x 40 x 4 mm complete all as specified and directed.

S&F air circulator fans 230 volts single phase oscillating 450mm sweep suitable for wall mounting including all connection complete all as specified and directed.

S&F pedestal fans complete with blades, and all accessories, 230 V,single phase , 450 mm sweep complete all as specified and directed .

S&F 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC conduit of size 20 /25 mm dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and duly complete all as specified and directed for the following :-

One tube light/Bulb/Fan/Exhaust fan/ Bldg security light point controlled by one, one way switch 05 / 06 Amps.

M&L for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed.

S K CONSTRUCTION CO (BID ID -3450202)