REPAIR/ MAINT TO FLOORING, ANTI TERMITE TREATMENT, JOINERIES, PLUMBING, SANITARY FITTINGS, FENCING AND SEWAGE LINE AT OFFRS MD ACCN IN VIP AREA AND REPAIR/ MAINT TO ROOF TREATMENT , FLOORING, ANTI TERMITE TREATMENT, AND JOINERIES AT OFF

Amount

Demolition of roof treatment including PCC/ Brick Tiles, Mud phuska PCC padding, plastering, APP membrane complete treatment of any thicknesss and in any position and removing the demolished material out of MoD land complete all as specified and as directed.

M&L for 40 mm average thick PCC 1:2:4 type B0 (using 12.5 mm grd stone agg) in floors/ roof padding finishing the surface even and smooth with out using extra cement complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L, APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

M &L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; cut and polished over and including 20 mm screed bedding layer in CM 1:6 set jointed and pointed with premium cementious grout complete all as specified and directed.

M&L for P.C.C 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping or roof kerbs on roof chamfered on edge including troating slightly complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Shutters of any description n.exc 2 sq. m each complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 35 mm thick flush shutter with solid core construction with block board core and plywood face panels , commercial type on both sides members of shutters, covered decorative on both face veneer with liping/frame to match as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkats complete all as specified and as directed.

S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters complete all as specified and as directed.

S&F Pressed steel frame for doors of size 125 X 60mm frabicated out & 1.25mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F Pressed steel frame for doors of size 105 X 60mm fabricated out & 1.25mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed.

M&L for Aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for Aluminium anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m powder coated (minimum wt of powder coating 50 micron) including necessary joitning cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed complete all as specified and as directed.

S&F Extruded Aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and as directed.

S&F Stainless steel Butt hinges of size 100mm, medium weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F in repairs Floor door stopper of brass body, and tongue with hard drawn steel spring hard overall length of cover plate 140mm complete all as specified and as directed.

S&F in repairs PVC door seal fixed with wooden door complete all as specified and as directed.

S&F in repairs stainless steel peg stay having 8 hooks fixed with wall or wooden door complete all as specified and as directed.

S&F in repairs aluminum (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F in reapirs Stainless steel curtain rod 25 mm dia with necessary brackets including CP decorative end holders complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F figured glass 4mm thick pin head type and glazing to aluminium frame in squares n exc. 0.5 sqm metre in each pane complete all as specified and as directed.

S&F sheet glass, ordinary quality 4mm thick and glazing/fixed to aluminium/ Steel/ wooden frame in square exc. 0.5 square metre in each pane complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and directed.

M&L for 50 mm thick PCC type C1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L PCC 75mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for Chequered cement concrete tiles (with white cement and pigment) 30cm x 30cm x 25mm thick rubber moulded glossey finish, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigment complete all as specified and directed.

M&L for sand filling under floors incl consolidation etc complete for laying paver blocks complete all as specified and directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and as directed.

Dismantling of stone slab of any description of thickness in floors & aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for coloured Non Skid ceramic joint free tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15 mm thick screed bed in C: M (1 : 6 ) complete all as specified and directed.

M&L non skid cermic ENDURA coloured tiles 7-8mm thick (square/rectangular) area of each exc 0.06 Sqm but n. exc. 0.11 Sqm as in floors set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.

M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in C:M (1:4) complete all as specified and as directed.

All as per item 37 above but as in skirting/ dado over and including 10 mm thick rendering in CM 1:4.

M&L for 20mm thick granite of (any type) work (table rubbed and polished) in steps jambs,window cills, cooking platform pillars and like in cement mortar (1:4) screed bed of mortar 15mm thick for laying floor pointing inwhite cement (1:2) using marbal dust with admixture of pigment to match the colour including rounded/ half rounded edge and hole for gas pipe in pre-cast slab complete all as specified and as directed..

M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointd with pigment to match the shade of the slab including rubbing and polishing including screed bed and bedding layer of mortar 15 mm thick for laying floor finishes use CM 1:4 size complete all as specified and as directed.

M&L kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item above including 15 mm thick cement plaster use CM 1:4 complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick/ concrete surfaces finished the surface even and smooth without using extra cement, using 200 ml water proofing liquid per bag of 50 Kgs cement complete all as specified and directed. Note: Qty for water proofing chemical will be measured saperately.

M & L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:6) on fair faces of brick/ concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 over 10 mm thick in CM 1:4 dubbing coat on ceiling surfaces of concrete finishing the surface even & smooth (without using extra cement) complete all as specified and directed.

Supply only Liquid water proofing compound of complete all as specified and directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and directed.

Taking down boarding as in kitchen cabinet, cup boards/ shelfs / partitions complete all as specified and as directed.

S&F 18 mm thick Rajshri solid PVC Kitchen celuka ply one side prelam sheet kitchen/ cupboard cabinet shutter of density 600 kg/cum bent at 90 degree as per modular kitchen and finish all edges at level for making edge lipping/ bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding lape etc as per Manufacture's specification complete all as specified and as directed.

S & F factory made PVC Cabinet of required size fabricated by joining 12 mm thick PVC celuka ply fixed with each other using solvent cement fixed with screw and solvent cement adhesive etc. complete all as specified and as directed.

S&F 18mm thick factory made PVC shelf/partion of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partion and shall provided 3 edges in size18 mmx 18mm as per required lengththe front side of the edge visible in the front of the shelf /partion to be edge lipped by 18 mm widthx1mm thick PVC sheet of density 600 kg/cum manufactured complete all as specified and as directed.

S & F Ball bearing runners 450 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and as directed.

S & F stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and as directed. Make-KAFF, Godrej & Hettich.

S & F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed. Make- KAFF, Godrej & Hettich.

S&F Continous piano hinges , stainless steel, bright finish or electro galvanised having width of flaps 30mm ( when open) complete all as specified and directed.

S&F stainless steel 304 grade kitchen modular basket for storgage of plates, cups, grains basket, glass cutlery, bottles etc as per required size complete all as specified and as directed.

S&F Magnatic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and as directed. Make : KAFF/Godrej/Hettich

S&F extruded stainless steel handles, cast type polished bright of 150 mm size for cupboard shutters complete all as specified and as directed. Make : KAFF/Godrej/Hettich

S&F stainless steel Tower bolt 150 mm size for kitchen cabinet complete all as specified and as directed. Make : KAFF/Godrej/Hettich

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Taking up or down steel tubing and connections ,15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

S&F in repair white european type combination pattern WC casket type christinna with mounted flushing cistern,PVC connection,seat cover and jointed to sewage pipe complete all specified and as directed.

S&F in repair Vitrreous china wash down water closet pan (Pedestal Pattern) white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern white, with inlet, bell valve, float, handle and 32mm dia PVC flush pipe complete all as specified and as directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and as directed.

S&F in repair vitreous chinaware wash hand basin white flat back size 545x400mm excluding taps, waste, chain but including brackets waste coupling and waste pipe complete all as specified and as directed.

M&L in repair single lever WHB mixer 15mm cast copper alloy chromium plated bore complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repairs Stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen incl waste pipe CI cantilever brackets and waste coupling etc complete and making good to the side of wall,connecting union to pipe, including bedding in CM to dwarf wall. Overall size 915mmx460mm bowl and size 410x330x160mm complete all as specified and as directed.

S&F in repair sink mixer 15 mm bore with extended swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, dual flushing system including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair Hand jet health faucet 15 mm bore ABS body with SS flexible pipe 1.20 Mtr long all connected fittings completed all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair Angular cock 15 mm bore with wall flange complete all as specified as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair Two way Angle cock 15 mm bore with wall flange complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair stainless steel Jet spray with 1.20 mtr hose fixed with EWC complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair tolilet paper holder, vitreous china colour, box type fixed to walls with cromium plated (CP) brass screws complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&f in repair two way bib cock superior quality with wall flange fixing to 15 mm bore pipe complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair Bib cock 15 mm bore with wall flange complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair Bip tap with long body standard of cromium plated any colour screwed for iron pipe of 15mm bore complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repairs concealed stop cock reduced body with adjustable wall Flange for 15mm bore pipe complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repairs wall mixer 15 mm bore with connector, including hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repairs Hand shower 15 mm bore (ABS brass chromium plated body) 8mm dia, 1.20mtr long of flexible tube & wall hook complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair over head shower (with Arm) dia 300 mm round shape single flow (body and face plate stainless steel with chrome finish) with rubit cleaning system complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and as directed.

S&F in repair corner glass shelf with bracket fixed to wall complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair towel Rack 600 mm long with lower Hangers complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F in repair chromium plated Towel Rail 600 mm long complete all as specified and as directed. Make : Jaquar/Kohler/Grohe.

S&F SS waste coupling of PTMT for 32mm bore discharge pipe for WHB/ Sink complete as specified and as directed.

S&F in repairs PVC flexible waste pipe 32 mm dia complete all as specified and as directed.

S&F in repairs PVC flexible waste pipe 40mm dia complete all as specified and as directed.

S&F SS Bottle trap of 32mm bore dia of discharge pipe having min. water seal of 25mm (min. weight 260gms) complete all as specified and as directed.

S&F Grating doom 100mm dia with hole of PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 900mm x 750mm x 255 mm complete all as specified and as directed.

Cleaning of HDPE tank of capacity up to & including 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as specified and as directed.

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including dismantling water tank and remove to store of 500 Ltr capacity complete all as specified and directed.

All as per item No. 111 above but of 1000 Ltr capacity

S&F in repairs 20mm bore Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm-65gms) complete all as specified and as directed.

S&F Ball brass valve high pressure with polythene float and fly nuts complete screwed for 20 mm bore dia iron pipes or brass ferrule and fixed complete all as specified and as directed.

S&F in repair Ball brass valve high pressure with polythene float and fly nuts complete screwed for 20 mm bore dia iron pipes or brass ferrule and fixed complete all as specified and as directed.

S&F in repair gun matel, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating type with frame including nut bolt complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls incl necessary clamps etc incl dismantling old pipes complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls incl necessary clamps etc incl dismantling old pipes complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal with acess door 110 mm bore complete all as specified and as directed.

S&F PVC (SWR), vent cowl 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal with acess door 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain with S S grating including jointing with solvent cement dia of out let 75 mm complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of exterior emulsion paint Apex of Asian or equivalent complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint on newly plastered surfaces of wall complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for wall care putty 1mm thick on new plastered wall surfaces complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coat of distemper oil emulsion over a coat of alklai resitant primer on wall surfaces complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a red oxide primer complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of frames etc. complete all as specified and as directed.

B S ENTERPRISES

M/S SHRI RAM INFRASTRUCTURE

ARCHI ENGINEERS

AHMED CONSTRUCTIONS