SPECIAL REPAIRS TO OMQS BLOCK NO 3 AT ORC OF AF STATION BEGUMPET UNDER GE AF HAKIMPET

Amount

SCHEDULE 'A' PART - I B/R PORTION : - Dismantling floor , hearth or wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and rubbish of the premises complete all as directed.

Demolition of plain cement cement concrete / terrazo tiles with cement mortor bedding in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as directed.

Demolitio of plain cement concrete of any description and in any position as in padding concrete, sunken slabs coping, benching, kerbs or mud stops etc complete all as directed.

M & L for 75 mm thick Plain Cement concrete 1:3:6 type C-2 mix using 40 mm graded crushed stone aggregates as in plinth protection, hard standing, sub base, floor finishes etc complete all specified and as directed.

Demolition of RCC as in roofs / chajjas and similar suspended work complete all specified and as directed.

M & L for 25 mm thick Plain Cement concrete 1:2:4 type B-1,mix (using 20 mm graded stone aggregate) as in floors etc complete all specified and as directed.

M&L for 15 mmm thick screed bed or bedding layer of cement mortar in CM 1:4 for laying floor tiles etc complete all specified and as directed.

M&L for Double charged Vitrified Ceramic tiles 10 mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in cement slurry and pointed in white or coloured cement to match complete all specified and as directed.

Description all as per item No.8 here-in-before but as in vertical surfaces such as skirting etc. to match with the flooring complete all specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all specified and as directed.

Description all as per item No.10 here-in-before but as in vertical surfaces such as skirting etc. to match with the flooring complete all specified and as directed.

M&L for colourd non skid ceramic tiles 300 mm X 300 mm X 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n.exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling as in shirting / dado etc complete all specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350 mm x 250 mm x 7 mm or 450 mm X 350 mm X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces or surface other than fair face of brick work or on one side of lathing including finishing the surfaces even and smooth without using extra cement complete all specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing with water proofing compound at 3% by weight of cement and rendering is to be finished even and smooth without using extra cement complete all specified and as directed. (NOTE :- WPC will be measured and paid separately under relevant item of BOQ)

M&L for rendering 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement complete all specified and as directed.

M&L washing,rubbing down and stopping of distempered and painted surfaces of walls and applying alkali resistant priming paint complete all specified and as directed.

M&L for applying one coat of 2 mm thick putty finish to obtain smooth fnished wall surfaces complete all specified and as directed.

M&L for preparation of plastered / priming surfaces and applying two coats of distempering to walls with distemper oil emulsion complete all specified and as directed.

M&L for washing,rubbing down and stopping of distempered and painted surfaces on ceilings and applying alkali resistant priming paint complete all specified and as directed.

M&L for applying one coat of 2 mm thick putty finish to obtain smooth fnished ceiling surfaces complete all specified and as directed.

M & l for preparing new / old plastered / priming surfaces of ceilings and applying two coats of oil bound distemper on ceiling surfaces complete all specified and as directed.

M&L for Flush / raised pointing in CM 1:4 to squared rubble masonry, coursed complete all specified and as directed.

M&L for Precast reinforced cement concrete (1:2:4) type B-1 mix (using 20 mm graded stone aggregate ) for manhole cover slabs including necessary form work and set in CM (1:4) complete all specified and as directed.

M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded complete all specified and as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6.0 mtr mean radius built in CM (1:6) as in manholes etc complete all specified and as directed.

Demolition of brick work built in CM including all Quions, arches, pillars etc complete all specified and as directed.

M&L for Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but not exc 20 cm girth complete all specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore complete all specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore complete all specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store 25 mm bore complete all specified and as directed.

S&F 15 mm bore tubes medium grade galvanised, with all fittings and fixed complete to walls or ceilings or laid in floors complete all specified and as directed.

S&F 20 mm bore tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all specified and as directed.

S&F25 mm bore tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all specified and as directed.

S&F 20 mm bore Gun metal gate / globe valves with iron wheel head screwed both ends for iron pipe and fixed complete all specified and as directed.

M &L for Cleaning & Removing all scale & dirt etc from tanks and from mouths of circulating pipes and refixing in same position etc Capacity of tank exc 500 but not.exc 1000 ltrs capacity complete all specified and as directed.

Dismantling water tank of capacity exc 500 but not exc 1000 ltrs complete all specified and as directed.

S&F 1000 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position complete all specified and as directed.

S&F in repairs 25 mm bore Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed complete all specified and as directed. (Minimum weight 455 gms)

Demolition and breaking up of AC drain pipes 100 mm dia set in CM complete all specified and as directed.

Demolition and breaking up of AC drain pipes 75 mm dia set in CM complete all specified and as directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. complete all specified and as directed.

S&F 150 mm X150 mm Salt-glazed stone ware gully traps, square, type 'P' complete all specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radiuis complete all specified and as directed.

S&F 110 mm bore PVC (SWR) bends with oval access door any radiuis complete all specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radiuis complete all specified and as directed.

S&F 75 mm bore PVC (SWR) bends with oval access door any radiuis complete all specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) complete all specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) with oval access door complete all specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (single T) complete complete all specified and as directed.

S&F 75mm bore PVC (SWR) junction single, (single T) with oval access door complete all specified and as directed.

M&L for cutting holes in stone masnory walls built in cement mortor and making good in CM 1:3 or in cement concrete 1:2:4 tupe B1 as required superficial area exc 150 sq cm but not exc 400 sq cm complete all specified and as directed.

S&F in repairs vitreous china wash down water closet pedestral pan white / coloured, including 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs vitreous china squating pan orrissa pattern size 580 mm x 440 mm white with integral foot rest , including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs vitreous china wash basins, white, flat back, size 550 mm X 400 mm including brackets, waste fittings, brass, chromium plated 32 mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, pillar tap, casr copper alloy, chromium plated fancy type screwed type high pressure, with long screwed shanks and fly-nuts, PVC waste pipe of 32 mm bore 75 cm long, complete all as specified and as directed

S&F stainless Steel sink with drainage board made of stainless steel 1 mm thick kichen with plugs washers and wastes, including fixing cantilever brackets and connecting union to pipe over all size 915 mm X 460 mm with bowl size 410 mm X 330mm X 160 mm including PVC waste pipe of 38 mm bore and 75 cm long complete all specified and as directed.

S&F in repairs stainless steel plate rack of size 2' X 3' (600 mm x 900 mm) of grade 300 series as per sample kept in the Office of the GE fixed to wall complete all specified and as directed.

S&F 100 mm round chromium plated telephonic shower with 1.5 mtr flex tube and wall havels complete all specified and as directed. (Make :- Jaguar CAT No.SHA 571 & HSH 1937 or equivalent approved make)

S & F for Chromium plated wall mixer 3-in-1 system with provision of for both hand shower & over head shower complete with 115 mm long bend pipe on upper side, connecting legs & flanges (without hand and overhead shower) complete all specified and as directed. (Make :- Jaquar code No. CQT-CQT-23273UPR or equivalent approved make)

S&F CP Angular stop cock 15 mm complete all specified and as directed. (Make :- Jaguar Cat No :CQT-CHR-23053 or equivalent approved make)

S & F stailless steel toilet paper holder with flap complete all specified and as directed. (Make :- JAGUOR code No.ACN-CHR-1153N or equivalent approved make)

S & F Chromium plated two way bib cock with flanges complete all specified and as directed. (Make :- Jaguar Cat No DRC-CHR-37041 or equivalent approved make)

S & F Single Stainless steel towel rail 600 mm long complete all specified and as directed. (Make :- Jaguar Cat No CAN-CHR-1111NM or equivalent approved make)

S & F Soap dish holder complete all specified and as directed. (Make :- Jaguar cat No AKP-CHR-35731P or equivalent approved make)

S& F in repairs looking mirror of any size rectagular fancy type having boarders of glass fixed to walls complete all specified and as directed.

S&F chromium plated heavy duty coat hook having 2 Nos of hooks fixed with the existing door with necessary screws etc complete all specified and as directed. (Make :- Jaquor CAT No 35761 or equivalent approved make)

S & F health faucet withflex pipe and hand shover ,the length of hose 1.0 mtr fitted to the tap complete all as specified and as directed. (Make :- JAGUOR Code No ALD CHR 565 or equivalent approved make)

S&F cornner glass shelf of size 9" x 9" shelf and front,circle in design fixed over chromium plated brackets of heavy duty with front linings with glass fixed in wall with necessary screws complete all as specified and as directed. (Make :- Jaquor CAT No ACR 1173 or equivalent approved make)

S & F in repairs single flow over head shower 100 mm dia chromium plated fancy type bottom with rubber holes complete all as specified and as directed. (Make :- Jaquor Code No OHS-CHR-1989 or equivalent approved make)

S&F in repairs PVC wall cabinet 320 mm X 350 mm X 270 mm with single door fixed to wall complete all as specified and as directed. (Make :- SEAGULL of Cat No: SSMPL-04 or equivalent make approved by GE)

S&F in repairs glass shelf 600 mm long fixed to wall complete all as specified and as directed. (Make :- Jaquar Cat No: 7771 or equivalent as approved by GE)

M&L for preparation of old plastered surfaces of walls and applying one coat of cement based paint complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint complete all as specified and as directed

M&L for applying three coats of white wash including preparation of surfaces of ceilings complete all as specified and as directed

M&L for applying three coats of white wash including preparation of surfaces on wall complete all as specified and as directed

S&F Steel rolling shutters Thickness of laths 1.0 mm, with out ball bearings, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and as directed

M&L for overhauling of sliding steel door / rolling shutter not exceeding 12.0 sqm gear / hand operated completely including loosening / tighening any type of hinges and gresing / oiling the top and bottom complete all as specified and as directed

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed

M&L for Brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4 type B- 0 mix using 12.5 mm graded stone aggregate as in terrace including water proofing compound and finished even surface complete all as specified and as directed. (NOTE :- WPC will be measured and paid separately under relevant item of BOQ)

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and as directed. (NOTE :- WPC will be measured and paid separately under relevant item of BOQ)

M&L for Providing, cement concrete 1:2:4 type B- 0 mix (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement complete all as specified and as directed. (NOTE :- WPC will be measured and paid separately under relevant item of BOQ)

S&F Terrazzo tiles with grey cement and no pigments 30 cm x 30 cm x 20 mm thick, with size of chips upto 12 mm set, jointed and pointed in neat cement slurry as in floors, and cut and polished complete all as specified and as directed.

M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg / sqm providing and laying 4.0 mm thick APP modified water proofing membrane weight not less than 4.0 kg / sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified ad as directed.

Supply Only integral water proofing compound as per manufactures instruction complete all as specified ad as directed.

S&F 25 mm dia Stainless Steel Curtain Rod fancy type complete all as specified ad as directed.

M & Labour for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified ad as directed.

Hacking out old broken glass (any thickness, size,quality or description ) from wooden frames, glazed with beads etc complete all as specified ad as directed.

S&F 3.0 mm thick sheet glass ordinary quality fixing with poutty in squre n.exc 0.5 sqm in each pane complete all as specified ad as directed.

S&F 3.0 mm thick frosted glass ordinary quality fixing with poutty in squre n.exc 0.5 sqm in each pane complete all as specified ad as directed.

S&F 1st class hard wood beads, straight (any size) for glazed or guaged joinery, renewed, including mitres etc. and removing old beads complete all as specified ad as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stain less steel wire staples complete all as specified ad as directed.

Taking down chowkats with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but not exc. 4.0 Sqm each complete all as specified ad as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified ad as directed.

S & FPressed steel frames (size 125 mm x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified ad as directed.

M&L for PCC 1:3:6 type B- 1 mix (using 20 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound as per manufacturers instrucions complete all as specified ad as directed. (NOTE :- WPC will be measured and paid separately under relevant item of BOQ)

S&F 40 mm thick flush door shhutters solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S & F for 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples complete all as specified and as directed.

Taking down chowkats with shutter ( without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and as directed.

S&F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint complete all as specified and as directed.

S & F in repairs Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S & F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as specified and as directed.

S&F 30 mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (b), supplied & fitted to chowkats. complete all as specified and as directed.

M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint overa coat of pink primer complete all as specified and as directed.

M&L preparation of old wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges,steel handle,steel peg stays etc without glazing bars dovetailed or welded. complete all as specified and as directed.

S&F Steel ventilators with top hung shutters including hinges, steel peg stay etc. complete all as specifed and as directed.

M&L for cutting holes in stone walls built in cement mortor for inserting hold fasts and amking good in CM 1:4 or cement concrete 1:2:4 type b1 as required exc one brick but not exc two bricks complete all as specified and as directed

S&F MS hold fasts cut to length bent to shape as required drilling holes and fixing with MS screws etc complete all as specified and as directed.

Dismantling mild steel work as in wind Tie , grill grating etc complete all as specified and as directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F 100 mm long MS butt hinges, medium weight cold rolled mild steel complete all as specified and as directed..

S&F 75 mm long MS butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long extruided aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 100 mm long extruided aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hartd drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc complete all as specified and as directed.

S&F in repairs 1st class hard wood plain fillets rectangular exc. 3.0 sq cm but not exc 6.0 sqcm wrought fixed with screws complete all as specified and as directed.

M&L for cup board shutters particle boards both side laminated of any colour/patern and thickness 18 mm as specified and equired including beadings and hinges, trollers, handles, catchers and locking arrangement complete all as specified and as directed.

S&F 100 mm Rim latch with two levers, of aluminium alloy body, with brass knob or lever handle and fixed complete all as specified and as directed.

M & L for Kota stone slab 20-25 mm thick in riser of steps and pillar laid over cements screed and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

SCHEDULE 'A' PART -II E/M PORTION : - Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed.

Taking down unserviceable MCB DBs, Metal clad DBs along with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed.

Taking down unserviceable electric energy meter of any description and depositing to AGE E/M Store yard complete all as directed.

Taking down unserviceable Security light fittings of any description including service bracket, clamps nut bolts etc complete all as directed..

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, complete all as specified and as directed for the following :-

(a) One light point controlled by one one way switch .

(b) One light point controlled by one two way switch .

(c) One ceiling fan point controlled by one one way switch.

(d) One Exhaust fan point controlled by one one way switch.

(e) One 3 pin socket outlet 5 Amps on the same board with other switches.

(f) One 3 pin socket outlet 5 Amps on the Independent board.

(g) One bell/buzzer point controlled by one push button on the same board with other switches or independent.

Description all as per Ser item No.140 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

S&F Modular switch 6 Amps, 1 way complete all as specified and as directed.

S&F Modular switch 6 Amps, 2 way complete all as specified and as directed.

S&F Modular switch 16 Amps, 1 way complete all as specified and as directed.

S&F Socket outlet 6 Amps modular complete all as specified and as directed.

S&F Socket outlet 16 Amps modular complete all as specified and as directed.

S&*F switch bell push modular complete all as specified and as directed.

S&F Stepped type fan regulator (4steps), 120 W-2 modular. complete all as specified and as directed.

S&F Electric bell/ buzzer 230 volts, single pole, 240 V complete all as specified and as directed.

S&F in repairs ceiling rose, 3 terminal, PVC / Polycarbonate isolated body complete all as specified and as directed.

S&F in repairs Lamp holder PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in repairs Modular Telephone socket complete all as specified and as directed.

S&F in repairs Modular TV socket. complete all as specified and as directed.

M&L for Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn through and including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finishing to match with the sorroundings) and including provision of 1.5 sqmm PVC insulated FRLS copper cable as earth continuity conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3.0 mm thick hylum sheet for fixing the switches / sockets/ regulators etc complete all as specified and as directed for the following :-

(a) One light point controlled by one way switch .

(b) One ceiling fan point controlled by one way switch.

(d) One 3 pin socket outlet 5 Amps on the same board with other switches.

(e) One 3 pin socket outlet 5 Amps on the Independent board.

S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete all as specified and as directed.

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volts. complete all as specified and as directed.

S&F Stepped type electronic fan regulator flush type on laminated sheet for 1200 mm sweep fans complete all as specified and as directed.

M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia for Tele & TV points complete all as specified and as directed.

S & F 20 W LED light fitting 2" wall mounted New E-Lite LED Triyca batten. A Color changing LED batten with options of 3000 K, 4000 K & 6500 K, all in one fixture extruded aluminium heat sink provided for efficient heat dissipation & intergrated electronic driver including suitable copper cable complete all as specified and as directed.

S & F 20 W LED light fitting 4" wall mounted New E-Lite LED Triyca batten. A Color changing LED batten with options of 3000 K, 4000 K & 6500 K, all in one fixture extruded aluminium heat sink provided for efficient heat dissipation & intergrated electronic driver including suitable copper cable complete all as specified and as directed.

M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and as directed.

Dismantling the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed.

Taking down the electric Geyser of capacity 25 ltrs / 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections, dismantling the unit and painting with one coat of synthetic enamel paint and refixing in its original position and reconnecting the inlet/ outlet water pipes and testing on completion complete all as specified and as directed.

M&L for Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. complete all as specified and as directed. NOTE: - Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length

Description all as per Ser item No. 164 above but with 2 x 4.0 Sqmm + 1 x 4 Sqmm complete all as specified and as directed. NOTE:- Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Description all as per Ser item No. 164 above but with 2 x 1.5 Sqmm + 1 x 1.5 Sqmm complete all as specified and as directed.. NOTE:- Two runs of 1.5 sqmm cable conductor, one run of 1.5 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Description all as per Ser item No. 164 above but with 2 x 10.0 Sqmm + 1 x 10.0 Sqmm complete all as specified and as directed. NOTE: Two runs of 10.0 sqmm cable conductor, one run of 10.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

M&L for Providing suitable hole in stone masonary wall for fixing of Exhaust fan of 230 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall complete all as specified and as directed.

Supply and fix MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete including taking down existing DB sheet metal including MCB all as specified and as directed by the Engineer-in-charge, including taking down complete all as specified and as directed.

S&F sheet metal enclosure for vertical distribution board when MCCB for in coming and MCBs for out going to be used VTPN 4 way , 415 volts double door complete all as specified and as directed. Note :- MCCB and MCB will be measured and paid separately under relevant items.

S&F MCB distribution board double door type, SPN 8 way sheet steel powder painted with bus bar neutral link earth bar etc complete all as specified and as directed.

S&F MCB distribution board double door type, SPN 4 way sheet steel powder painted with bus bar neutral link earth bar etc complete all as specified and as directed.

Supply & fixed MCCB 3 pole, 415V, fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and as directed.

Supply & fix, MCB SPN 40 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

Supply & fix MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F security light fitting 1x20 LED type, drawn through and including GI bracket made of 25mm dia, med grade pipe of 1.4 mtr length, bend to shape including MS clamps made out of flat iron of size 32 mm x 4 mm -02 Nos. and necessary nuts, bolts, washer as required complete all as specified and as directed.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600 mm x 600 mm x 6 mm thick as earth electrode with top edge of the earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in Electrical Plate No 5 of SSR part I 2009 complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected to & including the galvanized iron trip 32 x 6mm by (upto 7.5m) welding and brought upto 1.0 mtr above plinth protection, including proviion of suitable ize of light grade GI pipe for protection of galvanized iron trip up to plinth and further connecting with GI wire to distribution board, including excavation, earth work, Charcoal & salt , 30cms layer of two parts of bentonite mixed with one part BC/loomy/garden soil and four parts of water all around the charcoal, salt mixture all as directed , PCC chamber, RCC cover lab, watering pipe 20 mm dia bore med. grade wire net, funnel etc. & testing on completion all, as specified in electrical plate No.3 of ssr Pt, including taking down exisiting earthing complete all as specified and as directed.. Note :- GI Pipe for earth lead protection will meaured and paid in relevant items.

supply , lay and /fix GI Protection pipe , 40 mm dia, light grade , including taking down old pipe . complete all as specified and as directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to wall or any other indicated situation for loop earthing etc. as required 4.0 mm dia galvanised iron or steel wire,including taking down complete all as specified and as directed.

Supply, install, test and commissioning of custom designed, with separate compartments for incoming MCCBs, meters, wall mounted LT cubicle panel board, indoor type, fixed in wall with suitable clamping arrangement, with aluminium bus bar of 200 Amps capacity (3 for Phase + 01 Neutral), 3phase, 4 wire, 50 C/S, fabricated out of 2.0 mm thick MS sheet, internally connected with suitable capacity of copper cable, including making good the disturbed floor complete all as specified and as directed for comprising of the following accessories :-

(a) MCCB TPN 160A,35KA, - 01 No (Incoming)

(b) MCCB TP 63A, 25 KA - 04 Nos

(c) MCB SPN 40A - 05 Nos

(d) Microprocessor based three phase electronic tamper proof energy meter of rating 10 to 60 Amp with optical communication port, conforming to IS: 13779 - 04 Nos

(e) Microprocessor based single phase electronic tamper proof energy meter of rating 0 to 10 Amp with optical communication port, conforming to IS: 13779 - 01 No

(f) Indicator Lamps RYB LED-01 set

(h) Internal Power & control wiring with suitable PVC insulated copper wire

Dwarka Pershad Radhey Ramanlal

A SOMA RAJU

STANDARD AGENCIES

M/s RAMA LAKSHMI CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

rahi consultant