REPAIR TO CERTAIN B/R AND E/M WORKS AT DAQAW (A) MURADNAGAR UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M&L coloured Glazed ceramic tiles of size 450mmX 300mmX 7mm thick as on vertical surfaces such as skirting/dados set and jointed in neat cement slurry and pointed in white or colour cement complete all as specified and directed.

M&L 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 10mm thick rendering cement mortar 1:4 for recieving skirting/dado tiles complete all as specified and directed.

S&F in repair hollow PVC wall lining consisting of 5mm thick plain/printed colour PVC sheet inclusive of solvent cement and fixing on PVC frame including corner (sides, top, bottom and corner) as per specification and drawing. Complete all as specified and directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15mm bore complete all as specified and directed.

S&F in repair fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed.

S&F in repair fancy type CP angle valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed.

S&F in repairs flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl all necessary fittings complete all as specified and directed.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and as directed.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed.

S&F in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

S&F in repair CP towel ring. Complete all as specified and as directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

S&F in repair Cast iron Nahani trap 100mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litre capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

S&F factory made single extruded WPC (wood polymer composite) solid door frames of chowkhats of size 65x125mm comprising of virgin PVC Poymer of K VALUE 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC aolvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/Cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm², moduiles of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being teRMite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F factory made 30mm thick soild flush door plain/pre-laminated WPC (wood polymer composite) moulded shutter with different design and both side plain required size comprising of virgin WPC resin of K value 58-60(suspended grade) calcium carbonate and natural fibres (wood/powders/rice husk/wheat husk) and nontoxic additives made from extrusion process WPC foam sheet single extruded (inner) with density not less 600 kg/cbm, having good screw holding capacity (screw withdrawal strengthof 2000N (face) & 100N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity 850 N/mm² and resistance of spread of flame of class A category with property of being teRMite/borer free. Water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. Including tower bolt, handle etc. The design and fittings approved by Engr-in-charge. Complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F 100mm butt hinges stainless steel complete all as specified and directed.

S&F in repair powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing fixed in aluminium window in square nexc 0.5Sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick Work or concrete curface and finished fair & even in cement mortar 1:6 complete all as specified and as directed.

M & L for rendering 15 mm thick plaster in cement mortar (1:4) in two coats (10mm thick backing coat and 5 mm thick finishing coat) on other than fair faces of brick work or concrete surfaces mixed with water proofing compound (WPC) @ 3% of weight of cement consumed or as per manufacturer’s instructions, finished even and fair complete all as specified and directed. Note:- Water proofing compound consumed in this item will be measured & paid separtely under "supply only" items.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as on ceiling complete all as specified and as directed

M&L for treatment on new plasterd external surface on wall applying 1mm thick wall care putty and over two coats of exterior grade weather proof acrylic emulsion paint (apex ultima). Complete all as specified and directed.

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on complete all as specified and directed.

M & L for preparation of new plastered surfaces on wall applying 1mm thick wall care putty and two coats of oil bound distemper complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and directed.

M & L for preparation of old plastered surfaces on wall applying 1mm thick wall care putty and two coats oil bound distemper. complete all as specified and directed.

M&L for preparation of old plasterd external surface on wall including complete removal of existing treatment and applying 1mm thick wall putty wherever required to achieve and smooth surface and then applying two coats of exterior grade weather proof acrylic emulsion paint (apex ultima) complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed.

Supply and fixing vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and unionfor discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm lng brass screws, pointing around urinal back in cement; fixing including waste pipe cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repapir vitreous china urinal partion incl all necessry fixing arrangement complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n. exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks three layered IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

M&L in repair 12mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed in aluminium door with all necessary items complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings/window proj complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ window projection to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) as in sub-base complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L Providing, cement concrete type B-1, 1:2:4 (20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unserviceable main switch, DBs with MCBs any size and capacity including making good disturbed surface of wall complete all as specified and directed.

Taking down and disconnecting ceiling fan of any size, sealing cable end, dismentalling blades, make one set of three blades and depositing to MES store yard for keeping in safe custody and refixing after completion of work as per requirement complete all as specified and directed.

M & L for point wiring using 1.50 Sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS-H) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 Sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface for One tube light/Bulb/ security light/ bell/fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. Note:- also includes inverter wiring with one run of inverter wire 1.5 Sqmm all alongwith circuit also included. complete all as specified and directed.

All as per serial item No. 76 here-in-before but with 2.5 Sqmm nominal cross-sectional area copper conductor cable for one 5/6 Amps socket on independent board point controlled by one, one way switch 5/6 Amp complete all as specified and directed.

All as per serial item No. 76 here-in-before but with 2.5 Sqmm nominal cross-sectional area copper conductor cable for one 5/6 Amps socket on same board point controlled by one, one way switch 5/6 Amp complete all as specified and directed.

All as per serial item No. 76 here-in-before but with 2.5 Sqmm nominal cross-sectional area copper conductor cable for one light/fan point given from 5/6 Amps socket on same board point controlled by one, one way switch 5/6 Amp complete all as specified and directed.

M&L for power point wiring of copper cable FRLS grade,multi stranded 2.5 Sqmm size for 15/16 Amps socket outlet on independent board with 2.5 Sqmm size of copper cable FRLS-H grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel teRMinal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 2.50 Sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed.

Supply and fixing modular switch 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fixing piano switch 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fixing modular socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing of modular socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed .

Supply and fixing modular fan regulator AC , 230 volts 2 module 120 W on the existing sheet duly ISI marked with and including connector complete all as specified and directed.

Supply and fix in modular switch 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.

Supply and fixing LED lamp 9 watt suitable for batten/ angular holder complete all as specified and directed. Make-. Havells/Crompton/Bajaj

Supply and fixing in repair decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing and integrated electronic driver with all accessories and fixing material complete all as specified and directed. Make- Crompton/Bajaj/ Havells

Supply and fixing in repair decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed. Make- Crompton/Havells/Bajaj

Supply and fixing in repair 45W LED security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver with die cast aluminium housing IP 66 protection with lens embedded PC cover including security light brackets made of 32 mm dia GI pipe medium grade upto 0.9 mtr long bend to shape at 100-120 degree including flat iron clamps and suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed. Make:- Crompton/Havells/Bajaj

Supply & fixing of ceiling rose, 3 terminal , PVC/polycarbonate isolated body complete all as specified & directed.

S & F of sub main wiring alongwith earthwire for two single core 10.00 Sqmm size sub main wiring with one single core 10.00 Sqmm size earthwire drawn into and including one run 25 mm non-metalic dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly including taking down old unserviceable submain wiring complete all as specified and directed. Note:- 01x10.00 Sqmm + 02x10 Sqmm main wire alongwith 25mm non-metalic PVC conduit shall be measerud as one unit length.

S & F of sub main wiring alongwith earthwire for two single core 4.00 Sqmm size sub main wiring with one single core 4.00 Sqmm size earthwire drawn into and including one run 25 mm dia non-metalic PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly including taking down old unserviceable submain wiring complete all as specified and directed. Note:- 01x04.00 Sqmm earth wire + 02x 04 Sqmm main wire alongwith 25mm dia non-metalic PVC conduit shall be measerud as one unit length.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F in repair PVC rigid conduit medium grade including all cutting, chasing, bends and including all fitting accessories and making good the disturbed surfaces of walls, ceilings etc including two coats of white/ colour washing/ distempering etc to match the existing complete all as specified and directed.

S&F in repair MCB, SP, AC, 240 volts "B" series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed.

S&F in repair MCB, SPN, AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

S&F in repair MCCB 4 pole,200 Amps 25 kA with fixed overload and fixed short circuit setting Ics of 100% Icu complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI earth lead wire 4.0mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s/ Machinery etc including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Note:- (i) The cost of earth electrode, main earthing lead (from earth electrode to test point) up to 7.5 metre, connecting earth electrode & earthing lead as specified and adequate quantity of charcoal, dust, common salt shall be included in this item. (ii) Earth electrode beyond 7.5 metre shall be measured and paid separetely. (iii) If the desired earth resistance in not found within permissible limit, shall be redone by contractor at no extra cost.

Supply and fixing light duty Exhaust fan made of sturdy engineering STEEL complete with louvers shutter, voltage 230 V, 50 Hz, Rpm 1200, copper winding and fixing accessories 230 Volt and 300mm sweep with and including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 including taking down old unserviceable one and deposited to AGE E/M-II store yard complete all as specified and directed. Make:- Usha, Crompton, Havells, Bajaj

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor ( BLDC) including taking down old unserviceable one & deposited to AGE E/M-II store yard complete all as specified and directed.

Supply and install hi wall split AC units indoor/ outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2.0 TR including taking down old unserviceable one & deposited to AGE E/M-II store yard complete all as specified and directed.

Supply and install hi wall split AC units indoor/ outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR including taking down old unserviceable one & deposited to AGE E/M-II store yard complete all as specified and directed.

Supply and fixing in repair three phase manual change over 415 volts 100 amps including making connection complete all as specified and directed.

Supply and fixing of automatic operation single phase 05 KVA capacity stabilizer, naturally air cooled and designed for input voltage of 175volts to 250 volts and output voltage stablilized at 230 volts with accuracy of + 2.50% including taking down old unserviceable one & deposited to AGE E/M-II store yard complete all as specified and directed.

Supply and fix in repair metal plug and socket with MCB SPN 20 Amp metallic P&S and steel enclosure complete all as specified and directed.

Supply and fixing in repair vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Supplying and fixing in repair recess mounting LED 2X2 luminaire 34/36 W CRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame, including all acessories all as specified and directed by Engr-in-Charge. Make-Havells/Crompton/Bajaj

S.P CONSTRUCTION CO.

vibha associates

PG CONSTRUCTION AND COMPANY

R.D.Builders

M/s Kanha Enterprise

AEGIS INTERNATIONAL