REPAIR TO ROOF SHEET, PLYWOOD,TILE, JOINER, SANITARY PLUMBING ETC AT TANGDHAR AND LT DISTRIBUTION SYSTEM UNDER THE AOR OF GE 874 EWS

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for foundation of poles, stay assembly and laying of XLPE cable as in any type of soil and getting out, complete all as specified and directed.

All as per ser item No 1 above but depth exceeding 1.5 m and not exceeding 3 m.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed.

M&L for sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and directed.

Material and labour for kiln burnt Sub class 'B' bricks laid dry, flat, width wise along the length of cable in trenches after sand cushioning for protection of under ground cable complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in bed of poles and stays complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type C-2 using 40 mm graded crushed stone aggregate as in pole coping and stay assembly complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type D-2 using 40 mm graded crushed stone aggregate in foundation of poles streets and stays complete all as specified and directed.

Supply & Laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles including taking out old unserviceable damaged cables of sizes 16 sq mm, 4 core complete all as specified and directed.

All as per ser item No 10 above but 25 sq mm, 3.5 core

All as per ser item No 10 above but 35 sq mm, 3.5 core

All as per ser item No 10 above but 50 sq mm, 3.5 core

All as per ser item No 10 above but 95 sq mm, 3.5 core

All as per ser item No 10 above but 150 sq mm, 3.5 core

All as per ser item No 10 above but 185 sq mm, 3.5 core

All as per ser item No 10 above but 300 sq mm, 3.5 core

Supply and fix cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrink type, straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE /(ABC), armoured, Aluminium conductor cable of size 10 sqmm to 16 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrink type, straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE /(ABC), armoured, Aluminium conductor cable of size 25 sqmm to 50 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrink type, straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE /(ABC), armoured, Aluminium conductor cable of size 70 sqmm to 120 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrink type, straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE /(ABC), armoured, Aluminium conductor cable of size 150 sqmm to 185 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrink type, straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE /(ABC), armoured, Aluminium conductor cable of size 240 sqmm to 300 sqmm complete all as specified and directed.

M&L for GI pipe ,light grade 40mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed.

M&L for GI pipe ,light grade 50mm dia for road crossing of cable or for cable protection of cable above ground surface complete all as specified and directed.

Taking down old unserviceable indicator lamp and S&F in repair Phase LED indicator lamp R,Y & B complete all as specified and directed.

S & F in replacement steel tubular swaged poles erected truly vertical or planted as strut complete with 300 x300x 6 mm thick mild steel base plate, welded to pole, B-118 final, taper cap, bolts, nuts & screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II. type 410 SP-31 (9.0 metres long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint internally & portion embedded in concrete, making five black & yellow bands at lower portion of pole each 300mm wide alternately, and making pole No. with black paint at suitable height complete all as specified and directed.

M&L for cross arms bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint after preparation of surface, including taking down unserviceable/old cross arms, complete all as specified and directed.

Supply & fixing following type LT, PVC line spacer/separator of 2 wire complete all as specified and directed.

All as per ser item No 30 above but PVC line spacer 3 wire

All as per ser item No 30 above but PVC line spacer 4 wire

M&L in replacement of ACSR conductor of any size and any type including stretching, fixing and binding to insulator on OH line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified. This item includes all consumables (such as binding wire and replacement insulators and cross arms, etc., complete all as specified and directed.

M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 150 mm height, 150 mm dia for 11000 volt grade complete all as specified and directed.

S&F in replacement Disc Type Porcelain , vitreous, white, brown or green insulators for working pressure 11000 volts grade, with bolts, washers and nuts, complete all as specified and directed.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified and directed.

M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 100 mm height, 65 mm dia for 1100 volt grade complete all as specified and directed.

M&L in replacement of Stay assembly for electric pole complete with accessories as shown in electrical plate No 1 of SSR Pt-I and drg using loop type insulator, stay clamps, stay rod of 16 mm dia including stay wire of size 7/3.15 mm complete all as specified and directed. Note:-Excavation, earth work and concrete shall be measured and paid separately.

M&L for servicing of LT Panel indoor/outdoor by Welding ,greasing, tightening of nut bolts, insulation of bus bar with colour code, checking of continuity of internal wiring of panel, Replacing burnt MCCB of capacity 63/100/200/250 Amps, including scrapping old worn out paint from panels and painting with two coats of synthetic enamel paint over a coat of primer with spray painting complete all as specified and directed. . NOTE :- MCCB will be measured and paid separately under respective item.

S&F in replacement of Manual changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 63 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of Manual changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 100 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of Manual changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 125 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of Manual changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 160 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of Manual changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 200 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of Manual changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 630 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of On load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 100 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of On load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 125 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of On load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 160 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement of On load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity from 320 Amp complete all as per existing sample complete all as specified and directed.

S&F in replacement MCCB 125 Amp 4 pole 415 Volt breaking capacity 35 kA.as per sample which is suitable for existing panel complete all as specified and directed.

S&F in replacement MCCB 200 Amp 4 pole 415 Volt breaking capacity 35 kA. as per sample which is suitable for existing panel complete all as specified and directed.

S&F in replacement MCCB 320 Amp 4 pole 415 Volt breaking capacity 35 kA.as per sample which is suitable for existing panel complete all as specified and directed.

Supply and fix in replacement MCCB 400 Amp 4 pole 415 Volt breaking capacity 35 kA. as per sample which is suitable for existing panel complete all as specified and directed.

S&F in replacement MCCB 630 Amp 4 pole 415 Volt breaking capacity 50 kA. as per sample which is suitable for existing panel complete all as specified and directed.

S&F in replacement lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp, 11000 volts grade complete all as specified and directed.

Supply, installation, commissioning and testing switch air break, gang operated with 12 insulator switch triple pole mechanically operated, mounted on insulators and steel frame with mechanism worked from ground level for current rating 400 Amp operating voltage 11 KV outdoor type vertical mounted type complete with locking arrangement, assembly with fuse mount carrier and fuse element of required capacity and isolate suitable for 11 KV including necessary electric connection and 11 KV Fuse (drop out type) of capacity 10 Amps. complete with DO fuses with one number operating rod of 25 mm dia bore grade GI pipe of suitable length worked out from ground level and handle complete including flat iron clamp 50mmx6mm, MS channel of suitable size & length for fixing GOD including nut bolt washers including taking down existing set complete all as specified and directed.

M&L for scraping of old paint from pole and painting to poles, 11 mtr with cross arms, bracing and clamps with one coat of synthetic enamelled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of Yellow and black from foot of pole upto 5 feet each strip of 30 cm height complete all as specified and directed.

All as per description of ser item No 57 here-in-before but for LT pole 9 mtr long and painting strips of yellow & black from foot of pole upto 5 feet each strip of 30 cm height complete all as specified and directed.

Supply, installation in replacement, connecting electrically and esting of street light junction box size 450x250x300mm, pole mounted made out of CRCA sheet 2 mm thick , powder coated having door with magnetic lock complete with bus bar 4 Nos suitable for 3 phase 4 wire supply system, made of aluminium strip of size 20X3mm, one single pole MCB, 240 volts 'C' Curve type, 6 Amps with rupturing cap 10 KA, including fixing arrangement made of MS FI Clamps of requisite size nuts, bolts and washers complete all as specified and directed.

Supply and fixing in replacement GI bracket for fixing of street light fittings bend to shape, made out of 32mm GI pipe light grade upto 1.5m long fixed with and including clamps made from flat iron of size 40x4mm, MS clamps bolt, nuts & washers & two coats of aluminium paint over a coat of red oxide primer, including taking down old unserviceable complete all as specified and directed.

M & L for Multistranded copper conductor heavy duty cable PVC insulated minimum conductor, served with inner sheathing of PVC tape and overall PVC sheathed of size 2.5 sqmm 3 core for street light connection including taking down existing old unserviceable cable and removal from site complete all as specified and directed.

S&F for rigid non-metallic PVC conduit of 20 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. heavy duty wall thickness 2.00mm for street light fittings including taking down old unserviceable complete all as specified. Note- PVC conduit will be fix with suitable MS flat iron clamp including bolts and nuts etc fix on pole complete all as specified and directed.

Supply and fixing in replacement LED Flood light fitting 50 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement LED Flood light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply & Fix in Replacement LED Garden light fitting 10 Watts,IP65 rated inverted pyramid tripod type (as per site requirement) and including driver unit etc and taking down old unserviceable any size/watt of garden light complete all as specified and directed.

Supply & Fix in Replacement LED Decorative Post top lantern light fitting 40 Watts,IP65 protection and including driver unit (as per site requirement) etc and taking down old unserviceable any size/watt of Post top lantern light complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 × 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less' than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Supply and fix in replacement danger sign board made of 1.6 mm thick MS sheet vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed on LT poles with MS Bolts and Clamps, bolts, nuts of approved size for LT, 20x15cm complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 16 Sqmm including taking down old unserviceable cable any type complete all as specified and directed.

Supply and fix in replacement aluminium lugs of size 50 mm sqmm complete all as specified and directed.

Supply and fix in replacement aluminium lugs of size 70 mm sqmm complete all as specified and directed.

Supply and fix in replacement aluminium lugs of size 120 mm sqmm complete all as specified and directed.

Supply and fix in replacement aluminium lugs of size185 mm sqmm complete all as specified and directed.

Supply and fix in replacement aluminium lugs of size 240 mm sqmm complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws complete all as specified and directed.

All as per item No 79 above herein before but plain sheet.

Dismantling wall and ceiling board of any description including cover fillets complete all as specified and directed.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in wall/linings complete all as specified and directed.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in ceiling etc complete all as specified and directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and directed.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as specified and directed.

Dismantling of timber scantlings 40 sq cm and over in sec, in any position, in unframed/framed work complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick plain Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base flooring complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm and n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 sqm. complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm complete all as specified and directed.

Taking down of Shutters of any description n exc 1 sqm each.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each and re-fixing in the same opening after easing and adjusting with existing frame or chowkat complete all as specified and directed.

S&F second class Soft wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints and treating back of chowkhats etc with tar or col black paint complete all as specified and directed.

S&F second class soft wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Plain, framed, panelled shutters thickness 35 mm of second class softwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Aluminium handles 100 mm, cast type, anodised complete all as specified and directed.

S&F Aluminium handles 150 mm, cast type, anodised complete all as specified and directed.

S&F in repairs rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkhat complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic varnish complete all as specified and directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing sown in SSR Part II, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item SSR Part II, 2010 complete all as specified and directed.

S&F Sheet glass 4 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows

S&F Sheet glass 3 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling floor hearth wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M & L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surface such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M & L for glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick colour and design (as approved) set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 10 mm thick cement plaster in CM (1:4) complete all as specified and directed.

S & F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repair Stop/angle valves 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle fancy type chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fancy type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs for 15 mm bore bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule complete all as specified and directed.

S&F in repairs Vitreous China urinal, Full stall type, white including flushing cistern, flush pipe and waste pipe complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and including brackets with waste fittings, brass, chromium plated for glazed ware basin etc with long screwed shanks and fly-nuts, flange end bedded in read lead cement and other end fixed and connection pipe etc including pedestal complete all as specified

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cover including provision of concrete/ white cementing and P or S trap complete all as specified and directed.

S&F in repair vitreous China squatting pan, Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing complete all as specified and directed.

S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard complete all as specified and directed.

S & F in repairs Brass CP wall mixer /WHB Mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S &F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc. complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F 15mm bore steel water tube, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tube, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floor or to wall complete all as specified and directed.

S&F PVC (SWR) junction single T equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) junction single T equal or unequal 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia fixed complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore fixed complete all as specified and directed.

Please Enable Macros to View BoQ information