Loading…
Loading…
Tender Value
₹73.4 L
EMD Value
₹1.5 L
Closing Date
27 Jul 2026, 3:30 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL WORK
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note : Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Defination of Similar Work :- Any work comprising of work of audio, video and conferencing system.
31 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer must satisfy himself that he has the capacity (Men, material and resources) to complete the work within the stipulated period mentioned in NIT from the date of issue of Letter Of Acceptance.
The contractor must abide by and comply the provision of contract labour (Regulation & Abolition) Act, 1970 and Central Rules, 1971.
Tenderer should note that post tender correspondence regarding submission of credential or additional documents in support of credentials/eligibility criteria (i.e. other than those uploaded with the tender offer on IREPS System ) shall not be accepted manually or entertained by Railway. However , Railway administration reserves the rights to seek clarification on the credentials received along with the tender documents and to verify their genuineness for deciding the tender.
The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of e-tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders through the website after the opening of the tender. Note: For more details of General Instruction-Chapter-I for Submission of Bid Security, Cost of Tender Document and opening of e-tender. Tenderers are requested to go through the following documents which are available in upload/View Documents in Home page of IREPS portal for works tenders before submitting the e-tender. 1. General Instruction for E-Tenders on works contract-- Chapter- I 2. Special Condition-General- Chapter-II.
1. The work will be completed within the period of completion as mentioned in the NIT from the date of issue the acceptance letter. 2. The quantity mentioned against the above item is approx & for tendering purpose only, where as payment will be made actual work done. 3. If the tenderer is failure to start to the work within 15 days from the date of acceptance of the tender under Clause-19.2 of GCC-2022 contract may be terminated as per provision of clause of GCC 2022. 4. Trade license/ labour license must be submitted before execution of agreement as per extant rule. 5. In case of any discrepancies in rate and unit between annexure and USSOR 2021 schedule, the rate & unit USSOR 2021 and DSR-2021 schedule will prevail.
Tenderers must follow the Instructions to Tenderers and Conditions of Tender as mentioned in the uploaded Tender Document before participating in this Tender.
Tenderers are requested to go through the Special Condition of Deployment of Qualified Engineers at Work sites by the Contractors & Additional Conditions of this tender which is available in the uploaded Tender Document.
The financial proposal shall be evaluated to determine the lowest bidder. In case, the evaluated financial offers of two or more technically qualified bidders are Lowest and same, then the Bid of the bidder who is having more technical credentials shall be considered as the lowest. If the technical credentials in the evaluation of technical bids of the lowest bidders are also found to be equal, then the bid of the bidder with the higher cumulative annual financial turnover over the last three years and the current financial year shall be considered as the lowest.
All safety measures will be taken by the contractor and no compensation towards any accident whatsoever will be paid by the Railway. Work Instruction for working at height for Works to be followed strictly.
Tenderers are requested to go through the Special Conditions & Additional Special Conditions of this tender which is available in the uploaded Tender Document.
Renovation of Administrative meeting hall to facilitate training session at CLW/ Chittaranjan.
Engg-21-2026-27
Engg-21-2026-27
Open
Works - General
4 Months
Paschim Bardhaman, West Bengal
₹0
₹1.5 L
27 Jul 2026
6 Jul 2026
13 Jul 2026
68 items across 4 schedules · ₹73,40,644.88 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| on wall face unplasticised - PVC moulded for unplasticised Rigid PVC rain water pipes 13592 Type A, including jointing with seal ring : 5382, leaving 10 mm gap for thermal | — | — | — | — | |
| false ceiling at all height including providing work made of special sections, power pressed and galvanized with zinc coating of 120 inclusive) as per IS : 277 and consisting of 25 mm wide x 1.6 mm thick with flanges of at 1200 mm centre to centre, one flange with dash fastener 12.5 mm dia x 50mm long other flange of cleat fixed to the angle mm of required length with nuts & bolts and other end of angle hanger fixed with channels 45x15x0.9 mm running at the spacing to centre, to which the ceiling section 0.5 mm of 80 mm with tapered flanges of 26 mm 10.5 mm, at 450 mm centre to centre, shall perpendicular to G.I. intermediate channel made out of 2.64 mm dia x 230 mm long junction, including fixing perimeter channels high having flanges of 20 mm and 30 mm of ceiling fixed to wall/partition with the help mm centre, with 25mm long dry wall screws including fixing of gypsum board to ceiling channel with the help of dry wall screws of 230 mm c/c, including jointing and finishing tapered and square edges of the board with compound , jointing tapes , finishing with in 3 layers covering upto 150 mm on both two coats of primer suitable for board, all as specification and also including the cost of light fittings, grills, diffusers, cutouts made channels suitably fixed, all complete as specification and direction of the Engineer in the cost of painting with : | — | — | — | — | |
| 1 | edge gypsum moisture resistant board | Sqm | 90 | 1,300.5 | 1,17,045 |
| 2 | plaster of paris putty of 2 mm thickness to prepare the surface even and smooth | Sqm | 112 | 214.3 | 24,001.6 |
| of water thinnable cement primer of approved on wall surface : | — | — | — | — | |
| 3 | cement primer | Sqm | 60 | 64.45 | 3,867 |
| acrylic emulsion paint, having VOC (Volatile ) content less than 50 grams/ litre, of manufacture, including applying additional required, to achieve even shade and colour. | — | — | — | — | |
| 4 | Two coats | Sqm | 185 | 116.05 | 21,469.25 |
| coats with primer of approved brand and low VOC (Volatile Organic Compound ) | — | — | — | — | |
| 5 | gloss/matt finish melamine clear polish on wood color/wooden shade texture with following sequence as detailed below: 1. The surface to be with sand paper 80/120 no. and then with nos. 2. Applying two coats of sealer with allowing sufficient drying time for 1st coat and to dry for 8 to 12 hrs. 3. On drying of sealer with emery cloth of finer grading with ample excess sealer layer and make the surface this wet rubbing, then surface is applied melamine fillers to fill all the small and big Filler coat to be allowed to dry for 4 to 6 hrs on wet rubbing is done this surface is further 12 hrs. 4. On this, 1st coat of melamine polish spray gun using melamine clear polish and required proportion. This 1st coat is allowed then this dry surface is again fine wet rubbed further allowed to dry for 12 hrs. The final applied with compressor pressure spray gun clear polish and melamine thinner mixed in complete as per direction of Engineer-in- to be done in 1 or 2 layers without gap of | Sqm | 12 | 1,156.55 | 13,878.6 |
| DEMOLISHING | — | — | — | — | |
| boardings in lining of walls and partitions, members but including stacking within 50 | — | — | — | — | |
| 6 | mm up to 25 mm | Sqm | 112 | 64.15 | 7,184.8 |
| 7 | Gypsum partitions, doors, windows, fixed ceiling including disposal of unserviceable of serviceable material with in 50 meters Engineer-in-charge. | Sqm | 100 | 46.5 | 4,650 |
| Schedule total | ₹1,92,096.25 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
BidSecurityBankGuaranteeBondFormat.pdf
ATTACHMENT
Tender Document
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
Annexure-VIB-AnnualContractualTurnOverDatafor3-4years.pdf
ATTACHMENT
2018_CE-I_CT_9Date04_06_2018.pdf
ATTACHMENT
RBA-36--2022_1.pdf
ATTACHMENT
2018_02_08RBTrans_PolicyProcessReforms.pdf
ATTACHMENT
Rly_Bd_Letter_Dt.14.05.2024Annexure-V.pdf
ATTACHMENT
Formats.pdf
ATTACHMENT
Engg-21-2026-27RenovationofAdministrativemeetingHalltofacilitatetrainingsessionatCLWChittaranjan.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .