WELCOME MAINT OF OFFRS MD ACCN UNDER AGE BR-II AT AMRTISAR CANTT

Amount

Taking down shutter and removing from site of any description size but exc 1 sqm and n.exc 2 sqm complete all as specified and directed.

Taking down chowkhats or frame without taking of shutter and removing from site exc 1.5sqm but not exceeding 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame (w/o taking off shutters) and removing from site n.exc 1.5sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm & nexc 2sqm each. and refixing in the same opening complete all as specified and directed.

Material and labour PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, roof kerbs or mud stop, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary foRunning metre work complete all as specified and directed.

Material and Labour for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 including demolition of brick and removal complete all as specified and directed.

Material and labour for 12mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. Including takining down cement plaster and removal complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and directed.

Supply and Fixing solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.

Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing complete all as specified and directed

Supply and fixing of factory made Box type steel window made of ERW tube P- section of size 60 mm x 25 mm single rebated, comprises of side hung glazed skelton shutters of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glasses including fittings and fixtures like Handles, Tower Bolts, Stoppers, Cleats, Pintal hinges, holdfasts etc as given below including cutting holes, making good dismentled portion in PCC 1:2:4 type B-1, including a shop coat of red oxide primer as per existing opening complete all as specified and directed :-. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos per leaf. (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf. (e) Cleat 55mm long of hollow square 15mm x 12mm - 02 Nos per leaf. (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf complete all as specified and directed. Note :- MS guard bars, sheet glass, wire mesh and painting shall be measured and paid for seperately

Supply and Fixing in repair factory made mild steel box type ventilator fixed type with glazing bar with mesh & glass including a shop coat of red oxide primer as per existing opening complete all as specified and directed.

Supply and Fixing 30 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.

Supply and Fixing 35 mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of mamber of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description from steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads Complete all as specified and directed.

Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

All as per Srl item No 17 here-in-before but fixed in repairs, complete all as specified and directed.

Supply and fixing 300 mm size, aluminium alloy,anodized sliding door bolt, clip type, and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section fixed with stainless steel screw complete all as specified and directed.

Supply and fixing butt hinges 100mm size medium weight cold rolled mild steel fixed with stainless steel screw complete all as specified and directed.

Supply and fixing 150 mm size aluminium anodized barrel tower bolt of extruded section fixed with stainless steel screw complete all as specified and directed.

Supply and fixing 200 mm size extruded aluminium anodized tower bolt of extruded section complete all as specified and directed.

Supply and Fixing in repair 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded compete all as specified and directed.

Supply and fixing in repairs 150 mm size extruded aluminium anodized handle cast type fixed with stainless steel screw complete all as specified and directed.

Supply and Fixing in repair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc., complete all as specified and directed.

Material & Labour for Preparation of new wooden surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces exceeding 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

Supply and Fixing floor door stopper 125mm length Coated brown aluminium alloy body fixed Complete all as specified and directed.

Supply and fixing 40mm long box type stainless steel hinges spring action , complete all as specified and directed.

Supply and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm complete all as specified and directed.Note:- Net area of front finished surface will be measured.

Supply and Fixing in repair mild steel continuous piano hinges with 30mm width of flap bright finished complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified and directed. Note :- The quoted rates shall be include for necessary excavation and earth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed.

All as per Srl item No 32 here-in-before but 20 mm bore, complete all as specified and directed

Supply and Fixing ing galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor complete all as specified and directed.

Supply and Fixing galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor complete all as specified and directed.

Supply and Fixing in repairs 125mm CP shower rose fancy type with CP aRunning metre complete all as specified and directed.

Supply and Fixing in repair PVC connection 450mm long of 15mm size with PTMT nuts on both sides complete all as specified and directed.

Supply and Fixing in repairs bib tap cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing in repair Angle valve, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed.

Supply and Fixing in repair plastic water closet seat cover coloured closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and Fixing in repair for 15mm bore stop valves, cast copper alloy, concealed type, chromium plated with long shank and cup ,screwed down,handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

Supply and Fixing vitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC P or S trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 including taking down/dismantling old unserviceable WC complete all as specified and directed. Note :- Flush pipe and flushing cistern to be measured and paid separately.

Supply & fixing and removal vitreous china wash down water closet pan (padestal pattern) white with flush pipe for low level flushing cistern including plastic water closet seat white with jet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed in repairs complete all as specified and directed.

Supply and Fixing in repair PVC Mirror bathroom cabinet with shelves fancy type of size 350x450mm including fixing arrangement complete all as specified and directed.

Supplying and fixing white PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, push button type handle including pipe 32mm dia of PVC(Heavy duty) flush pipe including brackets and taking down/dismantling old unserviceable cistern and removal of old retrieved material complete all as specified and directed.

Supplying and fix in repair viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length ilcluding taking out of old WHB & making necessary connections and removal of old retrieved material complete all as specified and directed

Dismantling water tanks Exc 250 Litre & not exceeding 500Litre and Supply and Fixing rotational moulded polythene, triple layers, water storage tank 500 Litre capacity, closed top, cylindrical, hoisted and fixed in position including Supply and Fixing in repair 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete and removal of old retrieved material all as specified and directed

Dismantling water tanks Exc 500 Litre & not exceeding 1000 Litre and Supply and Fixing ing rotational moulded polythene, triple layers, water storage tank 1000 Litre capacity, closed top, cylindrical, hoisted and fixed in position including Supply and Fixing ing 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Supply and Fixing ing 20 mm bore dia gate valve,gun metal with iron wheel head,screwed both ends and fixed complete all as specified and directed.

Supply and Fixing in repairs stainless steel kitchen plate rack size 90cm X 90cm ,25cm deep made of 1mm stainless weight not less than 7.5 kg sheet fixed to wall and removal of old retrieved material complete all as specified and directed.

Supply and Fixing in repair sink with drainage board made of stain less steel 1mm thick with plugs, washers and wastes pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm including two coats of synthetic enamel paint over coat of primer and connecting union to pipe over all minimum size 915mm x460mm bowel size 410mm x 330mm x160mm and removal of old retrieved material complete all as specified and directed.

Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long and removal complete all as specified and directed.

Dismantaling floor hearth or wall tiling incl cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises, complelte all as specified and directed.

Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in cement mortar 1:4 on brick surface complete all as specified and directed.

Supply and Fixing Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in cement mortar1:6. complete all as specified and directed.

Supply and Fixing Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.

Dismantling of PVC/CI pipe of 75/100mm dia fixed with cement joint removal old complete all as specified and directed.

Supply and Fixing PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and Fixing PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm , complete all as specified and directed.

Supply and Fixing PVC (SWR) pipes 110mm dia bend any radius complete all as specified & directed.

Supply and Fixing in repair sheet glass shelf assembly 60 cm long consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminum alloy bracket and CP guard railing with double rail and removal old complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, foRunning metre work and welding of reinforcement if required with wire mesh of eight 1.5 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces incompete including demolation of RCC all as specified and directed.

Material and Labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking platefoRunning metre s and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4.complete all as specified and directed.

Supply and Fixing in repair framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work confo Running metre to Fe 410-0or Fe 310-0 and removal of old retrieved material complete all as specified and directed.

Supply and Fixing in repair CI floor trap( long nose) 75mm bore with grating including Jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) & removal of old retriedved material complete all as specified and directed.

Material and Labour in repair for 19 mm particle board medium density flat pressed single layer type or three layer type with BWR type adhesive fixed with screws to frame work as in shelves complete all as specified and directed. .

Material and Labour in repair for 18 mm Prelaminated particle board, interior grade ,prelaminated one side with decorated choice lamination & other side balacing white lamination fixed with screws to timber fram work as in shutter,complete all as specified and directed.

Supply and Fixing ing light shade vitrified ceramic tiles 10mm thick ( square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm as in floor set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed.

All as per ser item No 69 here-in-before but on vertical surfaces tiles laid over and including rendering 10mm in cmeent mortar 1:3, complete all as specified and directed.

Material and labour for preparation of old decorated,plastered surfaces of walls, pillars cornices by steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots of and applying Two coats of white wash on walls,pillars.cornices etc complete all as specifed and as directed.

Material and labour for preparation of old decorated plastered surfaces and applying two coats of white wash with lime on ceiling surface for even shade complete all as specifed and as directed.

Material and labour for preparation of old decorated plastered surfaces of walls, pillars cornices,scrapping down smoke soot,moulds,moss and efflorescent slats and trading oil and greasy spots and applying one coat of oil bound distemper on wall including preparation with wall care putty as required complete all as specifed and as directed.

Material and labour for preparation of old decorated plastered surfaces of walls, pillars cornices,scrapping down smoke soot,moulds,moss and efflorescent slats and trading oil and greasy spots and applying two coats of oil bound distemper on wall including preparation with wall care putty as required complete all as specifed and as directed.

Material and labour for washing ,rubbing down/complete removal of existing coloured/Textured treatment from old surfaces of walls, pillars cornices and scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and applying Two coats of oil bound distemper over one coat primer complete all as specifed and as directed. (Wall care putty shall be measured and paid for separately)

Material and Labour for 2mm thick birla wall care putty applying on walls,pillars and cornices making the edges smooth complete all as specified and directed.

Preparing old surfaces of wall in interior surface and applying one coat of plastic emulsion paint complete all as specified and directed.

Preparing old surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

Material and Labour for one coat of synthetic enamel paint over old wooden surface including preparation of wooden surface exceeding 10cm width or girth complete all as specified and directed.

Material and Labour for one coat of synthetic enamel paint over old steel surface including preparation of old steel surface exc 10 cm width or girth complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying Two coats of acrylic waterbased premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications,Anti Algal properties in two coats@ 1.79 ltr (undiluted)/10 sq mtr diluted with to be applied(Make ;- ASIAN, BERGER, NEROLAC and DULEX of Ist quality) (b) Cost of scafolding up to 10 m hight of building isdeemed included in quoted rate of this item, complete all as specified and directed.

Supplying and fixing in repairs centre hole mixer for wash hand basin cast copper alloy fance type with capstan head chromium plated screwed down high pressure with or without lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe 15mmdia complete all as specified and directed.

Supplying and fixing in repairs CP wall mixer four way with connecting to existing shower arrangement suitable for 15mm dia bore pipe including removal old complete all as specified and directed.

Supplying and fixing in repair snack guard aluminium strip 30mm wide, 1.5mm thick thick powder coated with rubber rings to be fixed with screws on bottom of existing shutters to guard from snakes/ frogs including removal of old complete all as specified and directed.

Taking down aluminium door shutters of area exc 1 sqm but not exc 4 sqm each and replacement of necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and refixing in the same opening including fixing to floor stopper or door closure complete all as specified and directed.

Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed ( Min. thickness of powder coating 50 micron)

Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron)complete all as specified and directed. (Sheet glass shall be measured and paid for separately)

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed

Material and Labour in repairs for 18mm thick PVC board in cup board shelve as in kitchen and removal old complete all as specified and directed.

Supply and Fixing in repair solid PVC 5mm thick plain colour PVC sheet in strips as in back side of kitchen cabinet and removal old ,complete all as specified and directed.

Material and Labour for 20 mm thick PVC shutter, printed one side with one coting of ultra violet chemical, glossymat finish inc 100% teRunning metre ite/water proof, fireretrandenteco friendly. Weight not less than 12 kg per sqm incl Steel piano hinges, steel catcher,aluminium handle100 mm long ,aluminium hasp & stapple in repair complete all as specified .

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:4 finishing even and smooth without using extra cement including taking down complete all as specified and directed

Supply and Fixing in repairs 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in aluminium door as per specification and drawing, complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bells etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed

Material and Labour for Modular concealed existing point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken teRunning metre inal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using Cement mortar (1:3)complete all as specified and as directed. Note : 1. Switch,socket,regulator, lamp holders, bells etc,shall be measured and paid separately a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way

b). For one three pin socket outlet 5 Amps independent board complete

c) For one three pin 5 Amps socket outlet on the same board with other switches

d) For one light point controlled by two way switch

All a per item No 95 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete.

Material and Labour for Modular surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken teRunning metre inal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) complete all as specified and as directed. Note : 1. Switch,socket,regulator, lamp holders, bells etc,shall be measured and paid separately a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way

b). For one three pin socket outlet 5 Amps independent board complete all as specified and directed

c) For one three pin 5 Amps socket outlet on the same board with other switches, complete all as specified and directed

d) For one light point controlled by two way switch, complete all as specified and directed

All a per item No 100 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete all as specified and directed

Supply and Fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge., complete all as specified and directed

Supply and Fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed.

Supply and Fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and Fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed.

Supply and Fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and Fixing Modular switch bell push switch 6 Amp 1 module complete all as specified and directed.

Supply and Fixing ceiling rose 65X50 mm three Running metre inals complete all as specified and directed.

Supply and Fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed.

Supply and Fixing Ding Dong bell AC 230 Volts complete all as specified and directed .

Supply and Fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and directed.

Supply and Fixing in replacement for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed with the following accessories. (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.

Supply and Fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and Fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and Fixing in replacement MCB single pole 6 to 32 Amps all as specified and directed.

Supply and Fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed

Supply and Fixing ing in replacement 40 to 63 Amps MCB TPN, 415 Volt complete all as specified and directed.

Supply and Fixing in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps complete as specified and directed (for AC and geyser).

Supply and Fixing in repair ,Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan complete all as specified and directed. Note: Making suitable opening for fixing air fan shall be deemed included in the quoted rate of item.

Supply and Fixing in repair , Exhaust fan of size 300mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection complete all as specified and directed. Note: Making suitable opening for fixing exhaust fan shall be deemed included in the quoted rate of item.

Supply and Fixing in replacement LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.

Supply and Fixing in replacement LED decorative Gate ligh/Garden lights 20 watt light fitting with all accessories including making connections by using suitable size of PVC wire any type complete all as specified and as directed.

Supply and Fixing in replacement LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed.

Supply and Fixing in replacement 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 sqmm 2 core cable complete all as specified and directed.

Supply and Fixing in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and Fixing in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit shall be measured as one unit/ one running metre.

Supply and Fixing in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and Fixing in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running meter.

Material and Labour in repairs Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 metre deep below noRunning metre al ground level) with top edge of the plate not less than 1.5 metre below noRunning metre al ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate, complete all as specified and directed.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm including testing complete all as specified and directed.

M/s. M Company (BID ID -3295373)

m/s inder construction co (BID ID -3295522)

BISHAN DASS (BID ID -3295458)

GEE EMM ASSOCIATES (BID ID -3295353)

S S CONSTRUCTION COMPANY (BID ID -3295582)

Sai Construction Co. (BID ID -3295444)

PURI ENGINEERS (BID ID -3295604)