REPAIRS MAINT TO INTERNAL ELECTRIFICATION REPAIRS MAINT SERVICING TO VARIOUS TYPES OF FANS AND GEYSER AND REPAIRS MAINT SERVICING TO COOLING APPLIENCES AT LIKABALI MIL STN UNDER GE 872 EWS

Amount

REPAIRS/MAINT TO INTERNAL ELECTRIFICATIONS

M&L Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets (but excluding Light Fittings of any description), etc, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down/out unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including providing Surface Treatment to match the Existing Treatment/ Finishes on Ground, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accom-modating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE CEILING/ EXHAUST/ FRESH AIR FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE BELL/ BUZZER POINT controlled by One Bell Push on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 6 AMP 5 PIN SOCKET OUTLET POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 6 AMP 5 PIN SOCKET OUTLET POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 16 AMP 3/5 PIN SOCKET OUTLET POINT on INDEPENDENT BOARD, complete all as specified and all as directed.

M&L Sub-main Wiring with 2-Runs of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping will deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured existing PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be included in the Quoted UNIT RATE.

M&L Sub-main Wiring with 2-Runs of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping will deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured existing PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be included in the Quoted UNIT RATE.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping will deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured existing PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be included in the Quoted UNIT RATE.

S&F PVC Casing Capping (ISI Marked) of size 25mm including all Fitting/ Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. including Taking down/ out unserviceable PVC Casing Capping, complete all as specified and as directed.

S&F PVC Casing Capping (ISI Marked) of size 32mm including all Fitting/ Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. including Taking down/ out unserviceable PVC Casing Capping, complete all as specified and as directed.

S&F PVC Rectangular Board/Block of size 100x100x50mm Deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out unserviceable PVC Board/Block, complete all as specified and as directed.

S&F PVC Rectangular Board/Block of size 175x100x50mm Deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out unserviceable PVC Board/Block, complete all as specified and as directed.

S&F PVC Rectangular Board/Block of size 200x150x50mm Deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out unserviceable PVC Board/Block, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Flush Type Single Pole, 1-way, 230/240 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Flush Type Single Pole, 1-way, 230/240 Volt AC and connecting up including Taking down/ out unserviceable Switch Piano, complete all as specified and as directed.

S&F Modular Switch 6 Amp, 1-Module, 230/240 Volt AC and connecting up including Taking down/ out unserviceable Modular Switch, complete all as specified and as directed.

S&F Switch Piano 16 Amp, Flush Type Single Pole, 1-way, 230/240 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Piano 16 Amp, Flush Type Single Pole, 1-way, 230/240 Volt AC and connecting up including Taking down/ out unserviceable Switch Piano, complete all as specified and as directed.

S&F Modular Switch 16 Amp, 1-Module, 230/240 Volt AC and connecting up including Taking down/ out unserviceable Modular Switch, complete all as specified and as directed.

S&F Bell Push 6 Amp, Single Pole, Flush Type 230/240 Volt AC for operating Bell/ Buzzer and connecting up, complete all as specified and as directed.

S&F Bell Push 6 Amp, Single Pole, Flush Type 230/240 Volt AC for operating Bell/ Buzzer and connecting up including Taking down/ out unserviceable Bell Push, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush Type 230/240 Volt AC and connecting up, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush Type 230/240 Volt AC and connecting up including Taking down/ out unserviceable Socket Outlet, complete all as specified and as directed.

S&F Modular Socket 6 Amp, 2-Modules, 2/3 Pin, Combined, 230/240 Volt AC and connecting up including Taking down/ out unserviceable Socket Outlet, complete all as specified and as directed.

S&F Modular Socket 6/16 Amp, 2-Modules, 2/3 Pin, Combined, 230/240 Volt AC and connecting up including Taking down/ out unserviceable Socket Outlet, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp, 3 Pin, 2-in-1, Multi-Plug, Flush Type 230/240 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp, 3 Pin, 2-in-1, Multi-plug, Flush Type 230/240 Volt AC and connecting up including Taking down/ out unserviceable Switch Socket Combination, complete all as specified and as directed.

S&F Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and connecting up, complete all as specified and as directed.

S&F Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and connecting up including Taking down/ out unserviceable Lamp Holder, complete all as specified and as directed.

S&F Ceiling Rose Surface Type Bakelite 65x50mm, 3 Terminal suitable for 230/ 240 Volt AC, 6 Amp and connecting up, complete all as specified and as directed.

S&F Ceiling Rose Surface Type Bakelite 65x50mm, 3 Terminal suitable for 230/ 240 Volt AC, 6 Amp and connecting up including Taking down/ out unserviceable Ceiling Rose, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Dimmar Switch Type 230/240 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Dimmar Switch Type 230/240 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up including Taking down/ out unserviceable Fan Regulator, complete all as specified and as directed.

S&F Call Bell Ding Dong, 230/240 Volt AC, Single Pole and connecting up, complete all as specified and as directed.

S&F Call Bell Ding Dong, 230/240 Volt AC, Single Pole and connecting up including Taking down/ out unserviceable Call Bell, complete all as specified and as directed.

S&F Regal LED Batten with Side Holder suitable for 18 to 22 Watt, 4 Feet long Tube Rod including Taking down/out unserviceable Tube Rod, complete all as specified and as directed.

S&F LED 20 Watt Tube Rod, Ultra Bright (as approved) suitable for T8 Fitting including Taking down/ out unserviceable Tube Rod, complete all as specified and as directed.

S&F LED Wall Mounted Mirror Light Fitting 10 Watt (as approved), Premium, Opal Glass and Integrated Electronic Driver Nickel, 230/240 Volt, etc. complete with all Accessories, connecting up with Twin Core Twisted Flexible Copper Conductor Cable from Ceiling Rose to Light Fitting, Testing including Taking down/ out unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Bulk Head Light Fitting 10 Watt (as approved) with LED Lamp 10 Watt, made out of Polycarbonate, complete with all Accessories and connecting connecting up with Twin Core Twisted Flexible Copper Conductor Cable from Ceiling Rose to Light Fitting, Testing including Taking down/out unserviceable Light Fitting, complete all as specified and as directed. MAKE : HAVELLS, Model: Hexa 10W or equivalent Model in Make : CG/C&S/ HPL

S&F LED ENDURA NEO Surface Down Lighter 15 Watt (as approved), LED Luminaire with Electronic Driver, Connxentrated Light for Homogenous Illumination, complete with all Accessories and connecting up with Twin Core Twisted Flexible Copper Conductor Cable from Ceiling Rose to Light Fitting, Testing including Taking down/out unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Batten 20 Watt, 4 Feet long (as approved) with LED Batten 20 Watt, complete with all Accessories and connecting up with Twin Core Twisted Flexible Copper Conductor Cable from Ceiling Rose to Light Fitting, Testing including Taking down/out unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Cylindro Track/ Focus Light 15 Watt, 230/240 Volt, complete with all Accessories and Pre-wired, connecting up with and including Provision of suitable size Twin Core Twisted Flexible Copper Conductor Cable from Ceiling Rose to Light Fitting including Taking down/ out unserviceable Light Fitting, complete all as specified and as directed.

S&F PLUTO NEO PANEL LED Fitting 34 Watt, High efficiency 2'x2' Recess LED Luminaire with Electronic Driver, Connxentrated Light for Homogenous Illumina -tion with all Accessories, Pre-wired and connecting up with and including Provision of suitable size 3 Core Twisted Flexible Copper Conductor Cable including Taking down/out unserviceable Light Fitting, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Series, 10 kA, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.

S&F MCB 40 Amp, Single Pole, 'C' Series, 10 kA, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole & Neutral, 'C' Series, 10 kA, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.

S&F MCB 40 Amp, Single Pole & Neutral, 'C' Series, 10 kA, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.

S&F MCB 63 Amp, Triple Pole & Neutral, 'C' Series, 16 kA, 415 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.

S&F Factory made Distribution Board Sheet Metal Enclosure SPN, 2-way, 240 Volt, Single Door, Front Openable, fixed Flush with Wall inside the Nitches or Outside on Wall Surface suitable for mounting Isolators & MCB's 240 Volts suitable rated Bus-bar capacity and connecting up including Taking down/out unserviceable DB Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Factory made Distribution Board Sheet Metal Enclosure SPN, 4-way, 240 Volt, Single Door, Front Openable, fixed Flush with Wall inside the Nitches or Outside on Wall Surface suitable for mounting Isolators & MCB's 240 Volts suitable rated Bus-bar capacity and connecting up including Taking down/out unserviceable DB Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Factory made Distribution Board Sheet Metal Enclosure, SPN, 8-way, 240 Volt, Double Doors, Front Openable, fixed Flush with Wall inside the Nitches or Outside on Wall Surface suitable for mounting Isolators & MCB's 240 Volts suitable rated Bus-bar capacity and connecting up including Taking down/out unserviceable DB Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Factory made Vertical Distribution Board Sheet Metal Enclosure, TPN, 4-way, 415 Volt, Single Doors, Front Openable, fixed Flush with Wall inside the Nitches or Outside on Wall Surface suitable for mounting Isolators & MCB's 415 Volts, 200 Amp rated Bus-bar capacity and connecting up including Taking down/out unserviceable DB Sheet Metal Enclosure of any description, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, heavy duty Cable with PVC insulated Stranded Aluminium Conductor Served with an inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC Sheathed, Cross Section 6.0 Sqmm, 2 Core in Service Connections including Taking down unserviceable Service Connection Cable, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, heavy duty Cable with PVC insulated Stranded Aluminium Conductor Served with an inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC Sheathed, Cross Section 10 Sqmm, 2 Core in Service Connections including Taking down unserviceable Service Connection Cable, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/out unserviceable Earthing of any description, complete all as specified and as directed.

REPAIRS/MAINT TO FANS

Taking down unserviceable Ceiling Fan, Exhaust Fan, Wall Mounted Fan, Air Circulator Fan of any Make & Size after disconnecting and removing to AGE E/M Store Yard at LIKABALI for Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Re-hanging the same in Original Position after repaired and providing Electric Connection, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involved to make the Fan completely Functional, even if not notified by the Board of Officers, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Rewinding & Other Parts required to be replaced will be Measured and Paid separately as "S&F"/"M&L" under relevant Items.

S&F Ball Bearing (size as per existing one/ as approved) for Ceiling Fan 1200/1400mm Sweep and Testing including Taking down/out unserviceable Ball Bearing, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF

S&F Condenser 2.5 mfd for Ceiling Fan & Wall Mounted Fan of any Make and Size and Testing including Taking down/out unserviceable Condenser, complete all as specified and as directed. MAKE : AMCAP/ EPCOS/ HAVELLS

S&F Condenser 4.0 mfd for Exhaust Fan/ Air Circulator Fan of any Make and Size and Testing including Taking down/out unserviceable Condenser, complete all as specified and as directed. MAKE : AMCAP/ EPCOS/ HAVELLS

S&F Gun Metal Bush (size as per existing One/ as approved) for Cabin/ Ceiling/ Exhaust Fan of any Make/Model and Size and Testing including Taking down/ out unserviceable Bush, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF

M&L Mild Steel Down Rod 15mm nominal dia and 250mm to 450mm long, heavy duty, duly painted in matching Colour of Fan and Testing including Taking down/out unserviceable Down Rod, complete all as specified and as directed.

S&F Oscilating Mechanism for Wall Fan 400mm Sweep and Testing including Taking down/out unserviceable Oscilating Mechanism, complete all as specified and as directed.

S&F Rubber Bush (Reel type) standard size and type duly fixed with suitable size Mild Steel Bolt, Nuts, etc. and Testing including Taking down/out unserviceable Rubber Bush, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1200mm Sweep from AGE E/M Store Yard at LIKABALI to nearest Workshop, Removing burnt Winding of any Type Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling and Testing including for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1400mm Sweep from AGE E/M Store Yard at LIKABALI to nearest Workshop, Removing burnt Winding of any Type Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling and Testing including for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Exhaust Fan 250/300/350mm Sweep from AGE E/M Store Yard at LIKABALI to nearest Workshop, Removing burnt Winding of any Type Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling and Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Wall/ Cabin Fan 400mm Sweep from AGE E/M Store Yard at LIKABALI to nearest Workshop, Removing burnt Winding of any Type Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling and Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Taking down Ceiling Fan of any Sweep from any Situation after disconnect -ing, Preparing old Painted Surfaces of Fan including Cleaning, Washing, Rubbing and Filling Cavities with Filler, applying One Coat of Synthetic Enamelled Paint (as approved) with Spray Painting Machine and Writing MES No. with Black Paint, Re-hanging the Fan in Original Postion & Re-connecting and Testing, complete all as specified and as directed.

S&F PVC Stranded Copper Conductor Flexible Cable 1.5 Sqmm 3 Core for Electric Connection including Taking down unserviceable Cable, complete all as specified and as directed.

REPAIRS/MAINT TO GEYSERS

M&L Taking down/Lowering Defective Water Heater of any Capacity/ Make/ Type from any Height by disconnecting all Water and Electric Connections, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair Works involves, Repairing/ Replacing of unserviceable Accessories, Removing all Rusted Nuts, Bolts, de-scaling Inner Tank & Inter Connection Assembly, Cleaning thoroughly with Diluted Acid, Brazing/Gas welding of Inter Connection Assembly, Checking of Inner Tank to make Fully Leakeage Proof and Testing the same with Water Filling/Air Pressure, Re-fixing/ Re-mounting the same in Original Position and providing necessary Water/ Electric Connection and and Testing, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Water Heater(Geyser) completely Functional, even if not notified by the Board of Officers, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Parts required to be replaced will be Measured and Paid separately as "S&F" under relevant Items and Quantities are Provisional.

S&F Base Assembly (Inner), Brass Chromium plated complete of any shape and size with Inlet, Outlet, Thermostate Slot, drain plug, Clamp or Bolts to fixing Heating Element as existing Shape suitable for Electric Water Heater 25 Litre capacity of any Make/Model including Taking down/out unserviceable Base Assembly (Inner), complete all as specified and as directed.

S&F Glass Wool (Insulation Materials) superior quality (as approved) suitable for Electric Water Heater 25 Litre capacity of any Make/Model including Taking out unserviceable Glass Wool, complete all as specified and as directed.

S&F Heating Element 1.5 KW 230/240 Volt AC for Electric Water Heater 25 Litre Capacity of any Make/Model and Testing including Taking down/out unserviceable Heating Element, complete all as specified and as directed. MAKE : BAJAJ/ DITZ/ POWER PACK/ THEETA

S&F Heating Element 2.0 KW 230/240 Volt AC for Electric Water Heater 25 Litre Capacity of any Make/Model and Testing including Taking down/out unserviceable Heating Element, complete all as specified and as directed. MAKE : BAJAJ/ DITZ/ POWER PACK/ THEETA

S&F Indication Lamp Rounded type 230/240 Volt suitable for Water Heater (Geyser) of any Capacity/ Make/ Model and Testing including Taking down/out unserviceable Indication Lamp, complete all as specified and as directed.

S&F Pressure Release Valve Dead Weight type for Water Heater (Geyser) of any Capacity/ Make/ Model and Testing including Taking down/out unserviceable Pressure Release Valve, complete all as specified and as directed.

S&F Thermostate Switch with Thermal Setting 40°C to 90°C capacity and Relay 230/240 Volt AC for Electric Water Heater of any Capacity/ Make/ Model and Testing including Taking down/out unserviceable Thermostate Switch, complete all as specified and as directed.

S&F Plug Top 6 Amp, 3 Pin ISI marked and connecting up including Taking down/out unserviceable Plug Top, complete all as specified and as directed.

S&F Plug Top 16 Amp, 3 Pin ISI marked and connecting up including Taking down/out unserviceable Plug Top, complete all as specified and as directed.

M&L Repairs to Water Heater of any capacity and type by Taking out Unserviceable Water Tank (Inner Shell), brazing to leaking Portion or Patching Work as required with using Copper Plate 1.5mm thick including shaping to Original size, complete all as specified and as directed.

S&F Repairs to Outer Body complete with Top & Bottom Cover, Inspection Plate suitable for Electric Water Heater 25 Litre capacity of any Make/Model and applying Two Coats of Synthetic Enamelled Paint (as approved) ove a coat of Red Oxide Zinc Chrome Primer with Spray Painting Machine, complete all as specified and as directed.

S&F PVC Connection 15mm bore (dia) of length 450mm with PTMT Nuts suitable for Cold/Hot Water including Taking down/out unserviceable PVC Connection, complete all as specified and as directed.

S&F PVC Pipe 15mm bore (dia), Heavy Duty for Inlet and Outlet Connections suitable for Water Heater (Geyser) including Taking down/out unserviceable PVC Pipe, complete all as specified and as directed.

S&F Sheet Metal Enclosure, Single Pole with a 2-Pin and Earth Plug and Socket 20 Amp rating with and including 1 No. MCB Single Pole, 20-32 Amp, 240 Volt and Connecting up including Taking down/out unserviceable Sheet Metal Enclosure, complete all as specified and as directed.

REPAIRS/MAINT TO AIR CONDITIONERS

M&L Taking down/ Lowering Defective Split AC 1.5/2.0 TR Capacity of any Make from any Height by disconnecting all Electric Connections, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects & Repair Works involves, Repairing/Replacing of unserviceable Parts, Cleaning thoroughly Condensing Unit to achive Proper Cooling effect, Checking of Electronic Circuit of Machine, Changing of Wiring with proper size PVC insulated Copper Wires, Brazing the Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof, Re-install the Same in Original/ New Position and providing necessary Electric Connection, Testing on Completion, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Split AC 1.5/2.0 TR Capacity Functional, even if not notified by the Board of Officers, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items and the Quantities are Provisional.

M&L Blower Motor with Extended Shaft and Rotary Blade Complete (as per existing One/ as approved), Single Phase, 230/240 Volt, AC to match the Same Model and Capacity for Indoor Unit of Split type AC 1.5/ 2.0 TR Capacity with necessary necessary Connection and Testing including Taking down/ out unserviceable Blower Motor, complete all as specified and as directed. MAKE : BLUE STAR/ CARRIER/ LG/ SAMSUNG/ VIDEOCON

M&L Compressor Sealed Unit, Rotary type (as per existing One/ as approved) to match the Same Model and Capacity for Split AC 1.5 TR Outdoor Unit with All Accessories including necessary Brazing to Stop Leakage and Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : BPL/ CARRIER/ EMERSON/ HITACHI/ KIRLOSKAR/ LG/ TOSHIBA

M&L Compressor Sealed Unit, Rotary type (as per existing One/ as approved) to match the Same Model and Capacity for Split AC 2.0 TR Outdoor Unit with All Accessories including necessary Brazing to Stop Leakage and Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : BPL/ CARRIER/ EMERSON/ HITACHI/ KIRLOSKAR/ LG/ TOSHIBA

M&L Cooling Coil/ Condensing Unit (as per existing One/ as approved) to match the Same Model & Capacity for Split type AC 1.5/ 2.0 TR Capacity with necessary Connection and Testing including Taking down/ out unserviceable Cooling Coil/ Condensing Unit, complete all as specified and as directed.

M&L Fan Motor with Blade (as per existing One/ as approved) to match the Same Model & Capacity for Outdoor Unit of Split type AC 1.5/ 2.0 TR Capacity with necessary Connection and Testing including Taking down/ out unserviceable Fan Motor with Blade, complete all as specified and as directed. MAKE : BLUE STAR/ CARRIER/ LG/ SAMSUNG/ VIDEOCON

M&L Indoor Unit Complete Set (as per existing One/ as approved), 230 Volt to match the Same Model & Capacity for Split type AC 2.0 TR Capacity with necessary Connection and Testing including Taking down/ out unserviceable Indoor Unit, complete all as specified and as directed.

M&L Remote Auto Sensor Unit & RC (as per existing One/ as approved) for Split type AC 1.5/ 2.0 TR and Testing including Taking down/out unserviceable Remote Auto Sensor Unit, complete all as specified and as directed. MAKE : BLUE STAR/ CARRIER/ HITACHI/ LG/ SAMSUNG/ TOSHIBA

M&L Running Capacitor 45/ 50/ 60 mfd (as per existing One/ as approved) 230/240 Volt, 50 Hz for Split type AC 1.5/ 2.0 TR Capacity and providing necessary Connections and Testing including Taking down/ out unserviceable Capacitor, complete all as specified and as directed. MAKE : ANNAPURNA/ KELTRON/ SIEMENS/ USHA

M&L Repairs to Power Circuit (PC Plate) for Split AC 1.5 TR Capacity and Making Functional and Testing, complete all as specified and as directed.

M&L Insulation On and Around Suction and Discharge Copper Piping with 6.0mm thick Flexible Thermo Cool Heat Resistant of best quality (as approved) duly scrapped with sticking Tape and Testing including Removing/ Taking down existing/ demaged Insulations, complete all as specified and as directed.

M&L Complete Servicing Indoor & Outer Unit of Split type AC 1.5/ 2.0 TR Capacity of any Make & Model in Situ by Cleaning including Changing of Air Filter in Indoor Unit and Testing, complete all as specified and as directed. NOTE : Any Minor Items if required on Servicing to make the Split type AC Functional, the same will be provided by the Contractor without any Extra Cost to the Department.

Supply & Charging of Refrigerant F-22 to Split type AC 1.5 TR Capacity after Cleaning of Condenser Unit, Evoporator Unit, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof & Vaccuming and Testing, complete all as specified and as directed.

Supply & Charging of Refrigerant F-22 to Split type AC 2.0 TR Capacity after Cleaning of Condenser Unit, Evoporator Unit, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof & Vaccuming and Testing, complete all as specified and as directed.

M&L Shifting Split type AC 1.5/ 2.0 TR Capacity Outer Unit with All Accessories including necessary Gas Charging, Welding, Brazing to Stop Leakage Vacum Test Pressure, Testing, insisting thick Flexible Thermo Cool and Servicing of Indoor and Outdoor Unit, complete all as specified and as directed.

REPAIRS/MAINT TO REFRIGERATORS

M&L Opening Defective Refrigerator of any Capacity/ Make/Model/ Type, Removal of Blockage by Flushing out, Brazing (as required) and Making the System Fully Leakeage Proof, Replacing unserviceable Compressor & Other Parts and Re-assembling after necessary repaired and Testing, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Refrigerator Functional, even if not notified by JE/ Engineer-in-Charge, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items and the Quantities are Provisional.

M&L Bimetal Switch (as per existing One/ as approved) to match the Same Model & Capacity for Refrigerator of any Capacity/ Make/ Model/ Type and Testing including Taking down/ out unserviceable Bimetal Switch, complete all as specified and as directed. MAKE : GODREJ/ KELVINATOR/ LG/ SAMSUNG/ VIDEOCON/ VOLTAS

M&L Capacitor 1.5/2.0 mfd (as per existing One/ as approved) for Refrigerator Refrigerator of any Capacity/ Make/ Model/ Type and Testing including Taking down/ out unserviceable Capacitor, complete all as specified and as directed. MAKE : GODREJ/ KELVINATOR/ LG/ SAMSUNG/ VIDEOCON/ VOLTAS

M&L Compressor Sealed Unit (as per existing One/ as approved) to match the Same Model & Capacity for Refrigerator of any Capacity/ Make/ Model/ Type and Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : GODREJ/ KELVINATOR/ LG/ SAMSUNG/ VIDEOCON/ VOLTAS

M&L Cooling Coil (as per existing One/ as approved) to match the Same Model & Capacity for Refrigerator of any Capacity/ Make/ Model/ Type and Testing including Taking down/ out unserviceable Cooling Coil, complete all as specified and as directed. MAKE : GODREJ/ KELVINATOR/ LG/ SAMSUNG/ VIDEOCON/ VOLTAS

M&L Fan Motor with Blade for Evoporator Unit (as per existing One/ as approved) to match the Same Model & Capacity for Refrigerator of any Capacity/ Make/ Model/ Type and Testing including Taking down/ out unserviceable Fan Motor, complete all as specified and as directed. MAKE : GODREJ/ KELVINATOR/ LG/ SAMSUNG/ VIDEOCON/ VOLTAS

M&L Over Load Protection Relay (as per existing One/ as approved) suitable for Refrigerator of any Capacity/ Make/ Model/ Type and Testing including Taking down/ out unserviceable Over Load Protection Relay, complete all as specified and and as directed. MAKE : GODREJ/ KELVINATOR/ LG/ SAMSUNG/ VIDEOCON/ VOLTAS

S&F Thermostate Switch (as per existing One/ as approved) to match the Same Model & Capacity for Refrigerator of any Capacity/ Make/ Model/ Type and Testing including Taking down/ out unserviceable Thermostate Switch, complete all as specified and as directed. MAKE : ANNAPURNA/ DENFOS/ INDFOS/ RENTRAL

M&L Complete Servicing Refrigerator of any Capacity/ Make/ Model/ Type in Situ by Cleaning Condenser Unit, Cooling Coil and Internal Parts, and Testing, complete all as specified and as directed. NOTE : Any Minor Items if required on Servicing to make the Refrigerator Functional, the same will be provided by the Contractor without any Extra Cost to the Department.

Supply & Charging of Refrigerant F-22 to Refrigerator of any Capacity/ Make/ Model/ Type after Cleaning of Condenser Unit, Evoporator Unit, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof and Vaccuming and Testing, complete all as specified and as directed.

REPAIRS/MAINT TO WATER COOLERS

M&L Opening Defective Water Cooler of any Capacity/ Make/ Model/ Type for Checking/ Repairing, Removal of Blockage by Flushing Out, Brazing (as required) Suction & Discharge Pipes for Making the System Fully Leakeage Proof, Cleaning thoroughly Cooling Coil to achive Proper Cooling effect, Replacing unserviceable Compressor & Other Parts and Re-assembling after necessary repaired & Testing, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Water Cooler Functional, even if not notified by JE/ Engineer-in-Charge, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items and the Quantities are Provisional.

M&L Blower Motor with Blade, Single Phase, 1325 RPM, 230/240 Volt, 50 Hz (as per existing One/ as approved) for Water Cooler of any description, Providing necessary Connections & Testing including Taking down/ out unserviceable Blower Motor, complete all as specified and as directed.

M&L Compressor Sealed Unit (as per existing One/ as approved), Single Phase for Water Cooler 40/80 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : BLUE STAR/ EMERSON/ HITACHI/ KIRLOSKAR/ TECUMESH/ TOSIBA

M&L Compressor Sealed Unit (as per existing One/ as approved), Single Phase for Water Cooler 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : BLUE STAR/ EMERSON/ HITACHI/ KIRLOSKAR/ TECUMESH/ TOSIBA

M&L Over Load Protector to Compressor Sealed Unit (as per existing One/ as approved) for Water Cooler of any description, Providing necessary Connections and Testing including Taking down/ out unserviceable Over Load Protector, complete all as specified and as directed. MAKE : HITACHI/ SHRIRAM/ TECHEMSHAH

M&L Push Cock 15mm bore (dia) Brass Chromium plated, having Inner or Outer threaded and fitted to Water Cooler of any description including Taking down/ out unserviceable Push Cock, complete all as specified and as directed. MAKE : BAJAJ/ ESCO/ ESSESS/ JAI

M&L PVC Float Valve suitable to fit with Water Cooler of capacity 40 Litre, 40/80 Litre, 60/120 Litre, 150 Litre including Taking down/ out unserviceable Float Valve, complete all as specified and as directed.

M&L Running Capacitor 10 mfd (as per existing One/ as approved) 400/ 440 Volt AC for Water Cooler of any description, Providing necessary Connections & Testing including Taking down/ out unserviceable Running Capacitor, complete all as specified and as directed. MAKE : SARDA/ UNIVERSAL/ USHA

M&L Thermostatic Switch (as per Existing One/ as approved) for Water Cooler of any description, Providing necessary Connections & Testing including Taking down/ out unserviceable Thermostatic Switch, complete all as specified and as directed. MAKE : ANNAPURNA/ DENFOS/ INDFOS/ RENTRAL

M&L Complete Servicing of Water Cooler of any Capacity/ Make/ Type in Situ by Cleaning Condenser Unit, Fan Motor & Blade, Base Plate including Repairs to Storage Tank, complete all as specified and as directed. NOTE : Any Minor Items if required on Servicing to make the Water Cooler Functional, the same will be provided by the Contractor without any Extra Cost to the Department.

Supply & Charging of Refrigerant F-22 to Water Cooler of any Capacity/Make/ Model/ Type after Cleaning of Condenser Unit, Cooling Coil, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof and Vaccuming, and Testing, complete all as specified and as directed.

REPAIRS/MAINT TO DEEP FREEZERS

M&L Opening Defective Deep Freezer 200/400 Litre Capacity of any Make/ Model/Type Removal of Blockage by Flushing Out, Brazing (as required) Suction & Discharge Pipes for Making the System Fully Leakeage Proof, Cleaning thoroughly Cooling Coil to achive Proper Cooling effect, Checking of Electronic Circuit of Machine, Changing of Wiring with proper size PVC insulated Copper Wires, Replacing unserviceable Compressor & Other Parts and Re-assembling after necessary repaired & Testing, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Deep Freezer Functional, even if not notified by JE/ Engineer-in-Charge, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items and the Quantities are Provisional.

M&L Compressor Sealed Unit (as per existing One/ as approved) suitable for Deep Freezer 310/320 Litre Capacity of any Make/ Type Providing necessary Connections & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : EMERSON/ HITACHI/ KIRLOSKAR/ SHRIRAM/ TECHEMSHAH

M&L Fan Motor with Blade, Single Phase, 230 Volt AC, 50 Hz (as per existing One/ as approved) to match the Same Model & Capacity for Deep Freezer 200/400 Litre Capacity of any Make/ Type and Testing including Taking out unserviceable Fan Motor with Blade, complete all as specified and as directed.

S&F Relay (as per existing One/ as approved) to match the Same Model & Capacity for Deep Freezer 200/400 Litre Capacity of any Make/ Type and Testing including Taking down/ out unserviceable Relay, complete all as specified and as directed.

S&F Thermostate Switch (as per existing One/ as approved) tto match the Same Model & Capacity for Deep Freezer 200/400 Litre Capacity of any Make/ Type and Testing including Taking down/ out unserviceable Thermostate Switch, complete all as specified and as directed. MAKE : ANNAPURNA/ DENFOS/ INDFOS/ RENTRAL

M&L Complete Servicing Deep Freezer 200/400 Litre Capacity of any Make/ Type in Situ by Cleaning Condenser Unit, Fan Motor with Blade, Base Plate, etc. Complete Testing for Proper Functioning, achiving Proper Cooling effect including necessary Repairs to Deep Freezer and Testing, complete all as specified and as directed. NOTE : Any Minor Items if required on Servicing to make the Deep Freezer Functional, the same will be provided by the Contractor without any Extra Cost to the Department.

Supply & Charging of Refrigerant F-22 to Deep Freezer 200/400 Litre Capacity of any Make/ Type after Cleaning of Condenser Unit, Evoporator Unit, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof and Vaccuming and Testing, complete all as specified and as directed.

REPAIRS/MAINT TO VOLTAGE STABILIZER

M&L Dismantling Voltage Stabilizer 2.0/ 3.0 KVA Capacity, Single Phase, 240 Volt AC, Repairing as required, Replacing burnt Transformer Copper wounded, Electronic Circuit, Relays, Indicator Light, Voltmeter, Display, Switch & Socket, etc. to provide Correct Stabilised 130-240 Voltage, Re-assembling the Voltage Stabilizer after Repaired/ Replacement, Re-installed & Testing, complete all as specified and as directed. NOTE : Cost of All Materials & Labour Elements required for Making the Stabilizer Functional, will deem to be included in the Quoted Unit Rate.

M&L Dismantling Voltage Stabilizer 4.0/ 5.0 KVA Capacity, Single Phase, 240 Volt AC, Repairing as required, Replacing burnt Transformer Copper wounded, Electronic Circuit, Relays, Indicator Light, Voltmeter, Display, Switch & Socket, etc. to provide Correct Stabilised 130-240 Voltage, Re-assembling the Voltage Stabilizer after Repaired/ Replacement, Re-installed & Testing, complete all as specified and as directed. NOTE : Cost of All Materials & Labour Elements required for Making the Stabilizer Functional, will deem to be included in the Quoted Unit Rate.

ms singh construction