PROVN OF BOUNDARY WALL WITH CONCERTINA WIRE IN CIPH WING TRG AREA AT MCTE UNDER GE(MCTE) MHOW

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil all as specified and directed

Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in any type of soil, complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in soft /disintegrated rock, complete all as specified and as directed.

M&L, for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, mass concrete etc complete all as specified and as directed.

M&L, for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregates as in foundation, including raft, footings foundation beams, plinth beams, bases for columns, basement slabs and like that complete all as specified and as directed.

All as per Sl. Item No. 5.00 above but as in columns.

All as per Sl. Item No. 5.00 above but as in beams.

Use and waste formwork to side of concrete foundation, footings bases of columns, sides and soffits of plinth beams for rough finished flat surfaces complete all as specified and as directed.

All as per Sl. Item No. 8.00 above but as to side of columns.

All as per Sl. Item No. 8.00 above but as to sides and soffits of beams.

M&L, for TMT bars 10mm dia and over dia cut to length, bent to shape required, including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 9mm dia or securing with clips complete all as specified and directed.

All as per sl. Item No. 11.00 above but for 5 to 10mm dia bars as in stirrups, spacers and like complete all as specified and as directed.

M&L for brick work built in cement mortar (1:6) using fly ash bricks straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L, for PCC 1:3:6 type c1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and as directed.

M&L, for rendering in CM 1:6, 15mm thick on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L,for applying two coats cement base paints over one coat of alkali resistant priming paint on newly plastered wall surfaces including preparation of surface complete all as specified and as directed.

Supplying and fixing Mild steel angle iron work as in struts and posts in fencing including cutting tops to shape as directed, drill holes, notching for wire, etc flat iron fillets (for securing wire mesh and wire any type) including all necessary drilling, bolting or rivetting and embedding in concrete and screwing etc, and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L, for painting to new steel and iron surfaces of exc. 10cm wide or girth by two coats of synthetic enamel paints over a coat of red oxide primer including preparation complete all as specified and as directed.

Supplying and fixing of galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be meassured ) complete all as specified and as directed.

supplying and fixing concertina coil fencing with punched tape concertina coil 450 mm dia wire of short profile with HTGS spring core wire (2.5 mm thick) wire of high tensile strength of 165 kg/sqmm ( minimum) with tape ( 0.5 mm thick) confirming to IS 4454 part 1, 10 metre openable length (total length 90m), having 50 nos rounds per 6 metre length, upto 4m height of wall with existing angle iron'Y'shaped placed 2.1m or 3.00m apart stretched ,studtied with G.I .staples and G.I. clip horizontal ,including necessary wire tied to angle iron, all complete all as specified and directed. Note:- (1) cost of M.S. angle, C.C. blocks shall be measured and paid separately. (2) Test certificate of concertina coil shall be submitted for approval of GE.

Returning, filling in soil, including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removal excavated material to a distance not exceeding 50 M and depositing where directed at a level n. exc. 1.5 m above starting point as in soils complete all as specified and as directed.

Supplying and Fixing of PVC (SWR) single sockted 110 mm bore of pipes as in weep holes of compound wall complete all as specified and directed

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Dismantling of Old paver block 60 mm thick of any description laid in dry as in floors complete all as specified and direced.

Refixing of 60mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-35Grade with grey cement and pigment over sand filling complete all as directed.( Cost of Sand will be measured and paid separately) Note:- old serviceable paver block obtained in dismantling under item no. 25.00 above shall be used under this item.

M&L for Sand filling under floors or in foundations including wateringand consolidation complete all as specified and directed

Dismantling posts or struts ( steel ) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified and directed

Dismantling fencing wire mesh,any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Chitragupta Construction

M/S Sunshine Construction

M/s Gupta Constructions

R. S. JAIN AND SONS

M/s Himgiri construction

Goyal Construction

M/S Umashanker Mishra