DAY TO DAY PETTY REPAIR TO MISC BR ITEMS IN VARIOUS BLDGS AT DEF COLONY, WED, NSD MANKHURD, BCF AND NSD SEWRI TS MAHUL AND REPAIRS AND CLEANING OF SEWAGE LINE , MANHOLE, SEPTIC TANK AT SPDC COLONY, WED AND NSD MANKHURD UNDER GE (NW) MANKHURD

Amount

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in hard/dense soil complete all as specified and as directed

All as per item No 1.00 above but exc 1.5 Mtr but n.exc 3.00 Mtr and getting out in hard/dense soil complete all as specified and directed

M&L for Concrete bed to drain pipes in cement concrete 1:3:6 typeC-1 using 20 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed

All as per item 3.00 above but 100mm bore pipe complete all as specified and directed.

M&L Salt Glazed Stone Ware drain pipe, grade ‘A’ 150 mm bore laid in trenches and jointed complete all as specified and as directed.

All as per item 5.00 above but 100mm bore pipe complete all as specified and directed.

M&L reinforced concrete pipes, class NP - 2, 200 mm bore, laid in trenches and jointed complete with collars Complete all as specified and directed.

Returning, filling including spreading, leveling watering and well ramming in layers n.exc 25cm in soil complete all as specified and directed

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

Demolition and breaking up 150/200mm dia drain pipe (SGSW,AC or RCC)set in cement mortar and taking out of trenches if required complete all as specified and directed

All as per item 10.00 above but 100mm dia drain pipe complete all as specified and directed.

Labour for cleaning /clearing of blockage of gully traps, floor traps, vertical and horizontal soils/ waste pipe of different dia and sewage lines( PVC/SGSW/ CI/RCC of any dia) except cleaning of manholes including opening inspection eye door of bend/ branch pieces, rodding till smooth flow and refixing of bend door after cleaning works complete all as specified and directed for SPDC, NSD, WED of Mankhurd area under GE (NW) Mankhurd 1. The labour will report daily at 0845 hrs on all working days including Sundays and holidays at online complaint cell centre and attend complaints till 1645 hrs given by Engr -In- Charge . Complaints needs to be cleared within 24 hrs after receiving the complaints . The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc) scaffolding ladders any other materials required to clear the blockages at the site without any extra cost .Labour for cleaning of sludge from sewage lines (any dia) to manhole is included in quoted rates. In case any labour does not report to Engineer In Charge for the whole day or found missing more than half an hour on any day, Panel recovery @ RS.860/- per head per day shall be made proportionally from contractor's dues. 2. The above item includes conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints including removal of sludge from the site outside MOD land to a distance not exc 5km (The department shall not be liable to provide any kind/form of transportation to the labour). 3. Registers of labour attendance and complaints shall be maintained by contractor at their own cost,which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor's representative, JE(civil) and Engineer in charge.

Cleaning manhole of size n.exc 1.50 Sqm by taking out sludge in semi liquid/solid stage (incl. all water etc) from inside of manhole of depth not exceeding 1.5 m and removing the sludge to a distance not exceeding 50m depositing in trenches including supply and sprinkling bleaching powder and covering sludge with earth to a thickness not less than 30 cm including all earth work, returning filling, removal of surplus soil & necessary temporary cleaning and necessary safety measures such as gas mask, use of safety belt etc complete all as specified and directed.

Opening cover of manhole exc 1.5 m depth, dewatering and pumping out night sludge etc from septic tank by mechanical means and removing sludge outside MD land and cleaning the septic tank as per BMC rules and placing the cover in original position taking all precautionary and safety measures etc complete all as specified and directed. Note: All T&P and transportation for carrying sludge shall be provided by the contractor at their own cost.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing & precast concrete articles complete all as specified and directed

M & L for brick work with subclass 'B' bricks straight or curved on plan exceeding 6mtr mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description from concrete surface or brick or stone walls including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed. Note for item No 17 to 19 : The rate is inclusive of scaffolding and necessary safety arrangement and work at any height.

M&L for 12mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surfaces of even and smooth, complete all as specified and directed, Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M&L for 20mm (12+8mm) thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surfaces of even and smooth, complete all as specified and directed, Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M&L for 5mm thick polymer modified ready mix cement based plaster on the ceiling surfaces including finishing the surfaces of even and smooth, complete all as specified and directed, Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M & L for cement concrete 1:2:4 , type B-1 (using 20mm graded stone aggregate) as in benching, coping, bed block for hold fast including necessary form work etc complete all as specified and directed

M&L Pre-cast cement concrete cover slab for manhole and drain cover in plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces complete all as specified and as directed. Noted : Reinforcement shall be measured and paid separetly.

S & F for TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

M&L for plain cement concrete 1:2:4 (type B1), using 20mm graded stone aggregates mixed with water proofing compound @3% by weight of cement for fixing of nahani or floor traps, bedding in manholes, sunken floor complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately

Supply only intergal water proofing compound. (ISI marked).

M&L for cast iron 75 mm dia of out let kitchen/Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 including taking down the old one etc complete all as specified and directed.

Demolition of cement concrete of any description or in any position (below or above ground level) etc complete all as specified and directed

M & L for 50mm thick cement concrete 1:3:6, type C -1 (40mm graded aggregate) as in plinth protection and PCC path, finished the suface even & smooth without using extra cement including necessary form work finishing exposed edges fair complete all as specified.

M & L for PCC 1:4:8 type D2 using 40 mm graded aggregate as in foundation, filling and mass concrete etc complete all as specified and directed

Dismantling stone slab and tiles of any description or thickness in floors/dados laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L screed bed or bedding layer 15 mm thick in CM (1:6) for laying floor finishes to recive tiles complete all as specified and directed

M&L for rendering 10mm thick in cement mortar 1:4 to receive wall tiles complete all as specified and directed

M&L for coloured Glazed ceramic tiles 300 x 200mm x 7mm thick as in walls etc set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and directed.

M&L for coloured non skid ceramic tiles 300 x 300mm x 6 to 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Removal of plant growth from wall/roof projection or along the soil /rain water down pipe at any level by injection with chemical Glyphospate solution (410 concentration) of 20 mm or till rufuse by cutting or injection in stem of plants or roots at 30mm including scafolding upto any ht. complete all as specified and directed

M&L for cement concrete type E-2,1:5:10 (using 40 mm graded aggregate) as in sunken portion of toilet and bathroom complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces finishing even and smooth without using extra cement on sunken portion of toilet and bathroom with 3 % WPC complete all as specified and directed. Note : WPC shall be measured and paid seperately

M&L for applying evenly a tack coat of industrial bitumen 85/25 @1.20kg/sqm including cleaing the surfaces over newly plastered surfaces of sunken portions complete all as specified and directed

S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding including taking out of old lime concrete bedding, unserviceable connections etc and connecting up new complete all as specified and directed

M&L for preparation of new plastered surfaces on walls and applying three coat of white wash complete all as specified.

All as per item No 40.00 above but on ceiling complete all as specified.

Petty repairs to wooden joinery / PVC doors/aluminium doors & windows works such as Resecuring or easing and adjusting of doors & windows kitchen cabinets in any size, tower bolt, handle, hinges, aldrop bolt door stopper of any size or any other builder hardware, refixing hinges etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engineer In charge. Note item No 42.00 and 43.00 : 1. Rep of contractor will collect details of complaint from departmant. The contractor will be alloted complaint on daily basis and sufficient resources will be deployed by him/her for completion of day to day comaplaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit suitable penalties @ RS.860/- per head per day shall be made proportionally from contractor's dues. 2. A detailed log of complaints with completion/ non-completion remarks from users/MES will be maintained by the contractor and same will be updated on daily basis in consulatation with Engr-in-Charge or JE detailed by him. 3. The contractor will make suitable arrangment for emergent complaints and will notify auth rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard. 4. The quoted rate deems to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered SPDC, WED, BCF, TS Mahul and NSD Sewri under GE(NW) Mankhurd. 5. The contractor will maintain suitable inventories and range of spares required to meet the complaints as same will be reviewed peridically by Engr-in-charge to streamline complaints disposal system. Note : Replacement of builders hardware if required shall be measured and paid separately as supply only. Note : Repair of a door and its all fittings will be considered as one job for a particular docket No

All as per item No 42.00 above but petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers stop cocks by tightening and providing spindle,washer repairs to float valves, low/high leveled cistern or any other plumbing fittings, sanitary fitting, PVC connection tightening etc to the satisfaction of user as assigned by the Engineer In Charge.

M & L preparing new surfaces of walls applying two coat of oil bound distemper over one coat of primer complete all as specified & directed

M & L for preparation of new plastered surfaces incl necessary scaffolding and applying two coats 100% antifungal of acrylic exterior emulsion paint over a coat of primer complete all as specified

Supply only stainless steel butt hinges, 100mm, medium weight complete all as specified and directed

Supply only stainless steel butt hinges, 75mm, medium weight complete all as specified and directed

Supply only aluminium, anodised, barrel tower bolts of extruded section of size 200mm complete all as specified and directed.

Supply only aluminium, anodised, barrel tower bolts of extruded section of size 100mm complete all as specified and directed.

Supply only extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed.

Supply only floor door stopper aluminium body over length of cover plate 140 mm and anodised with hard drawn steel spring fixed in floor

Supply only new locking arrangement for aluminium windows complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames), exc 1.50 sqm but not exc 4.0 sqm each complete as directed

Taking down shutters of any description, not exc 1 Sqm each complete all as specified and directed

Taking down shutters of any description, exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed

M&L for IInd class Hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and directed.

S & F, IInd class hardwood 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 2nd class hardwood, glazed and skelton shutter, 35mm thick, open rebated and prepared to receive glass, gauze etc, divided into square with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plane, chamfered or rounded, fitted with cut and mitered bead for securing glass, gauze etc, size of member of shutters as specified in SSR Part -I, section 8, class 8.24(a) (Door shutter), supplied and fitted to chowkats all as specified and directed.

S & F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed

S & F , in repairs, IInd class Hard wood plain fillets squares, rectangular or triangular in section, wrought, secured with screws, sectional area exc 13 Sqcm and not exc 25 Sqcm complete all as specified and directed.

M&L for 18/19 mm thick plywood grade BWR, type BB, fixed with screws to timber frame work including 6 mm thick lipping complete all as specified and directed.

S& F solid PVC door frame size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS etc, complete all as specified and directed.

M & L for 20 to 25mm machine cut, polished kota stone slab, in single piece, in window cill, tread and riser of steps, landing , skirting, dado and pillar and similar work, laid over and including backing coat, in CM 1:4, 15 mm thick, jointed with grey cement slurry mixed with pigment to match the shade of the slab including taking down/dismantling old one complete all as specified and as directed

M & L for 20 to 25mm machine cut, polished cudappah stone slab, , in window cill, kitchen platform and similar work, laid over and including backing coat, in CM 1:6, 15 mm thick, jointed with grey cement slurry mixed with pigment to match the shade of the slab including taking down/dismantling old one complete all as specified and as directed

Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and directed

Supply only 4.80mm thick glass ordinary quality plain with including wooden/rubber beading or gasket for aluminium section complete all as specified.

Supply only stainless steel alloy wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

S&F bands, straps supports or stay heavy for large gates, hook and pintle hinges clamps, hold fasts, wall tiles, hooks for hanging fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials steel and iron work, new or old of any description and girth, not otherwise described and treating ends of posts, back of chowkat etc with tar or coal tar black paint, area tarred exc 0.10 sqm but not exc 0.50 sqm each complete all as specified and directed

Ditto all as per item No 71.00 herein above but treating small articles such as stopper, covers, hold fast ends, posts back etc, not exc 0.10 sqm each complete all as specified and directed

Hacking out old brocken glass (any thickness, size, quality or description) from wooden / steel frame or stone, concrete or brick surrounding, glazed with putty or fixed with beads. Note : The rate includes for the removal of shutter from the frame and refixing the same after fixing of glass.

S&F for 4.80mm thick glass ordinary quality plain with including wooden/rubber beading or gasket for aluminium section complete all as specified

S &F, in repairs, aluminium alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with in wooden, aluminiuum windows, doors etc,and fixing of teak wooden beading complete all as specified and as directed. Note :- 1. The rate includes for removal of shutter from the frame for aluminium windows and refixing the same after fixing of wiremesh alongwith aluminium patti. 2. The rate includes for removal of beading from the shutter and refixing the same after fixing wiremesh in wooden door/windows.

Supply and fix aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 250 mm fixed at any position all as specified and directed.

S&F 100 mm long stainless steel butt hinges fixed with stainless screw complete all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified and directed.

S&F aluminum anodised barrel tower bolts of extruded section of size 200 mm length complete all as specified and directed.

S&F in repair for 20mm dia fancy type chromium plated curtain rods complete all as specified and directed

S&F in repair for 20mm dia fancy type chromium plated curtain rod brackets complete all as specified and directed

M&L for joint filling of tiles using epoxy grout , after raking out joints , cleaning old joint filling complete all as specified and directed. Make Fosroc, Krishna Conchem, Pidilite, STP.

Supply only CP bib tap 15mm bore cast copper alloy screwed for iron pipe or for unions and fixed complete all as specified and directed.

Supply only CP pillar taps 15mm bore., cast copper alloy, complete all as specified and directed.

Supply only 15 mm bore Stop valves, cast copper alloy screwed pressure, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

Supply only waste coupling of 32 mm bore brass, chromium plated for glazed ware wash basin etc complete all as specified and directed..

Supply only waste coupling of 75/100 mm bore brass , chromium plated for glazed ware for sink etc complete all as specified and directed..

Supply only waste pipe for WHB/ sink 32mm bore fixed to wash hand basin/sinks coupling length pipe 0.90 mtrs each complete all as specified and directed..

Supply only 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed.

Supply only stainless steel grating in ground shape 100mm dia complete all as specified and directed.

-ditto- all as per item No 90.00 above but with hole complete all as specified and directed.

Supply only plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed..

S&F in repair low density polyethene pipes (LDPE) 32mm dia of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc.

Supply only chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed.

Supply only flush tank float valve 15 mm in size complete all as specified and directed.

Supply only flush tank handle complete all as specified and directed.

Supply only washer for taps, flush tank complete all as specified and directed.

Taking down 15 mm bore GI tubing and connections including fittings, cleaning for refixing complete all as specified and directed.

Taking down 20 mm bore GI tubing and connections including fittings, cleaning for refixing complete all as specified and directed.

Supply & fixing 20mm CPVC pipes UV stable,leak proof, tough ,rigid , conforming to IS:15778 of SDR 11 standard., medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 40mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25 mm complete all as specified and directed.

Supply & fixing 40 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Supply & fixing 25 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 20mm bore complete all as specified and directed.

S&F in repairs 75 mm bore PVC SWR bends (any radius) with access door complete all as specified and directed

S&F in repairs 75 mm bore PVC SWR bends (any radius) without access door complete all as specified and directed

S&F in repairs 110 mm bore PVC SWR bends (any radius) with access door complete all as specified and directed

S&F in repairs 110 mm bore PVC SWR bends (any radius) without access door complete all as specified and directed

S&F in repairs 75 mm bore PVC (SWR) branch piece, double (Double 'Y') equal or unequal and fixed complete all as specified and directed

S&F in repairs 110 mm bore PVC (SWR) branch piece, double (Single 'Y') equal or unequal and fixed complete all as specified and directed

Dismantling of cast iron or reinforced / PVC concrete pipes any dia , including fittings , taking out of trenches, wall and flooring , if required all as specifed and directed.

S&F 75 mm bore uPVC (SWR) soil, waste, ventilating rain water pipe Type 'A', single socketed (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc including taking down existing SWR pipes (including fittings) of any description etc complete all as specified and directed.

S&F 110 mm bore uPVC (SWR) soil, waste, ventilating rain water pipe Type 'A', single socketed (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc including taking down existing SWR pipes (including fittings) of any description etc complete all as specified and directed.

S&F uPVC vent cowl 110mm bore with and including rubber ring joints, complete all as specified and directed.

S&F uPVC vent cowl 75 mm bore with and including rubber ring joints, complete all as specified and directed.

Removing/ taking down of existing roof treatment of any thickness and in any position including cement plaster, clearing the surfaces of roof and exposing the top surface of RCC slab and removing debries outside MD Land, complete all as specified and directed.

M & L for APP modified roof treatment over roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160 gm/ Sq mtr using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20 Degree Celcius (x) Dimentional stability % change = Maximum 1%. (d) Over the membrane provided a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/ Sqm as prescribed by manufacturer.

Ditto all as per item No 118.00 above but in patches , complete all as specified and directed.

Chipping, removing carefully loose/ damaged concrete (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1. Hard concrete shall not be removed by force Note : 2. Item No.120.00 will not be applicable for the locations/areas where item No. 17.00 is applicable.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. Note:- Mode of measurement: superficial area of concrete will be measured.

M&L for epoxy bond coat of make Fosroc (NITOBOND-EP) or epoxy bonding agent of Dr Fixit or equivalent of M/s Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush applciaton, complete all as specified and directed.

M&L building up the profile of structural members using polymer modified mortar of Krishna Conchem (Molith PMM) or polymer mortar HB of Dr Fixit while the bonding agent is sticking upto 40 mm thickness (of 20x20 mm each in 2 layers) including levelling ,profiling etc complete all as specified and directed.

M& L for preparation surfaces of new wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Suply and fix stainless steel butt hinges, 100mm, medium weight by welding to steel chowkhats including removing the old one complete all as specified and directed

S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

S & F in repairs aluminium anodised grill DG-104, 10 mm dia of extruded aluminium section of suitable size and frame including fixing with U clip or F section beading complete with all fitting and fixture and drilling required in RCC section in rectangular or arch type balcony opening of the building complete all as specified and as directed.

S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed..

S&F wash hand basin, vitreous China, white, flat back type, of size 550x400mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection, waste pipe key with brass union complete all as specified and directed by the Engineer-in-charge

S&F PVC flushing tank, 10litres capacity, syphonic action type, high level, valveless, with PVC inlet ball valve, 40mm bore PVC flush pipe, float, and suitable size MS brackets, PVC connection and brass unions including taking down of unserviceable / old CI / PVC flushing cistern complete all as specified and directed

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete iincluding demolition of old cudappah sink/old sink all as specified and as directed.

Taking down rolling shutters of any size and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring worm gear, lock plate etc as required, greasing, oiling, servicing for smooth functioning of all parts complete all as specified and directed. Note: Lath strips, bottom rail, spring,gears etc. will be measured and paid seperately as supply only

Supply only MS 75mm wide lath strips 1mm thick for rolling shutter including mild steel clips at either ends duly painted with two coats of synthetic enamel paint (shades to match with the existing) over a shop coat of zonc chrome red oxide primer complete all as specified and directed.

S&F in repair Health faucet with 1 mtr tube & hook complete all as specified and directed.

S&F in repairs two way Bib cock long body with wall flange fitted by 15mm bore complete all as specified and as directed

Taking down aluminium windows,chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each.incl taking down deco grill and refixing the same after cleaning, repairing, changing of locks,rubber beading, rollers etc

Ditto all as per item No 137.00 above but exc 1.5 sqm and n. exc 4 sqm

Cleaning, greasing, oiling and servicing for smooth functioning of all parts of rolling, shutters of any size including gear box etc as required including scafolding and other safety measurements etc complete all as specified and directed.

Supply only mild steel spring made out of 6 mm to 11 mm dia high tension steel wire conforming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working complete all as specified and directed (dia of spring 100 mm to 150 mm )

Supply only worm gear made out of mild steel suitable for rolling shutter mentioned in Item No 133.00

S&F in repairs 1 mm thick top cover galvanised iron sheet including one shop coat of red oxide primer and two coats of synthetic enamel paint to match with the existing etc complete all as specified and directed.

Supply only mild steel bottom rail with lock plate and two handles 150 mm wide and 3 mm thick including necessary locking arrangement on both sides and painting to bottom rail with and including two coat of red oxide primer complete all as specified and directed.

S&F in repair ball bearing for rolling shutters etc complete all as specified and directed.

M&L for preparation of old painted steel surface of any description and applying one coat of aluminium paint complete all as specified and directed.

M&L Preparing old plastered surfaces after complete removal of old treatment and applying two coats of oil bound distemper over a coat of 3 mm thick wall care putty on plastered and other services,preparatory to distempering on walls. Note : The rate of above item is inclusive of all patch work repair with 3mm putty where ever required at site.

M&L preparation of old surfaces of wall (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified and directed.

Ditto all as per item No 147.00 but over ceiling all as specified and directed

S&F 15mm dia stop valves, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions or for brass ferrule, as fixed in repairs complete all as specified and directed

S&F 15mm dia bib taps, cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule, as fixed in repairs complete all as specified and directed

M& L for preparation surfaces of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surface of any description and applying one coat of synthetic enamel paint complete all as specified and directed. Note : A sum of Rs 21,365.00 towards sch of credit shall be deducted to arrive the contract sum.

GAJANAN SALES CORPORATION

M/s Mohd Altaf Hanif Qureshi

PRABHU ASSOCIATES