SPECIAL REPAIR TO CERTAIN AREA OF UNIT BUILDING AT AMOGHBAAN AT AF STN AGRA

Amount

Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed

Dismantling wall and ceiling boards ( fibre, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover filletts complete all as specified and directed.

Providing & fixing false ceiling at any heights with GRG (Glass Fibre with semi with fully Reinforced Gypsum) false ceiling tiles of perforated 12mm thickness of Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 10mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners(Sleek) of size 15 x 32 mm of length 3000mm,cross-T(sleek) of size 15x 32mm of length 1200mm and secondary intermediate cross-T(sleek) of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1500 mm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in?Charge.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed .

M&L for 100 mm thick PCC(1:4:8) type D2 using 40 mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in bed blocks, coping, road side bed plates etc and similar articles including necessary form work etc complete all as specified and directed.

M&L 20mm thick Granite (of any type) tiles machine cut, in skirting,dado, floor laid over cement screed 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L for machine cut kota stone slab 18-20 mm thick as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone over and including 15mm thick screed bed in CM ( 1:6) including grinding and mirror polishing complete all as specified and directed.

M&L for 100 mm thick PCC(1:3:6) type C2 using 40 mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for 40 mm thick PCC(1:2:4) type B0 using 12.5 mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall including fixing accessories complete all as specified and directed.

S&F in repairs PVC (SWR) bends of 110mm bore of any radius complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal suitable for 110mm bore of pipes complete all as specified and directed.

S&F in repairs 25 mm dia Stainless steel drapery rod incl bracket/ holder for drapery rod fixed with screws complete all as specified and as directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (die cast), heavy duty with pivot, aluminium body, ISI marked, complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified tiles light shade(1st quality/premium quality) 8-10 mm thick (square/rectangular) area of each tile n.exc 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles as in floor over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic coloured tiles joint free of size 350x250 x 7 /450x350x7mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including rendering 10mm thick plastering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc if any required at site for entire completion of work all as specified and directed .

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 200ml per 50kg bag of cement or as per manufacturer's instructions , finished the surface fair and even complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc if any required at site for entire completion of work all as specified. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two or more coat of weather proof exterior emulsion paint in normal pattern by diluting of water & over a coat of 1mm thick wall putty(as per manufacturer direction) complete all as specified and directed.

M&L for Preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion on wall by using mechanical device over a coat of 1mm thick wall care putty all as specified and directed.

M&L for preparation of new plastered surface of ceiling applying three coat of white wash by using mechanical device complete all as specified and as directed

Supply only liquid water proofing compound complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the fames) complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the fames) complete all as specified and directed.

S&F windows/ventilators fabricated from 0.6mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS- 513 'D' quality) galvanised as per IS-277 with Zinc of 120 gm/sqm. Windows/ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0 mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mm x 12mm flat iron with 10mm square bar MS grill and all fitting, fixtures accessories complete all as specified and shown in drawing no CEAF/STD-191/2014 Sheet 1/2 & 2/2 (4000 Series) NOTE: (i) Glazed shutter with 4.00 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per above mentioned drawing is deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacturer of window only. (iii) making good of jambs in CM (1:4) and OBD with putty complete.

Taking out / dismantling of mud or existing roof treatment of, any thickness, including plastering and leaping and tiling/ pedding of any description including disposal of removed/ demolished soil/material exc 1.5 km but n.exc 5 km, depositing out side the MD land or where directed by Engg-in-charge, complete all as specified and directed.

M & L for providing water proofing treatment over non accessible roof complete all as specified and directed and comprising of followings :- (a). Providing average 15mm thick plaster in CM(Cement sand mortar) 1:3 mixed with water proofing compound when concrete is still green testing of RCC slab for any leakage/seepage and making good before carrying out the water proofing treatment.. (b). After the concrete is fully dried. It shall be cleaned free from dust and shall be painted with a coat of bituminous primer @ 0.40 liters/Sqm. (c). After primer, the entire roof surface shall be applied with hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm (d). Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film with standard weight not less than 3 Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as of manufacture’s technical representation. (e). Aluminium paint over APP Membrane finished evenly on entire surface for heat insulation and act as water bound layer .

M & L for providing water proofing treatment over accessible roof complete all as specified and directed and comprising of followings :- (a) Providing PCC 1:2:4 (12.5mm graded), average 50mm thick with finished slope of 1:30 to RCC roof slab , testing of RCC slab for any leakage/seepage and making good before carrying out the water proofing treatment. (b). Providing average 15mm thick plaster in CM(Cement sand mortar) 1:3 mixed with water proofing compound when concrete is still green. (c). After the concrete is fully dried. It shall be cleaned free from dust and shall be painted with a coat of bituminous primer @ 0.40 liters/Sqm. (d). After primer, the entire roof surface shall be applied with hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm (e). Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film with standard weight not less than 3 Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as of manufacture’s technical representation. (f). Pre casted machine pressed cement conc tiles 250x250x20-22mm/ 300x300x20-22mm confirming to IS : 1237:1980 laid over 15 mm thick cement mortar screed in 1:3. Joints shall be flushed pointed in CM 1:3.

M&L gunniting to RCC works in column ,beams, slabs, landing, balconies etc by removing loose concrete including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick to rusted steel reinforcement after removing/ cleaning all rust by sand/grit blasting and supply and fixing welded steel wire mesh 75mm x 75mm with 3mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sika. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2.5 Kg/sqcm and applying 25mm thick layers of gunniting in cement mortar (1:2) using ordinary port land cement of 43 grade over wherever required complete all as specified and directed. Note:- (i) After placing the additionnal reinforcement all concrete surface shall be throughly scrubbing with brushed washed with water and allow dry and plaster complete all as specified. (ii) Work to be carried out as in patches as directed by Engr-in-charge. (iii) Rate for scaffolding ,15mm thick plaster in CM 1:4 and TMT bars (where applicable) deemed to be included in quoated rate. (iv) preparation of surface and applying two coat of OBD with one coat of primer over 1mm thick wall care putty,deemed to be included in this item.

M&L for solid PVC wall lining consisting of 5.00mm thick single side prelaminated PVC sheet inclusive of insolvent cement and fixing at site on PVC frame complete all as specified and as directed . Note:-incl Taking down of existing switch board/tube light etc and refixing the same.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed

Excavation in trenches soft/loose soil not exc 1.5 m wide and not exc 1.5m depth and getting out, complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft to loose soil complete all as specified and directed

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for prepararing old decorated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic Enamel paint over primer ,in any position including necessary scaffolding and cardles complete all as specified and directed.

S&F in repairs Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed.

M&L Mild steel TMT bars 5mm dia and over upto 10mm dia in stirrups,spacers and binders, cut to length, bent to shape required binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L RCC M-25 Design Mix in Foundations, includin rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 Design Mix in Columns,pillars,piers, posts and struts etc complete all as specified and directed.

Use & wate of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface complete all as specified and directed .

Use & wate of formwork to sides of pillars post, strut, piers ,columns and stanchions vertical or to batter for fair finished surface complete all as specified and directed .

S&F stainless steel (Grade 304) railing/Gate/frame are made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F in repair venetian blinds in double layers roller type of approved colour including all accessories, fitting/fixtures required for fixing the same in windows complete all as specified and directed.

M&L in repair for structural steel Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410 -W(Gde-E- 250) quality-A all as specified and directed.

Dismantling of AC/steel sheets and the like (corrugated/semi corrugated/plain) in roof covering incl ridge complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating(150GSM) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed..

S&F mild steel works as in wind ties for roof incl securing bolts; posts and struts in fencing incl cutting tops to shape as directed ,drilling holes,notching for wire,etc;flat iron fillets (for securing wire mesh etc) incl all necessary drilling,bolting or riveting etc and similar work conforming to Fe 410-0 or Fe 310-0 upto any height of bldg complete all as specified and directed.

Taking down carefully Aluminium/copper/Flame proof point wiring (Light/ Fan/Socket/AC or power) complete incl fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making good disturbed surface of wall/ceiling etc., all as specified and directed.

M&L for concealed point wiring for One light/fan/exhaust fan point controlled by one way 5 Amp switch complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor FRLS PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed.

Description all as per srl item no. 57 above but for 3/5 pin socket outlet for 5 Amps on independent board with 1.5 sqmm FRLS PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable as earth continuity conductor complete all as specified & directed.

Description all as per srl item no. 57 above but for 3/5 pin socket outlet for 5 Amps on same board.

Description all as per srl item no. 57 above but for 3/5 pin socket outlet for 15 Amps on independent board with 2.5 sqmm FRLS PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable as earth continuity conductor complete all as specified & directed.

S&F surface/wall mounting LED batten,extruded aluminium housing provided for efficient heat dissipatin with poly carbonate diffuser & intergrated electronic driver including 20 watt LED complete fitting as specified and directed.

S&F in ceiling recessed mounting 2x2 LED panel square type, complete of size 20 watt including connecting wire from celing rose to light fittings compelet all as specified and directed. Make-Crompton, Model-LCTLRE36FOCDL / Orient, Model- LTSAQ-36-C / Jaquar, model-LULTSLS036XC or equilent as approved by the GE.

Supply and fixing ceiling fans, complete with three blade, down rod, electronic regulator and accessories 230v, 1200mm sweep .Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC),with squirrel cage induction motorcompelet all as specified and directed.

Supply & fix socket outlet 2 in 1, 3 pin 5/6 Amps, flush universal type complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 15/ 16 Amps, 240 volts complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 3/5 pin 15 Amps, flush universal type complete all as specified & directed.

Supply & fix ceiling rose, surface bakelite, 32.5x25mm surface type, three terminals, AC 240 volts complete all as specified & directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4 sqmm drawn in and including PVC rigid conduit medium grade not less than 20mm dia with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 4 sqmm as earth continuity and connected of common earth dolly including taking down old unserviceable sub main wiring complete all as specified & directed. Note:- Two runs of 4sqmm cable & one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6 sqmm drawn in and including PVC rigid conduit not less than 20mm dia medium grade with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 6 sqmm as earth continuity and connected of common earth dolly complete including taking down old unserviceable sub main wiring all as specified & directed. Note:- Two runs of 6sqmm cable & one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Supply, laying commissioning, testing of XLPE , armoured heavy duty electric under ground LT cable 1100 volts grade of size 6 Sqmm 2 core with aluminium conductor to IS 1554, ISI laid in tranchies, fixing on wall, under road crossing, etc complete all as specified and directed.

Removing surplus excavated materials n.exc.50mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed

Supply and fix double wall corrogated as per IS 16025 PART-24 pipe of outer dia 40mm and inner dia 30 mm ( including all connected fitting and accessories) all as specified and directed.

Supply and fix factory made, dust froof , vermin proof , outdoor type polycarbonate boxes not less in size 200x300x105 mm incl MCB SP 6 Amps, 4 Nos aluminium bus bar, insulator, GI nut, bolts and washers and aluminium lugs etc and fixing on pole,wall all as specified and directed by engr in charge.

Supply and fix doom light 45W LED on pillar all as specified and directed. MAKE- BAJAJ (BRIL 45W LED NW) / Crompton / Orient or other equilent as approved by the GE.

Taking down carefully and refixing the same split AC of 1.5TR including disconnecting all electric connection and copper pipe and connected items etc and gas charging with required quantity of refrigerant gas R-22/M-22 or suitable gas and all fixing arrangement all as specified and directed by engineer in charge.

Supply and fixing sheet metal enclosure single pole and neutral with a two pin & earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Taking down carefully and refixing the same voltage stablizer for automatic operation, single phase naturally air cooled indoor type for voltage regulation of split AC and UPS complete all as specified and directed by engineer in charge.

S&F factory made sheet metal enclosure MCB DB 240 volts, 8 ways with 250A rated bus bar, SPN, double door type IP43 suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

Supply & fix MCB, SPN, AC, 240 volts of 32 to 63 Amps capacity "C" series and making connections complete all as specified & directed.

Supply and fixed MCB SP 5 to 32 Amp 240V, 'C' series 10 KA, complete all as specified and directed.

M&L for chemical earthing complete with Copper plate electrode of size 900mmx600mmx5 mm thick buried directly in earth pit not less than 4.7 meter below normal ground level and complete size of pit 1.6 meter x 0.61 meter x 5.10 meter earth plate connected to copper strip 32x6mm by means of copper/ brass nut, bolts earth strip protected with 40 mm bore light grade GI pipe from electrode and upto and including the earth test point of gun metal , 20mm bore watering pipe, medium grade GI pipe including funnel wiremess providing alternate layer of 10 cm each charcoal salt and magnesium sulphate layer upto 1.2 meter and 2 Kg coper sulphate to be added around including excavation, returning in filling, removal of surplus soil to a distance not exceeding 50m, PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in earth pit with 40 x 40 x 6 mm MS Angle iron frame of required size 40mm thick and pit cover of well dressed dholpur stone 40mm thick 40x40m size with providing handle in center by ,aking hole and handle made by 12mm MS Rod in round/rectangle shape of handle of 100mm grip, 15mm thick plastering with CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia medium grade GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part-I (2009) and connected to earth test incl testing complete all as specified and directed.

M&L for earthing in renewal of complete with galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron wire of size 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal dust and common salt PCC (1:2:3) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing complete all as specified an directed.

M/S Solanki Brothers (BID ID -3466061)

GUPTA ENGINEERING WORKS (BID ID -3466020)

aman construction & general suppliers (BID ID -3460713)

rohan traders (BID ID -3460316)