maintenance works of distrubution system and terna ruibhar WTP at dharashiv city yearly 2025_26

Amount

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated

Excavation for foundation / pipe trenches in hard murum including removing the excavated

Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road

Excavation for foundation / pipe trenches in hard rock and concrete road by hiselling,wedging, line drilling by echanical means or by all means other than blasting

Excavation for foundation / pipe trenches in slush muddy / marshy / slushy / soil including use of poclain,

Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches,

Refilling the trenches with available excavated stuff with soft material

Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials

Filling in plinth and floors / trenches with contractor's murum

Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling

Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats

Providing structural steel work in single stanchions composed of RSJ, channel,etc.

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding PCC M-150

Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation In RCC M-200

Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation In RCC M-250

Providing and fixing in position steel bar reinforcement of various diameters Tor Steel

Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite /quartzite / gneiss metal for RCC works in foundation RCC M-250

Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI 100 mm DIK7

vii) 300 mm

viii) 350 mm

xii) 600 mm

Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI 500 mm DIK9

Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position,100 mm DIK7/K9

vii) 300 mm

viii) 350 mm

xii) 600 mm

Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect 100 mm

vii) 300 mm

viii) 350 mm

xii) 600 mm

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint

MS barrels (pipe pieces) locally manufactured (for small quantities)

Erecting and hoisting in position and jointing, testing M.S./ C.I. D/F pipes and specials 100 mm

vii) 300 mm

viii) 350 mm

xii) 600 mm

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut boltsa) 80 to 300 mm dia.

b) 350 mm & above dia.

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement 63mm.Working Pressure 4 Kg./Sq.cm

iii) 90 mm.

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement 63mm.Working Pressure 6 Kg./Sq.cm

iii) 90 mm.

Lowering, laying and jointing with P.V.C. pipes and specials 63mm.4/ 6 Kg./Sq.cm

iii) 90 mm.

Providing & Supply of PVC pipe specials for all class pipes.

63 mm Tee 4 /6 kg/Cm2

75 mm Tee 4 /6 kg/Cm2

90 mm Tee 4 /6 kg/Cm2

110 mm Tee 4 /6 kg/Cm2

140 mm Tee 4 /6 kg/Cm2

160 mm Tee 4 /6 kg/Cm2

63 mm Elbow 4 /6 kg/Cm2

75 mm Elbow 4 /6 kg/Cm2

90 mm Elbow 4 /6 kg/Cm2

110 mm Elbow 4 /6 kg/Cm2

140 mm Elbow 4 /6 kg/Cm2

160 mm Elbow 4 /6 kg/Cm2

S.Saddle 63 x20mm

S.Saddle 75 x20mm

S.Saddle 90 x20mm

S.Saddle 110 x20mm

S.Saddle 140 x20mm

S.Saddle 160 x20mm

63 mm End cap( plain)

75 mm End cap( plain)

90 mm End cap( plain)

110 mm End cap( plain)

140 mm End cap( plain)

160 mm End cap( plain)

Reducer 75 x63

Reducer 90 x63

Reducer 110 x63

Reducer 140 x63

Reducer 160 x63

Reducer 90 x75

Reducer 110 x75

Reducer 140 x75

Reducer 160 x75

Reducer 110 x90

Reducer 140 x90

Reducer 160 x90

Reducer 140 x110

Reducer 160 x110

Reducer 160 x140

PVC Coupler 4 /6 Kg/Cm2 63 mm

PVC Coupler 4 /6 Kg/Cm2 75 mm

PVC Coupler 4 /6 Kg/Cm2 90 mm

PVC Coupler 4 /6 Kg/Cm2 110 mm

PVC Coupler 4 /6 Kg/Cm2 140 mm

PVC Coupler 4 /6 Kg/Cm2 160mm

PVC Bend 4 /6 Kg/Cm2 63 mm

PVC Bend 4 /6 Kg/Cm2 75 mm

PVC Bend 4 /6 Kg/Cm2 90 mm

PVC Bend 4 /6 Kg/Cm2 110 mm

PVC Bend 4 /6 Kg/Cm2 140 mm

PVC Bend 4 /6 Kg/Cm2 160 mm

PVC Tail Piece without flange 4 /6 Kg/Cm2 63 mm

PVC Tail Piece without flange 4 /6 Kg/Cm2 75 mm

PVC Tail Piece without flange 4 /6 Kg/Cm2 90 mm

PVC Tail Piece without flange 4 /6 Kg/Cm2 110 mm

PVC Tail Piece without flange 4 /6 Kg/Cm2 140 mm

PVC Tail Piece without flange 4 /6 Kg/Cm2 160 mm

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect,b) MEDIUM i) 15 mm.

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xxi) 150 mm.

Lowering, laying and jointing G. I. pipes and specials of following class and diameter b) MEDIUM i) 15 mm.

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xxi) 150 mm.

G.I. Bend "B" Class Supplying and erecting "B" class G.I. Bend in position with necessary material 15 mm

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xxi) 150 mm.

G.I. Tee "B" Class Supplying and erecting "B" class G.I. Tee in position with necessary material 15 mm

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xxi) 150 mm.

G.I. Coupling / Nipple "B" Class Supplying and erecting "B" class G.I. Coupling / Nipple in position with necessary material 15 mm

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xxi) 150 mm.

G.I. Union (Heavy Duty) Supplying and erecting Heavy Duty G.I. Union in position with necessary material 15 mm

iii) 25 mm.

G.I. Elbow (Heavy Duty)Supplying and erecting Heavy Duty G.I. Elbow in position with necessary material 15 mm

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xxi) 150 mm.

M.S. Flanges Providing, fabricating, erecting, M.S. Flanges sleep on type (all tables) of required size and thickness with both side machined.

Up to 300 NB

Above 300 NB

Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints Double socket bend 90 degree 100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints Double socket bend 45 degree 100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints Double socket bend 22.5 degree 100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints Double socket bend 11.25 degree 100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints Double socket concentric reducer 100 x 80 mm dia

150 x 80 mm dia

150 x 100 mm dia

200 x 80 mm dia

200 x 100 mm dia

200 x 150 mm dia

250 x 80 mm dia

250 x 100 mm dia

250 x 150 mm dia

250 x 200 mm dia

300 x 100 mm dia

300 x 150 mm dia

300 x 200 mm dia

300 x 250 mm dia

350 x 200 mm dia

350 x 250 mm dia

350 x 300 mm dia

400 x 200 mm dia

400 x 250 mm dia

400 x 300 mm dia

400 x 350 mm dia

450 x 350 mm dia

450 x 400 mm dia

500 x 350 mm dia

500 x 400 mm dia

500 x 450 mm dia

600 x 300 mm dia

Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints Double Socket Tee with Flange branch-PN-10 100 x 80 mm dia

100 x 100 mm dia

150 x 100 mm dia

150 x 150 mm dia

200 x 80 mm dia

200 x 100 mm dia

200 x 150 mm dia

200 x 200 mm dia

250 x 80 mm dia

250 x 100 mm dia

250 x 150 mm dia

250 x 200 mm dia

250 x 250 mm dia

300 x 80 mm dia

300 x 100 mm dia

300 x 150 mm dia

300 x 200 mm dia

300 x 250 mm dia

300 x 300 mm dia

350 x 80 mm dia

350 x 100 mm dia

350 x 150 mm dia

350 x 200 mm dia

350 x 250 mm dia

350 x 300 mm dia

350 x 350 mm dia

400 x 80 mm dia

400 x 100 mm dia

400 x 150 mm dia

400 x 200 mm dia

400 x 250 mm dia

400 x 300 mm dia

400 x 400 mm dia

450 x 100 mm dia

450 x 150 mm dia

450 x 200 mm dia

450 x 250 mm dia

450 x 300 mm dia

450 x 350 mm dia

450 x 400 mm dia

450 x 450 mm dia

500 x 100 mm dia

500 x 150 mm dia

500 x 200 mm dia

500 x 250 mm dia

500 x 300 mm dia

500 x 400 mm dia

Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints Flange Socket-PN-10 100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints,Class NP-III (For 2.00 m. length)80 mm

iii) 150 mm

vii) 300 mm.

viii) 350 mm.

xii) 600 mm.

xiii) 700 mm.

xiv) 800 mm.

xvi) 1000 mm.

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints i)80 mm

iii) 150 mm

vii) 300 mm.

viii) 350 mm.

xii) 600 mm.

xiii) 700 mm.

xiv) 800 mm.

xvi) 1000 mm.

Providing and supplying in H. D. P. E. PIPES standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector PE-100 a) 6 Kg/Sq. cm : i) 63 mm

iii) 90 mm

vii) 160 mm

viii) 180 mm

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete PE-100 a) 6 Kg/Sq. cm : i) 20 mm

Providing and Supplying UPVC pipes i) 20 mm

iii) 32 mm

Lowering, Laying and Jointing UPVC pipes i) 20 mm

iii) 32 mm

Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only PN 16 (SDR 9) i) 20 mm

iii) 32 mm

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes,Couplers 20

Couplers 25

Couplers 32

Couplers 40

Couplers 50

Couplers 63

Couplers 75

Couplers 90

Couplers 110

Couplers 125

Couplers 140

Couplers 160

Couplers 180

Couplers 200

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes,Equal Tee 20

Equal Tee 25

Equal Tee 32

Equal Tee 40

Equal Tee 50

Equal Tee 63

Equal Tee 75

Equal Tee 90

Equal Tee 110

Equal Tee 125

Equal Tee 160

Equal Tee 180

Equal Tee 200

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes Elbow 90 Deg.20

Elbow 90 Deg. 25

Elbow 90 Deg. 32

Elbow 90 Deg. 40

Elbow 90 Deg. 50

Elbow 90 Deg. 63

Elbow 90 Deg. 75

Elbow 90 Deg. 90

Elbow 90 Deg. 110

Elbow 90 Deg. 125

Elbow 90 Deg. 160

Elbow 90 Deg. 180

Elbow 90 Deg. 200

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes Elbow 45 Deg. 32

Elbow 45 Deg. 40

Elbow 45 Deg. 50

Elbow 45 Deg. 63

Elbow 45 Deg. 75

Elbow 45 Deg. 90

Elbow 45 Deg. 110

Elbow 45 Deg. 125

Elbow 45 Deg. 160

Elbow 45 Deg. 180

Elbow 45 Deg. 200

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes Reducer 25X20

Reducer 32X20

Reducer 32X25

Reducer 40X32

Reducer 50X32

Reducer 50X40

Reducer 63X32

Reducer 63X40

Reducer 63X50

Reducer 75 x 63

Reducer 90X63

Reducer 90X75

Reducer 110X50

Reducer 110X63

Reducer 110X75

Reducer 110X90

Reducer 140X110

Reducer 160X110

Reducer 160X140

Reducer 180X110

Reducer 200X63

Reducer 200X90

Reducer 200X110

Reducer 200X140

Reducer 200X160

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes End Cap 20

End Cap 25

End Cap 32

End Cap 40

End Cap 50

End Cap 63

End Cap 75

End Cap 90

End Cap 110

End Cap 125

End Cap 140

End Cap 160

End Cap 180

End Cap 200

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint LNPE 63

Providing & Supply of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shall be tested as per ISO:3459, ISO:3501 & ISO:3503, suitable for drinking water

Male Adaptor 20 x 1/2"

Male Adaptor 25 x 3/4"

Male Adaptor 32 x 1"

Male Adaptor 40 x 1 "

Male Adaptor 50 x 1/2"

Male Adaptor 63 x 2"

Female Adaptor 20 x 1/2"

Female Adaptor 25 x 3/4"

Female Adaptor 32 x 1 "

Female Adaptor 40 x 1 "

Female Adaptor 50 x 1 "

Female Adaptor 63 x 2"

Coupling 20 x 20

Coupling 25 x 25

Coupling 32 x 32

Coupling 40 x 40

Coupling 50 x 50

Coupling 63 x 63

Reducing Coupling 25 x 20

Reducing Coupling 32 x 20

Reducing Coupling 32 x 25

Reducing Coupling 40 x 25

Reducing Coupling 40 x 32

Reducing Coupling 50 x 32

Reducing Coupling 50 x 40

Reducing Coupling 63 x 50

90 Deg. Elbow 20

90 Deg. Elbow 25

90 Deg. Elbow 32

90 Deg. Elbow 40

90 Deg. Elbow 50

90 Deg. Elbow 63

90 Deg. Elbow threaded male take off

90 Deg. Elbow threaded male off take 20 x 1/2"

90 Deg. Elbow threaded male off take 25 x 3/4"

90 Deg. Elbow threaded male off take 32 x 1"

90 Deg. Elbow threaded male off take 40 x 1/4"

90 Deg. Elbow threaded male off take 50 x 1/2"

90 Deg. Elbow threaded male off take 63 x 2"

90 Deg. Elbow threaded Female off take 20 x 1/2"

90 Deg. Elbow threaded Female off take 25 x 3/4"

90 Deg. Elbow threaded Female off take 32 x 1"

90 Deg. Elbow threaded Female off take 40 x 1 "

90 Deg. Elbow threaded Female off take 50 x 1 "

90 Deg. Elbow threaded Female off take 63 x 2"

Equal Tee 20 x 20 x 20

Equal Tee 25 x 25 x 25

Equal Tee 32 x 32 x 32

Equal Tee 40 x 40 x 40

Equal Tee 50 x 50 x 50

Equal Tee 63 x 63 x 63

End Cap 20

End Cap 25

End Cap 32

End Cap 40

End Cap 50

End Cap 63

Ferrule Tapping Tee 63 x 1/2"

Ferrule Tapping Tee 75 x 1/2"

Ferrule Tapping Tee 90 x 1/2"

Ferrule Tapping Tee 110 x 1/2"

Ferrule Tapping Tee 140 x 1/2"

Ferrule Tapping Tee 160 x 1/2"

Ferrule Tapping Tee 200 x 1/2"

Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia Without by pass arrangement -PN -1.6 i)50 mm.

iii) 80 mm.

vii) 200 mm.

viii) 250 mm.

xii) 450 mm.

xiii) 500 mm.

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, ncluding inspection charges Sluice valves - PN -1.6 (Without by pass )i) 50 mm.

iii) 80 mm.

vii) 200 mm.

viii) 250 mm.

xii) 450 mm.

xiii) 500 mm.

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material i) 50 mm.

iii) 80 mm.

vii) 200 mm.

viii) 250 mm.

xii) 450 mm.

xiii) 500 mm.

Relowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material i) 50 mm.

iii) 80 mm.

vii) 200 mm.

viii) 250 mm.

xii) 450 mm.

xiii) 500 mm.

Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including inspection charges,S.B.R. Gaskets for C. I. / D.I. Pipes i) 80 mm

iii) 125 mm

vii) 300 mm

viii) 350 mm

xii) 600 mm

d) Providing Rubber Gasket -EPDM Gaskets for C. I. / D.I. Pipes i) 80 mm.

iii) 150 mm.

vii) 350 mm.

viii) 400 mm.

xii) 700 mm.

b) Sealing ‘ O' Rings of SBR (for CID Joints)i) 80 mm

iii) 125 mm

Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non-rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement.(For PN 10 & 16) 50 mm

iii) 100 mm.

vii) 300 mm.

viii) 350 mm.

Providing and supplying D.I. fittings with ISI mark Mechanical joint Collar/Coupling confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.100 mm dia

iv)150 mm dia

v) 200 mm dia

vi) 250 mm dia

vii) 300 mm dia

viii) 350 mm dia

ix) 400 mm dia

x) 450 mm dia

xi) 500 mm dia

xii) 600 mm dia

xiii) 700 mm dia

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes 10 mm thick 200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

Providing and applying primer and one coat of red oxide of iron paint internally including cleaning the surface of the pipes with steel scrappers, wire brushes, and metal cleaning solution, etc

Lowering, laying in position to correct line and level including M. S. pipes 200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification 10 mm.

Gas cutting (either square cut or V cut) pipes, plates, etc.

Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long For tape of 10 M length

Providing, hoisting and fixing in position C.I. manhole, frame and cover of best quality and of required size and shape with locking arrangements including applying 2 coats of anti-corrosive paint, etc. complete Rate on weight basis for any size and type of frame and cover

Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material

Providing and applying epoxy paint of approved make (Shalimar, Ciba or Mahindra & Mahindra) to concrete surface for RCC For old surfaces - Two coats

Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge.

Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape,

Providing & doing Repair works for Air Valve Leakage Work including Welding work set, Rent of Jenerator, Transporatation of Jenerator, M.S. Tail piece, Providing Gas Cutter with Chrges of Gas, Charges of J.C.B., Charges of Diesel, Welding Rod, Providing Pump set for Dewatering and Labour Charges etc. comp.

Providing & doing Repair works for M.S./DI Pipe Line Leakage Work including Welding work set, Rent of Jenerator, Transporatation of Jenerator, M.S. Tail piece, Providing Gas Cutter with Chrges of Gas, Charges of J.C.B., Charges of Diesel, Welding Rod, Providing Pump set for Dewatering and Labour Charges etc. comp. 100 to 299 mm dia M.S.

250 mm dia M.S.

300 mm dia M.S.

350 mm dia M.S.

400 mm dia M.S.

450mm dia M.S.

500 mm dia M.S.

600 mm dia M.S.

700 mm dia M.S.

Providing Air Valve Ball i) 100 mm dia.

Providing J.C.B. on Rental Basis

Rent for welding set with Generator

Rent for Compressor with fuel

Rent for Concrete breaker & Compressor

Rent for poclain

Rent for Crane

Rent for chain pully block with tripod

Desludging / Desilting mud Pump with Operator

Fitter 1st class

Plumber(Building/Pipeline)

Truck hire charges for 50 km & above

Pipe cutter with operator

PVC Boll valve i) 65 mm dia.

ii)80 mm dia.

iii)100 mm dia.

iv)125 mm dia.

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.,Ferrule Tapping Tee i)90 x 1/2"

15mm Dia Heavy duty Brass/Polyprophylyne Ferrule

Providing, installing and giving satisfactory field testing of Domestic water meter, horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with couplings at both ends and conforming to class B as per IS 779/1994 (VI Revision) with ISI mark along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour. i) 15 mm dia

ii) 20 mm dia

iii) 25 mm dia

iv) 40 mm dia

Providing, installing and giving satisfactory field testing of Domestic water meter, horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with couplings at both ends and conforming to class B as per ISO 4064 along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour etc with OIML / MID certification for Abroad and FCRI for India including 36 months guarantee etc completei) 15 mm dia

ii) 20 mm dia

iii) 25 mm dia

iv) 40 mm dia

Providing, installing and giving satisfactory field testing of domestic multijet mechanical AMR water meters horizontal inferencial with magnetic drive and dry dial suitable for ambient 50oC temperature duly sealed against tampering complete with coupling at both ends and conforming to ISO 4064 with GSM / radio frequency ( RF ) for communication to server via transreceiver alongwith Hand held Device and PC software etc complete with EEC / OIML.MID certification for Abroad meter and FCRI for India including 36 months guarantee etc complete.i) 15 mm dia

ii) 20 mm dia

iii) 25 mm dia

iv) 40 mm dia

Providing, installing and giving satisfactory field testing of bulk water meter, horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with flanges at both ends and conforming to class B as per ISO 4064 along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour etc with OIML. MID certification for Abroad meter and FCRI for India including 36 months guarantee etc complete..i) 50 mm dia

ii) 80 mm dia

iii) 100 mm dia

Providing, installing and giving satisfactory field testing of domestic battery operated AMR water meters with no measurement of air along with manufacturing test certificate and guarantee certificate with battery life of minimum 10 years with GSM / RF technology for communication to server with PC software including 36 months guarantee, etc. complete..i) 15 mm dia

ii) 20 mm dia

iii) 25 mm dia

iv) 40 mm dia

Providing,installing testing and commissioning of in line battery operated ultrasonic bulk type water meters ISO 4064 with built in data logger and GSM/GPRS modem for transfer of data communication to remote central computer as per working on following conditions and specifications.The meter shall be suitable for 50oC and provided with IP 68 protection class with complete immersion of water.The meter shall have battery life of min.10 years should be able to detect the reverse flow volume and tampering.The accuracy of the meter shall be +/- 1 % of measured value including 36 months guarantee etc complete.( With Simcard and its charges,valid for 36 months).i) 50 mm dia

ii) 80 mm dia

iii) 100 mm dia

Providing & doing Repair works for M.S./DI Pipe Line Leakage Work including Welding work set, Rent of Jenerator, Transporatation of Jenerator, M.S. Tail piece, Providing Gas Cutter with Chrges of Gas, Charges of J.C.B., Charges of Diesel, Welding Rod, Providing Pump set for Dewatering and Labour Charges etc. comp. 100 to 299 mm dia M.S.

250 mm dia M.S.

300 mm dia M.S.

350 mm dia M.S.

400 mm dia M.S.

450mm dia M.S.

500 mm dia M.S.

600 mm dia M.S.

700 mm dia M.S.

Providing & doing Repair works for Air Valve Leakage Work including Welding work set, Rent of Jenerator, Transporatation of Jenerator, M.S. Tail piece, Providing Gas Cutter with Chrges of Gas, Charges of J.C.B., Charges of Diesel, Welding Rod, Providing Pump set for Dewatering and Labour Charges etc. comp.

Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc.complete.

Comression Saddle all size

ISI Mark Ferrul

Ball Valve Plastic (Heavy Body)20 mm dia,

Labour Suppying

joint rassi for valve

check nut for valve

bearing for valve

bush for valve

Nut with Bolt

Rubber sheet

Providing uncoursed rubble masonry of trap / granite / quartzite /gneiss stone in cement mortar1:3 in basement with patent water proofing compound added to it at rate of 1Kilogram per bag of cement including bailing out water manually,scaffolding racking out joints when plastering is to be done and watering etc. complete.

Providing first class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering etc.Complete.

Providing and supplying Kinetic Double Orifice type Air Valves 80 mm

Providing and supplying Kinetic Double Orifice type Air Valves 100 mm

Providing and Supplying Blue MDPE pipes 20 mm

Providing and Supplying Blue MDPE pipes 25 mm

Providing and Supplying Blue MDPE pipes 32 mm

Providing and Supplying Blue MDPE pipes 40 mm

Providing and Supplying Blue MDPE pipes 50 mm

Sujata Construction (BID ID -6788525)

SIDDHESHWAR INFRASTRUCTURE (BID ID -6785098)