Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.5 LAccepted-AOC 1ST FLOOR 100 FT ROAD NEAR HERO HONDA AGENCY OPP NARANG CHILDREN HOSPITAL BIBIWALA ROAD NORTH ESTATE | L1 | Accepted-AOC AWARD | |
| 2 | L2₹51.5 L+₹1.2 L (2.37%)Rejected-Finance 13 CEMENTRY ROAD DANAPUR CANTT PATNA BIHAR | PATNA | PATNA | BIHAR | 801503 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹52.3 L+₹2.0 L (3.96%)Rejected-Finance 20 23 MANASKAMANA ROAD BANSBARI MORE PS ENGLISHBAZAR DT MALDA | ENGLISHBAZAR | MALDA | WEST BENGAL | 732101 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹52.5 L+₹2.1 L (4.26%)Rejected-Finance H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹52.9 L+₹2.6 L (5.12%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
25 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE DANAPUR CANTT PIN 801503
PROVN OF 01 STORE ROOM NEAR OLD PT GROUND AT BRC AND WORKS TO BLDG NO T-34 (RECORDS CLK LIVING LINE) OTM ACCN AT BRC UNDER GE DANAPUR CANTT
2022_MES_561033_1
GE/DNR/T-55/OF 2022-23 / 8630/E8
Open Tender
Civil Works
Item Rate
180 days
DANAPUR CANTT
AS PER NIT
8 documents required · 8 mandatory
₹500
GE DANAPUR
₹95,000
Yes
23 Dec 2022
2 Nov 2022
28 Nov 2022
2 Nov 2022
25 Nov 2022
16 Nov 2022
Amount
Surface excavation n. exc 30cm deep & avergeing 15cm deep and getting out in soft/loose soil complete all as specified & directed.
Boring holes 5m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Excavation over area not exc. 1.50 m depth and getting out in soft / loose soil complete all as specified and directed.
M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed..
M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M&L for hard core of broken brick gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M&Lfor providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as directed
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
Formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished, square, rectangular or polygonal surfaces of concrete complete all as specified and directed.
M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.
Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.
Supply only water proofing compound (liquid),ISI marked complete all as specified & directed.
M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed .
M & L Rendring 10mm thick in cement mortar 1:4 on concrete surfacves/chajja/ceiling, etc finished even and smooth withour using extra cement complete all as specified and directed.
Preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying three coats of white wash complete all as specified and directed.
M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified and directed.
M&L, treating the un der plinth protection at the rate of 5 litres of emulsion per square meter of surface of flooring complete all as specified and directed
M&L, treating the top surface of filled earth at the rate of 5 litres of emulsion per square meter of surface of flooring complete all as specified and directed
S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 92 x 31.75 x2.00 mm @ 1.49Kg/RM (b) Style/Vertical member of size 40 x 27.2 x 2.00 mm @ 0.798Kg/RM (c) Top and bottom rail of size 40 x 27.2 x 2.00 mm @ 0.798Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement as required etc
S&F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts (each shutter having two tower bolts 100mm long) complete without glazing bars dovetailed or welded including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron complete all as spd and directed
S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.
S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.
S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified and directed.
S&F 2nd Class hardwood Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and as directed.
S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.
S & F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.
S&F Aluminium handles, cast type, anodized 150 mm size ISI Marked complete all as specified and directed.
M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) 75mm thick as in sub base finished even & fair etc complete all as specified and directed.
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Screed bed or beddinglayer of mortar 15 mm thick in cm 1:6 complete all as directed.
M&L Kota stone slab 20-25mm thickin riser of steps, skirting, dadoand pillar laid over cementscreed and jointed with ditto asper item including rendering 10mm thick on fair faces of brickwork or concrete sur faces in CM 1:4
M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) 100mm thick as in sub base finished even & fair etc complete all as specified and directed.
M&L for 10mm thick Dark shade vitrified ceramic tiles polished in floors/area of tile, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15mmc thick screed bed or bedding layers of cement mortar 1:4 to matrch shade, pattern, laying etc of tiles complete all as specified & directed. Make Somany/Johnson/Kajaria/Orient
M&L for 10mm thick dark shade vitrified ceramic tile in as in skirting/Dado set & jointed in neat cement slurry pointed in coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Machine Pressed precast PCC interlocking reflected glazed type paver block 60mm thick size and confirming to IS 15658-2006 of 60 mm thickness M-35 Grade ® mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed by Engr-in-Charge. The pattern of paver block & make shall be approved by GE. Make : Poddar Tiles/ Mehtab tile
M&L for PCC 1:2:4 type B-0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed.
M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement over roof slab etc complete all as specified. (Note : WPC will be measured & paid for separately).
M & L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. Note:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with CM 1:3 complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings.
M&L Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge/cladding to wall fixed with self tapping screws as specified. complete all as specified and directed.
M&L Pre painted galvalume sheet aluminium zinc coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge/cladding to wall fixed with self tapping screws as specified. complete all as specified and directed.
S & F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats including welding etc complete all as specified and directed
Dismantling timber scantling 40 sqcm and over in section in any position framed work complete all as specified and directed.
M&L 2nd class softwood scantling, as in repairs, to replace old and decayed timber (including piecing, scarfing, etc, or old and new timbers if required) and removing defective portions to store complete all as spd and as directed.
M&L for Preparing old wooden surfaces exceeding 10Cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M& L providing, cement concrete Type B0 1:2:4 (using 12.50mm graded aggregate in roof kerbs or mud stop, rounded or chamferred on edges complete all as directed and specified.
Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including removal to a distance exc 250 m but n.exc 500 m complete all as specified and as directed.
M&L for preparation of old decorated plastered/ unplastered surfaces of walls of any description by washing, rubbing down and applying one coat of cement base paint complete as specified and directed.
M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coats of distemper oil emulsion, white or tinned (change of colour as required) complete all as specified and directed.
M&L for preparation of newly plastered surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Dismantling wall and ceiling boards any thickness, including cover fillets complete all as specified and directed.
S&F Gl frame work powder coated for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and size of grid 605mm x 605mm complete for false ceiling all as specified and directed by Engr-in-Charge
S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
M & L for 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screw as per manufacturers instructions ® complete all as specified and directed. Make : Armstrong, Hunterdouglas etc
M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and directed. Make of Cable : Polycab/Havell's/Finolex and Make of PVC conduit : Plaza/Harsh/Kalinga Premium/AKG:-
All as per item No 72but for one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed.
All as per item No 72 but for one 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed.
All as per item No 72.00 above but wiring with 2.5 sq mm single core copper conductor and 2.5 sqmm earth wire for one socket out let 15/16 amps point on the independent boardcomplete all as specified and directed.
S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 240 Volt grade, ISI marked complete all as specified and directed.
S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 240 volts complete all as specified & directed.
Supply and fixing switch piano flush button single pole one way 15 amps, 240 Volts complete all as specified and as directed.
S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed.
S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed.
S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed.
Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.
Supply and fixing double door SPN DBs eight way of powder coated, double door DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .
Supply and fixing MCB SPN 5 to 40 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge.
S&F MCB SP of capacity 5 - 32 Amps 240 volts, 10 KA breaking capacity 'C' series incl connection complete all as specified & directed.
S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and electronic driver all accessories internally pre wired including 01 number 1x18/20 watt lamp and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed.
Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with electronic driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed.
Supply, installation, testing and commissioning of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz BEE 5 star rating, ISI marked complete with 30 cm down rod, canopy, blades, BLDC motoretc and connecting upto ceiling rose/connector with flexible wire of size 0.75 Sqmm including writing number with synthetic enamel paint complete all as specified and directed. Make Havells/Bajaj
Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/BAJAJ
M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.
M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation etc. complete all as specified and directed. Note :- Thickness of sand shall be measured 18 cm thick after punning.
M & L for Old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and directed.
Supply testing and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 4 core,16 Sqmm complete all as specified and directed
Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.
M/S PRAVIN ENTERPRISES
M/s Mukesh and company
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
MS BIJAY KUMAR AND SONS
M/S SAROJ KUMAR SINGH
ANAHITAS INFOSOLUTIONS PRIVATE LIMITED
M/S ANAND MOHAN ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .