SPL REPAIR/REPLACEMENT OF CGI SHEET OF BLDG NO P-17 AND AND SEPTIC TANK NETWORK OF SINGLE JCO/OR LIVING AT ARO GAYA, PROVN OF OVERHEAD SHED OF MDC AT MIL STN GAYA AND PROVN OF TOILET WITH FIVE URINAL POINTS FOR CANDIDATES OF ARO GAYA

Amount

Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed.

Dismentling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and directed by Engr-In-Charge

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using sub class old size bricks straight or curved on plan to any radius of half brick thick built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work using sub class old bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.

M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M & L for 15 mm thick rendering in CM 1:4 over fair faces of brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement complete.

M & L for 15 mm thick rendering in CM 1:6 over fair faces of brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement complete.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in roof covering/Valley/Gutter/Ridges, fixed with self tapping screws complete.

M&L Brick work using sub class old bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and directed by Engr-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises

M&L Aluminium anodised barrel tower bolts of extruded section 200mm long

M&L Butt hinges extruded al alloy with galvanised MS hinge pin anodised 100mm long

M&L Aluminium anodised handle extruded fabricated type 100mm long

S&F for Aluminium alloy, anodised,sliding door bolt 200mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F powder coated aluminium frame /shutters for windows, ventilators sliding/openable etc including joining cleat for fixing, locking arrangement, rubber beading, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/ INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely forsupply only as the labour element included in this item.(ii) Item shall be paid as per weight of aluminium section.(iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazingpin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface.

M & L for Brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4)

M & L RCC M-25 design mix using 20 mm graded aggregate in beams, cantilevers, lintels over 1.5 m span

M &L Glazed ceramic tiles in vertical surface 450X 300(7-8mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4 on fair face of brick work surfaces as backing for tiles all as specified and directed.

M &L Non - skid Ceramic tiles 7-8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm( size 400X 400 mm ), in floors etc.over 20mm screed bed of CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified ad as directed

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces

M & L for preparation of new plastered surfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed.

M & L two coat of cement base paint white or tinted on walls or fascia of roof or chajjas on new or old decorated prepared plastered/painted surfaces of bldg complete all specified & directed.

S&F in Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge.

S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.

Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 including all fittings laying in floors and wall complete all as specified and directed by Engr in charge.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete as all spfd directed by Engr-in-charge

Excavating in over area, n exc 1.5 m in depth and getting out in soft/loose soil.

Excavating in over area exc 1.5 m but n exc 3.0 m in depth and getting out in soft/loose soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but n.exc 3.00 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Returning filling including spreading levelling watering and well ramming not exc.25 cm thick soft or loose soil and getting out complete as all spfd and directed.

Removal of excavated soil upto distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above from starting point

S & F of vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.

S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete.

S&F brass chromium plated health faucet 15 mm with flexible tube 1.2 m long of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. (Make : Jaguar/Hindware)

S & F of 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.(Saint Gobain/ModiFloat)

S&F in repair 15 mm dia bore bib taps, brass chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F in repair 15 mm dia stop/angle valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.

S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.

S & F of Male Brass Threaded Adaptor (MTA/ MBTA) or Feale Brass Threaded Adaptor (FTA/ FBTA) complete.

S & F of PVC connections 15mm size with PTMT nuts of length 600mm

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place.

S & F 110mm dia bore PVC (SWR) bends with access door all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified.

S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete.

M & L Plain cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundation filling and mass concrete complete

S&F of 1000 Ltrs capacity white rotational Moulded ploythene water storage tank (cylinderical vertical with closed top) multilayered hoisted and fixed in position incl dismantling of existing tanks.

M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S & F made 35mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colur PVC sheet reinforced with ms squre tube, supplying &fixing in opening as complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rail. MS frame shall be covered with heat moulded PVC”C” channel having a PVC steel strip of 20mm width stuck inside with solvent cement for style and plain coloured PVC sheet for top rail lock rail &bottom rail on either side &as gap insert for top rail and bottom rail paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to style &rails with suitable PVC sheet beading. And jointed together with solvent cement, supplying and fixing in the frames at site as per specification &drawing

S & F Aluminium handle cast type anodized 150mm size

S&F medium weight stainless steel butt hinge with galvanized and fixed 100mm long complete.

M&L for DWC HDPE pipes class SN-8 laid and jointed complete as per manufacturer instruction in trenches of 150 mm ID/180 mm OD of pipe complete.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work incl necessary form work and set in CM 1:4 complete

S&F for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (horizontal or sloping) complete as all spfd and directed.

M&L of mild steel TMT Bars 10 mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete as all spfd and directed.

M&L RCC 1:2:4 Type B-1 (20mm graded aggregate) slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete as all spfd and directed by Engr-in-charge

M&L Aluminium anodised barrel tower bolts of extruded section 100mm long

M & L RCC M-25 design mix using 20 mm graded aggregate in Foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete

M & L RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts

M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M & L for 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate

Supply only Liquid water proofing compound

Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation & plinth beams and similar work Rough finished surfaces of concrete flat

Form work to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat

M&L Mild steel TMT bars Above but 6 to 10 mm dia as in Stirups

M&L Mild steel TMT bars but 6 to 8 mm dia as in spacers and binder,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality -ditto- all as per Item No 20 Above

M&L Rendering 15mm thick in two coat on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) and applying WPC on second coat @ 3% by wight of cement or manufacturere instruction

M&L Rendering 10mm thick on stone masonry surfaces or surface fair face of brickwork in CM (1:3) finished even & smooth (without using extra cement) as in ceiling complete.

M & L for Hard core of Broken bricks gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface

M & L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in path and concrete surface finished even and smooth without using extra cement.

M & L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate

S & F Coloured Glazed earthenware tiles 300 x 600 x 7-8mm thick, on walls etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick plaster in CM (1:4) on fair face of brick or concrete surface

Applying three coats of white wash on new Ceiling surface including preparation of surface.

M & L 75mm thick PCC type C-1, (1:3:6) using 40mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection/Path

S&F Vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rests including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc, complete all as specified and as directed.

S&F vitreous china wash basin, white, flat back size 630x450mm excluiding taps, chain and plug including waste pipe, brackets, 32 mm dia CP coupling cutting for and pinning in ends for brackets or ercting stand complete all as specified and directed by Engr-in-Charge

S&F vitreous china urinal, half stall type, white including CP coupling waste pipe white, flat back size 630x450mm excluiding taps, chain and plug including waste pipe, brackets, 32 mm dia CP coupling cutting for and pinning in ends for brackets or ercting stand complete all as specified and directed by Engr-in-Charge

S&F 15mm bore long body bib tab, cast copper alloy, CP fancy type, with crutch or butter fly handle, screw down, screwed for iron pipe or for brass ferrule including flange

S/F pillar taps, cost copper alloy, with capstan heads, CP fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts and screwed for iron pipe and fixed to 15mm bore.

S&F tubes medium grade of 20 mm bore dia galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

S&F tubes medium grade of 25 mm bore dia galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

M&L for 1000 ltr capacity rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including all accessories specified and directed.

S&F in 20mm gun metal , globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed .

S&F in 25mm gun metal , globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed .

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 110 mm bore dia.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 75 mm bore dia.

S&F PVC (SWR) branch piece, single (singleY) equal or unqual of 110 mm bore dia.

S&F PVC (SWR) vent cowl of 75 mm bore dia.

S & F 110mm pvc (SWR) bends any radius provided with access door all as specified and directed by EIC.

S & F 75mm pvc (SWR) bends any radius provided with access door all as specified and directed by EIC.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S/F PVC connections 15mm size with brass chek nuts of length 450mm complete all as specified and as directed by Engr-in-Charge

M & L for RCC Type B1 1:2:4 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,

S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sec) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165)

M&L P.C.C 1:2:4 type B-1 as in coping including necessary form work complete complete all as specified.

M & L for Granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

M & L preparation of new plastered or unplastered surfaces and applying two coat of cement base paint on walls complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc., removing materials to store, or keeping in safe custody for re-use at site or offering credit, and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down old/ unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling/Wall fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light/fan/bell point controlled by one switch.

(b) One 5 pin socket outlet 5 Amps independent board.

(c) One 5 pin socket outlet 5 Amps on the same board with other switch.

Dito- as item no 5 above but One socket outlet 15 Amps independent with two single core 2.5 sqmm drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified and directed

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S &F switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

M & L for Switch Socket combination 2 in 1 , 5 pin, 6 Amps flush type.

S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

Supply & fixing SRCD DBOXX (socket residual current device) protected socket with steel enclosure of 25 Amp Capacity complete with all accossries and commissioning all as specified & directed by Engr-in-charge.

S & F for wall mounted LED tube light fitting 18/20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Crompton Greaves,Bajaj, Philips, Havells.

S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.

Supply and fix MCB Distribution board double door made out of CRCA mild steel sheet surfce with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface/concealed mounting TPN 4 way, 440 volts with bus bar rating 200 Amps (vertical operation) and suitble size of cable gland -02 Nos, dust and vermin proof suitable for incorporation of MCCB 4 pole 100 amps 16 kA and MCB's and making all necessary connections complete all as specified and directed at site. Note : The cost of MCCB and MCB , isolators shall be measured and paid seperately.

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete..

Supply and fix MCB single pole and neutral, 240 volts, 32-63 Amps, all as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

S&F in replacement of MCCB 4 pole, 100 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. Make : Havells/ L&T /Legrand

M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.

Sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 6 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run of conduit two run of 6 sqmm copper condictor & one run of 6 sqmm copper conductor is measured as one unit.

S&F ceiling fan 1400mm sweep complete with three blade, down rod, accessories suitable for 230 V, 50 Hz, single phase AC supply complete all as specified and directed. Make: Havells/Usha/Khaitan/ Crompton

S&F for exhaust fan pvc body, 250mm sweep, 1200 RPM with louvers shutter,single phase, 240 Volts, AC with mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes and including taking down existing fan complete all as specified and directed at site.Note: Old UNSV ceiling/exhaust fan deposit to MES store.

S&F vertical storage type electric water heater 25 Ltr capacity, steel body, copper inner tank and heating element upto 2 KW capacity, 230 Volts, BEE 5 star rated with all accessories such as safety valve, thermostate, NRV, connection piece etc, fixing on wall through proper nut, bolt, and fastner including electric and water connection and including taking down of existing fan complete all as specified and directed. Make: Havells/Bajaj/Crompton Greaves/ Racold

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured size 25 sqmm 4 core with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size complete all as specified and directed

Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed.

Returning filling including spreading levelling watering & well Ramming in layers not Exc 25 cm complete all as spfd & directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and directed.

M&L for natural local river sand for cable protection.

M&L for GI tubing 40/50 mm dia light grade with all fittings laid in trenches/making GI bracket of security lights/provn for ceiling fan ponit including bending of suitable size/support of UG cable as required at site as directed by Engr-in-Charge.

M/S MAGADH CONSULTANT

M/S VIKAS CONSTRUCTION CO.