REPAIR/ REPLACEMENT OF CERTAIN MISC REPAIRS OF EXTERNAL WATER SUPPLY INSTALLIONS AND IMPROVEMENT OF EXTERNAL WATER SUPPLY ASSESTS UNDER GE (N) PATIALA

Amount

Labour only for taking out the foot valve assembly of 30 HP to 75 HP along with connected 8 inch suction pipe after unscrewing the nuts /bolts , screws etc and reassembling after necessary repairs complete all as specified and directed . The cost of element includes the following elements, (i) Taking out the foot valve assembly from sump. ( Appx. Depth of sump 15 feet and wt appx 200 kg ) complete with suction strainer etc incl replacement of gasket and welding and lathe work if required. (ii) Reassembling the same after repair to foot valve , lowering down reassembling and testing complete all as directed. Note - Required T&P such as lifting chain – pulley block and tripod (not less than 2 ton capacity and 20 feet lifting arrangement portable type ) and other lifting arrangement shall be deemed included in quoted rate.

Taking out unserviceable foot valve incl supply, fixing and testing of new foot valve assembly suitable for 40 HP to 75 HP pump set 200 mm along with connected 8 inch suction pipe after unscrewing the nuts /bolts, screws etc all as specified and directed. Note - Required T&P such as lifting chain – pulley block and tripod (not less than 2 ton capacity and 20 feet lifting arrangement portable type ) and other lifting arrangement shall be deemed included in quoted rate.

Taking out old US cast iron Air release valve incl supply, fixing and testing of new cast Iron Air release Valves with two air outlets, conforming to IS 14845 of size 80/100 mm dia bore and fixing up in Cast Iron Water supply mains of size 200 mm dia.

Taking out unserviceable Non return Valve including supply, fixing and testing of new Cast Iron swing check type Non Return (Reflux) Valve With SS-304 Disc and Nitrile Rubber Lining. Shell Test Pressure - 24.5 Kg/cm g, Seat Test Pressure 16 Kg/cm as per IS 5312, part-I, PN 1.6 without bypass arrangement, ends flanged suitable for 200 mm bore pipe complete with nuts /bolts and washers of appropriate size and rubber gasket etc complete all as specified and directed . Make – KIRLOSKAR/L&T / VENUS / SANT/ZOLOTO

Taking down old BER Centrifugal pump only from Limb II and deposited to MES store yard including Supply, fixing and testing of new split case pump having discharge 338 m3/Hr at 40m head, WMPPL pump Model : SCP 150-390 HA, MPC- casing - CI/Impeller-CI/Shaft-SS410/Sleeve-410/Gland pack, application for clear water suitable for existing electric driven motor of 55KW of ABB Make all as specified and as directed by Engineer in charge. Make of Pump WILO MATHER AND PLATT. Note - Required T&P such as lifting chain – pulley block and other lifting arrangement and suitable size of nuts and bolts required shall be deemed included in quoted rate. Bidders are required to visit before quoting to verify the make and model of pump.

Supply and fix in replacement of contactor AC 415 volt , operating coil -230 volts , 70 amps Three pole rated capacity make – LT type MNX- 70 or equivalent complete all as specified and directed Make L&T or equivalent..

Supply and fix in replacement of contactor AC 415 volt , operating coil -230 volts , 50 amps Three pole rated capacity make – LT type MNX- 50. complete or equivalent all as specified and directed Make L&T or equivalent. .

Supply and fix in replacement of contactor AC 415 volt , operating coil -230 volts , 40 amps Three pole rated capacity make – LT type MNX- 40. complete or equivalent all as specified and directed Make L&T or equivalent. .

Supply and fix in replacement of contactor AC 415 volt , operating coil -230 volts , 32 amps Three pole rated capacity make – LT type MNX- 32. complete or equivalent all as specified and directed Make L&T or equivalent. .

Supply and fix in replacement of bimetallic over load relay range 66 to 110 Amp, 3 phase, 415 V, for electric motor upto 75 HP Make L&T or equivalent.

Supply and fix in replacement of electronic timer suitable for electric motor ST 100 35HP to 55 HP, 415V,3 phase, complete all as specified and directed Make L&T or equivalent.

Supply and fix in replacement of gen next universal LED indicator lamp of red, yellow and blue colour surface mounted device LED technonogy, low power consumption< 1W and surge and low voltage glow protection (LVGP) as per site requirement complete all as specified and directed Make L&T or equivalent.

Supply and fix in replacement of gen next universal LED indicator lamp of red and green in colour surface mounted device LED technonogy, low power consumption< 1W and surge and low voltage glow protection (LVGP) as per site requirement complete all as specified and directed Make L&T or equivalent.

Supply and fix in replacement of gen next illuminated push button flush head of red and green in colour as per site requirement complete all as specified and directed Make L&T or equivalent.

Taking down the existing paint and material and labour for pianting with two coats of synthetic enamel paint of smoke gray colour over a coat of zinc oxide in existing star delta starter pannel .complete all as specified and directed

Supply & fix in replacement of MCCB 3 Pole 415Volts 36 KA 160 Amps current capacity confirms to IS /IEC 60947-2 and IEC 60947-2 adjustable thermal fixed magnetic setting range overload/short circuit protection type complete with connected accessories including necessary connection with bus bar/out going cables all as specified and directed. of Make L&T or equivalent.

Supply only thimble Copper suitable for 50 sqmm complete all as specified and directed.

Supply only thimble Copper suitable for 70 sqmm complete all as specified and directed.

Supply only thimble Alminium suitable for 70 sqmm complete all as specified and directed.

Supply only thimble Alminium suitable for 95 sqmm complete all as specified and directed.

Supply and replace PVC insulated unsheathed copper cable of size 16 sqmm s / core 1100 volts grade confirming to IS -694/ 1990 complete all as specified and directed . Make: Havell / CCI / Finolex / NICCO / POLYCAB

Supply and replace PVC insulated unsheathed copper cable of size 25 sqmm s / core 1100 volts grade confirming to IS -694/ 1990 complete all as specified and directed . Make: Havell / CCI / Finolex / NICCO / POLYCAB

Cleaning the entire area within the fencing/ boundary wall of tubewell installations which includes cutting of bushes/shrubs/unwanted grass in the periphery/surronding of complete installation i.e O/H reservoir, Gen rooms, Clear water sumps, over head tanks, removing unwanted grass nad small bushes, triming of trees of the complete installation including sweeping of whole area and disposal of all the removed material as directed after cutting/cleaning. The plinths around the complete buildings at installation is to be maintained free from any type of grass and cleaning complete all as directed and specified by Engr in charge at Pump House area TW No 1, 2, 5,6,7,8,10,12,13, 14,15,19,20,21,22, 23, 24,BML filtration plant and TW No 3 and 09 (Rate quoted will be composite cleaning of area throughout the periodicity as an when required by deploying regular source of cleaning i.e man power and all type of T&P.).

Dismantling Butterfly valve with Gear box unit fixed with MS pipe of dia 800mm -1000mm of Filteration plant area after unscrewing the nuts / bolts, screws etc, for repair and refixing the same after necessary repairs including servicing, greasing, oiling, gears, all moving parts and replacement of burn out nuts & bolts of sluice gate of size 800 mm to 1000 mm complete all as specified and directed . The cost element includes the following elements . (Note: The labour of machine work /welding works if required shall be included in the quoted rate) Note - (a) Any defective part to be replaced shall be measured and paid separately under respective item of schedule , here in after . EIC approval shall be taken before declaring any part as defective. (b)Required T&P such as lifting chain – pulley block and tripod (not less than 2 ton capacity and 20 feet lifting arrangement portable type ) and other lifting arrangement shall be deemed included in quoted rate.

Replacement of Thrust bearing (30606) as per sample/existing model

Replacement of worm drive (screw)

Replacement of worm gear

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be put into foundation with PCC 1:3:6 or fix on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine MILITARY ENGINEER SERVICES BAKHRA WATER SUPPLY/FILTRATION PLANT GE(NORTH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be fixed in pillar of gate all as specified and as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine POWER HOUSE AGE E/M, GE(NORTH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation , complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be fixed on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine FILTERATION PLANT AGE E/M, GE(North) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be fixed on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine SLUDGE WATER SUMP CUM PUMP HOUSE AGE E/M, GE(NORH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation Make :- Havells/ Philips complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be put into foundation with PCC 1:3:6 or fix on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine CHLORINATION ROOM AGE E/M, GE(NORTH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be fixed on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine RAW WATER SUMP/VT PUMP HOUSE AGE E/M, GE(North) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be put into foundation with PCC 1:3:6 or fix on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine CLEAR WATER PUMP HOUSE AND SUMP (04 NOS) AGE E/M, GE(NORTH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be put into foundation with PCC 1:3:6 all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine RAW WATER TANK (CAP 175 LG) AGE E/M, GE(NORTH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be fixed on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine WATER SUPPLY INSTALLATION (LIMB III) AGE E/M, GE(NORTH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 4000 x 750 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 04 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing at BML installation, complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be fixed on the wall all as directed by Engr - in -charge. (c) The word on board shall be written with computrized machine WATER SUPPLY INSTALLATION (LIMB II) AGE E/M, GE(NORTH) PATIALA

Supply and install Glow sign board fabricated with GI sheet 20 SWG of size 2000 x 1000 x 200 mm frame box type made out of angle iron / conduit round pipe including wiring 23/.0076 PVC copper wire twin core and connecting to LED tube light fitting 1*20 watts- 02 Nos (Make :- Havells/ Philips) and the front side should be covered with good quality of flex sheet blue colour 3mm thick and to be mounted on square / round MS pipe and fixing layout diagram of BML installation complete all as directed. Notes:- (a) Glow sign board should openable from one side for repairs. (b) Square/round MS pipe should be fixed on the wall all as directed by Engr - in -charge. (c) The layout diagram shall be written with computrized machine.

Jawandha Enterprises

M/S Mukesh Kumar Gupta

m/s panchmukhi builders