SR TO VARIOUS TOILETS AND ALLIED WORKS AT AF STN DEOLALI

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) but exc.1.5 sqm and n exc 4 sqm each complete all as specified and directed

Taking down cement or cement lime plaster, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) Cement concrete (unreinforced)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed

Cutting holes in brick walls built in cement mortar or cement lime mortor exc half brick but n.exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed

Cutting holes in stone walls built in cement mortar or cement lime mortor exc one brick but n.exc two brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made outof 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing) complete all as specified and directed

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed second class hardwood complete all as specified and as directed

S&F Plain framed, panelled shutter second class hardwood rail and syle, 35mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

S&F Aluminium anodised,125mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F Aluminium alloy, anodised,sliding door bolt of 150mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Aluminium alloy, anodised,sliding door bolt of 250mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised complete all as specified and as directed

S&F in repairs 140mm length Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

M/Lfor two coats of Synthetic enamel paint (ordinary tint) for new surfaces of wood any description not other wise described over 10cm width or girth over pink primer including preparation of new or previously untreated surfaces all as directed.

M&L Plain cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate), 25mm thickness with WPC as in levelling course of floors etc complete all as specified and as diretced

S&F Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over and including 15 mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

S&F for coloured glazed ceramic tiles in vertical surface 300x 450x 7mm/ 350X 600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 15mm thick on brick work/stone masonary or concrete surface all as specified and directed.

M&L Plain cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate), 100mm thickness in sub base etc complete all as specified and as diretced

M&L Plain cement concrete type C1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection, path and the paving 75 mm thick laid in slope finished even and smooth without extra cement incl making joints at every 2.5 M complete all as specified and as directed

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m meanradius, built in CM 1:6 complete all as specified and as directed

M&L for stone masonary work Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed

M&L for Extra over stone walling (Granite or Trap stone) for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or broughtupto courses complete all as specified and as directed

M&L for Keyed pointing to random or polygonal rubble masonary built in CM 1:4, uncoursed or brought upto course complete all as specified and as directed

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L Rendering 5mm thick in CM 1:3 on as in ceiling of fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed

M&L Preparation of new plastered surfaces of walls and applying 3mm thick wall care putty and making the surface smooth and applying two coats of oil emulsion distemper complete all as specified and as directed

M&L preparation of new plastered surfaces of external walls and applying one coat of alkali resistant primer and two coats of cement based paint complete all as specified and directed

M&L for complete removal of existing treatment of walls by steel wire brushing, preparation of surfaces and applying two coat of distemper oil emulsion after chalk whiting complete all as specified and directed by Engineer in Charge.

M&L for complete removal of existing treatment of Ceiling by steel wire brushing, preparation of surfaces and applying three coat of white wash on ceiling complete all as specified and directed by Engineer in Charge.

S/F fixing Anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for windows/ Doors/Ventilators/Particians with one or more tracks including joining cleats/ channel for fixing glass/ mesh complete all as directed by Engr-in-Charge.

S F Anodized Aluminium powder coated (minimum thickness of powder coating 50 micron) window/ ventilators shutters having stile and rails with traingular aluminium beading of 15mm size side hung/sliding type (Two or Three track) without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified Note : Glass panes and wire mesh will be measured and paid separately

S&F sheet glass 5.5mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares exc 0.50 sqm in each pane as dircted and specified.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store for bore of pipe 15mm bore did all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store for bore of pipe 20mm bore did all as specified and directed.

S&F 15mm bore Tubes, 'medium grade' galvanised ISI marked with all fittings short pieces and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Refixing of old steel 15mm bore Tubes, 'medium grade' galvanised ISI marked with all fittings short pieces and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F 20mm bore Tubes, 'medium grade' galvanised ISI marked with all fittings short pieces and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Refixing of old steel 20mm bore Tubes, 'medium grade' galvanised ISI marked with all fittings short pieces and fixed complete to walls and ceilings or laid in floors all as specified and directed.

M&L for Cutting chases, pinning with diamond cutter in Brick/Stone masonary wall and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth.

S&F Stop valves/ Angle valves cast copper alloy (ISI marked) chromium plated screwed down high pressure with crutch of butterfly handle, screwed both ends for iron pipe or for unions 15mm bore dia in repairs complete all as specified and as directed.

S&F Stop valves consealed cast copper alloy (ISI marked) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe or for unions 15mm bore dia in repairs complete all as specified and as directed.

S & F in repairs Bib taps for 15mm bore pipe, cast copper alloy, fancy type Chromimum plated long body with wall flange fixed in repairs of Make: Jaquar,Mac and Johnson complete all as specified and as directed.

Supply and fixed in repairs vitrous china wash basin of oval type white of size 550x400mm including waste pipe, brackets and cutting for and pinning in ends of brackets or erecting stand and 32mm dia PVC waste pipe fixed in repairs including waste copling 32mm size full thread all as specified and directed by engr in charge

S&F for 15 mm bore pillar tap chromium plated long neck with aerator fancy type with crutch handle screwed down high pressure with long screwed shanks and fly nuts srewed for iron pipes or for brass ferrule fixed in repairs all as specified and directed.

Supply and fixed towel rail 20 mm dia and 600mm(between flanges) long with flanges, chromium plated all as specified and directed by engr in charge

S&F for over head shower rose & shower arm with revolving joint and 100mm dia round shaped single flow (ABS body chromium plated all fixed in repair all as specified and directed.,

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all fixed in repair all as specified and directed.,

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) all fixed in repair all as specified and directed.,

S&F 600x450 bevelled edged looking mirror 6mm thick with Design wooden frame work fitted with 6mm thick commerical ply or AC sheet backing to mirror fixed as in repair.

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap 32mm dia polyethylene fush pipe etc compete all as specified including provn of lime concrete bedding fixed in repairs

S&F in repairs Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for high/low level cistern etc compete all as specified and as directed

Supply and Fix in repairs Health faucet ABS body 15mm dia pipe with 1.25metre long PVC tube with wall hook, Chromium Plated all as specified and directed.

S&F in repairs PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600mm etc., complete all as specified and as directed

S&F in repairs Vitreous China urinals, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed

S&F Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed

S&F in repairs rotational moulded polyethylene water storage tanks 1000 lit capacity three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and including 25mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified and as directed

S&F for angular two way stop cock 15 mm bore chromium plated with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union fixed as in repairs all as specified and directed.

S&F in repairs 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium flated fancy type alloy ISI marked with crutch or butter fly handles screwed down for iro pipe of 20mm bore compete all as specified ans as directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in reairs PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

S&F in reairs PVC (SWR) bends with access door any radius 75mm bore complete all as specified and as directed

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed

S&F in repairs PVC (SWR) branch piece,110mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S&F in repairs PVC (SWR) branch piece,75mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S& F in repairs PVC (SWR) junction single,(Single T) 110mm bore with access door equal or unequal complete all as specified and as directed

S& F in repairs PVC (SWR) junction single,(Single T) 75mm bore with access door equal or unequal complete all as specified and as directed

S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repairs PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as speccified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

Dismantling ceiling board of any description fixed in any position with nails incl cover fillets/aluminium snap grid.

M&L in repairs Non asbestos fibre cement building boards 4mm thick (one side emposed design) fixed or laid/ inserted to timber/GI/Aluminium framework in ceiling with screws all as specified and as directed.

S&F Anodised aluminium snap grid frame work size 605x605mm for false ceiling including hangers 6mm dia GI (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc. complete all as specified and as directed.

S&F rolled mild steel angular/tubular/square/rectangular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)confirming to Fe-410-W (Grade E-250) quality A including distance pieces, cleats etc. complete all as specified and as directed.

S&F pre-painted galvalume zinc coating GI based corrugated steel sheet 0.5mm thick including ridge of an colour having tensile str of 550mpa as in roof covering to wall fixed with self tapping screws as complete all as specified and as directed.

Taking down carefully exsiting bitumen tar felt including plaster/exsiting PCC padding, wire brushing and cleaning of the surface of Roof,terraces including flashing and junctions of parapets/kerbs walls etc and removing the rubbish to a distance exc 500m but n.exc 1.50 km and depositing where directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crusher stone aggregate mixed with integral water proofing admixture @ 200 ml per bag of cement I,e Shali plastLW+ or STP No-1 or equivalent as in roof/roof kerb/cover concrete to water proofing finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge. (WPC shall be measured and paid separately).

M&L for Rendering 10mm thick CM 1:3 on concrete surfaces finished even and smooth using WPC liquid of Make Dr. Fixit or STP as per manufacture instruction @ 0.200 ltr in 50kg of cementcomplete all as specified and as directed by Engineer-in-Charge. (WPC shall be measured and paid separately).

Supply only liquid water proofing compound

M&L for cleaning the newly plastered surface thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30 liter per SqM confirming to IS 3384-1986. (b) 3mm thick APP polymeric mambrane minimum weighing 3 kg/sqm of M/S TEXSA Ltd or M/S TIKI Asphalt hydro stop or IWL 3 Kg/Sqm membrane (one layer) laid by torch application method with overlaps of 100mm joints of traverse direction and 75mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of company. (c) Painting With one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coat of bituminous aluminium paint @ 200ml/sqm.

Surface excavation n.exc 30cm deep and averaging 15cm deep in soft/loose soil.

Removing of excavated material n.exc 50m depositing where directed at level n.exc 1.5m above the starting point.

M&L Hardcore of gauage n. exc. 63 mm deposited spread and levelled in layers n. exc. 15 cm thick watered and rammed to a true surface

M & L for 100 mm thick plain cement concrete type C2 1:3:6 in floors and pavings as in sub-base complete all as specified and as directed.

Sand filling under floors or in foundation including watering and consolidation.

M&L Machine pressed precast concrete interlocking paver block any shape and size made of grey cement and no pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L for providing cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at level n.exc 1.5m above the starting point.

M & L for Plain Cement concrete Type D2 1:4:8 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified as directed.

M&L brick work with sub class B brick straight or curved on plan exceeding 6m mean radious built in CM 1:4 complete all as specified.

M&L brick work with fly ash bricks (old size bricks) straight or curved on plan exceeding 6m mean radious built in CM 1:4 complete all as specified.

Use and waste for Formwork to soffits of suspended slabs such as roof slabs, landing and similar work; not exceeding 200m thick (Horizontal or sloping)

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC band in walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or slopping, and similar work all exceeding 20cm wide.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for cloumns , hooking ends and binding spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for RCC M-25 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM-1:4

M&L Rendering 5mm thick in CM 1:3 on as in ceiling of fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L Preparation of new surfaces of walls and applying three coats of white wash on walls complete all as specified and as directed

S&F Steel windows or ventilators, fixed type, with glazing bars

Removal of debris obtained from demolition/dismantling upto 5km distance to outside MD land complete all as specified and as directed

S&F SFRC cover of size 1200mmX1200mmX25mm thick with edge protection MS flat 25mmX3mm of load bearing capacity 5 to 7 MT including handle, bar etc complete all as specified and as directed

Demolition of Reinforced cement concrete as in RCC OH Tank/chimne/water tapsh and the like etc., of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Pressure guniting averaging 20 mm thick in cement mortar 1:3 for soffits of slab,chajjas etc complete including application of bonding agent and applying nitozinc primer to exposer steel surface and providing necessary scaffolding and removal of the same on completion of the work all as specified and directed.

Demolition and breaking up drain pipes of dia 150 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar or in cement concrete including haunching and bedding

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting outexisting benching for and formingbranch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-l smooth finished, and reformingbenching as required

M & L for 150mm dia RCC pipes class NP2 laid and jointed complete with collars as in trenches of any depth

M & L for Concrete bed 1:3:6 type C-2 to drain pipes of internal dia 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested in

Taking down carefully old UNSV aluminum/copper point wiring (light, fan, socket power etc) on TW batten/ PVC casing Capping surface steel/PVC conduit excluding all fitting/fixtures and making good disturbed surface of wall/floor/ceiling etc to match the adjoining surfaces.

M&L for point wiring complete with two single core, PVC insulated, unsheathed multi stranded bright annealed copper conductor cable, 1.5 sqmm 1100 volts FRLS grade drawn through and including heavy duty PVC casing capping not less than 25 mm width with accessories surface mounted on walls, ceiling etc. on & including PVC box and plate for mounting switches, sockets regulators etc and one run of 1.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FR grade as earth wire and connected to common earth dully complete for the following :- One Light point controlled by one switch

All as per above item but for One Fan point controlled by one switch

All as per above item but for One 3 pint socket out let 5 Amps on independent board

S&F in repairs Switch piano flush type single pole one way 5 Amp

S&F in repairs Socket out let 2 in 1,5 pin 5 Amp flush type,

S&F in repairs ceiling rose surface type, PVC/Polycarbonate insulated body size 50x28 mm two three terminals complete all as directed.

S&F in lamp holder PVC/Poly carbonate type with back plate suitable for batten fitting SP 230 Volts complete all as directed.

Taking down carefully existing tube light fitting/fixture and making good distributed surfaces of wall/floor/ceiling etc to match athe adjoining surfaces

S&F LED light fittings fixture 10w, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermal conductive material with plastic housing, heat sink, environmental friendly having power factor > 0.95 surge protection 2.5KV energy ready to use invertar type complete all as directed

Dismantling and taking down old US main switches/MCB/DBs enclosure etc any type capacity and making good to the disturbed surfaces of wall complete all as specified and as directed by Engr-in-Charge.g

S&F sheet metal inclosure MCB SPN 4 way distribution board 240 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43 protection. Make L&T or equivalent all as specified and directed by Engr-in-Charge

S&F in repairs MCB SP 5 to 32 Amp 240 Volt B sires 10KA complete all as specified and directed by Engr-in-Charge

S&F in repairs MCB SPN 32 to 40 Amp 240 Volt B sires 10KA complete all as specified and directed by Engr-in-Charge

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead wire 4 mm fixing on wall by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-2 and CI cover with frame all as shown in electrical plate No. 5 of SSR part-I all as specified and directed

S&F Exhaust fan 230V 300mm sweep with all connection arrangement & necessary nut bolts etc including wall cutting and making good disturbed surface if necessary & connecting with flexible wire of size 23x0.0076 for connecting up to ceiling rose all as specified and directed by Engr-in-Charge. Make Havells/Bajaj/Usha

S&F in repairs street light fittings 35 watt LED energy saving environmental friendly long life versatile die cast housing with toughened glass IP 66 protection, impact resistance of IK 07 & 10 KV external SPD roadway luminaire with high power LED secondary optics and accessories fixed on existing/new GI pipe bracket fixed on building and connection with PVC copper 1.0sqmm 3 core cable etc complete all as directed. Make Havells, Phillips, Crompton wipro etc. complete all as directed by Engr-in-Chareg

Supply and lay in trenches/floor/on wall/ on surface with necessary fixing accesseries LT XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor of size 10 Sqmm 4 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

M&L & fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 63 mm dia complete with coupler, elbows, joints,& necessary space parts complete all as specified

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard soil.

Supply and lay Pipes galvanized medium class laid in trenches complete including GI fittings 50 mm bore

All as per above item but of size 25 mm bore

Supply and fix in repairs Gun metal globe or gate valve 50 mm dia with brass gate with iron wheel head, screwed both ends, for iron pipe

All as per above item but of size 25 mm bore

Cutting of exisiting DI /GI pipe line 50 to 100 dia for certaining of 25 mm GI pipe with thread, union Tee elbow complete all as specified diretced by Engr-in-Charge.

Construction of brick masonry valve pit of internal dimension 60 x 60 x 60 cm depth with sub class 'B' bricks in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:4:8) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 6 mm angle iron and 6 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, two coats of white wash on plastered surface (exposed to view) including necessary excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete all as specified and directed.

SIDDHIVINAYAK ENTERPRISES (BID ID -3196029)

R S YADAV (BID ID -3188057)

SHREE SAMARTH SERVICES (BID ID -3189997)

M/S KANNANS (BID ID -3195638)