REPAIR AND RENOVATION OF VARIOUS P.T. OF MINI MARKET NEAR B.NO. 14, SEC 33-A,NEAR B. NO.16, SEC 33C, NEAR SCO NO. 34, SEC 33-C, SEC 61,MOTOR MARKET SEC 52 and VILL. KAJHERI SEC 52, NEAR SAMAPARK CENTER SEC 43, MOTOR MARKET SECTOR43, MINI MARKET SEC43

Removing of dry oil bound distemper, water proofing cement paint/snowcem/enamel paint over walls and the like by scrapping sand papering wire brushing etc. complete. (DSR I. No. 13.91)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR I. No. 13.80)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) (NS)

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. (DSR I. No. 13.111.1)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (DSR I. No. 13.99.1)

Providing and fixing 4mm thick glass panes with putty and nails wherever required, complete in all respects to the entire satisfaction of EIC of reputed Make Saint Gobain. (NS)

Regarding terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead. (DSR I. No. 14.13)

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. (DSR I. No. 4.13)

Providing and fixing of water proofing treatment with Make polyp lasting, regular grade 2104 weighting 1.75 Kg/sqm. over surface on roof complete in all respects. (NS)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase (DSR I. No. 12.21.1)

Making Khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone aggregate 20 mm nominal size) over P.V.C. sheet 1m x1m x400 micron, finished with 12mm cement plaster 1:3 (1 Cement : 3 Coarse Sand) and a Coat of neat cement, rounding the edges and making and finishing the outlet complete (DSR I.no. 12.22)

Replacement and fixing CP grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole (NS)

Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length 15 mm nominal bore (DSR I. No. 18.21.2.1 )

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter (DSR I. No. 12.41.2)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White. (DSR I. No. 17.18.1)

Replacement by providing and fixing in place of old defective/unserviceable hand dryers including cost of wiring, nut bolt etc. complete in all respects. (NS)

Providing and fixing of 8mm dia CP/SS jet with flexible tube upto 1 mtr long with SS Triangular plate to European Type WC of quality and make as approved by EIC. (NS)

Replacement of old/damaged seat cover of approved make including cost of nut bolt etc. complete in all respects. (NS)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore (DSR I. No. 17.18.1A)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 32 mm dia (DSR I. No. 17.28.1.1)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR I. No. 8.31)

Replacement and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (DSR I. No. 17.2.1)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR No.17.1.1)

Providing and fixing sanitary napkin vending machine, incinerator, Battery and happy days pad complete in all respects. (NS)

Providing and fixing and installation of vantialtion exhaust fan 300mm with frame, nut, bolt etc make khaitan, Havells complete in all respect as per the satisfaction of engineer in charge. (NS)

Providing and fixing and installation of ceiling fan 48" make khaitan, Havells complte in all respect as per the satisfaction of engineer in charge. (NS)

Providing and fixing LED Tubelight complete in all respects.Make: Havells/Phillips. (NS)

Providing and placing PVC POT (Gamla) Size 18",12" dia Green in colour including decoretive plant. (NS)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (DSR No. 9.100.1)

Providing and fixing of Chrome plated stainless steel grab rail for disabled person in Toilet Block in all complete respect at height 2'6" with minimum clearance 2" from wall/washbasin (NS)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (NS)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : (DSR I. No. 19.2.2)

150 mm diameter S.W. pipe

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions (DSR I.no. 19.19.1.1)

Providing and fixing of laminated sun sign board Material for indication of various sign bad in toilet Block of Size). (NS)

(Direction Boards) size 9” x 12”)

Notice Board (1 ½” x 1”)

Providing and fixing of MS Hardware Kundi, handle, hinges, kabza including cost of nut bolts and electric rods charges, generator set charges, welding and finishing with good quality point (Two coats) complete in all respects. (NS)

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand ). (NS)

Providing and fixing 50 watt LED flood light with bracket outside on the wall complete in all respects. (NS)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (DSR Elect. I. No. 1.24)

15/16 A switch (DSR Elect. I. No. 1.24.3)

6 pin 15/16 A socket outlet (DSR Elect. I. No. 1.24.5)

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (DSR I. No. 14.79)

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. (DSR I. No. 17.70.1)

Providing and fixing of wash basin pillar cock of jaquar make complete in all respect. (NS)

Providing and fixing the louvers complete with frame for exhaust fan of 9" diameter. (NS)

Providing and fixing of MS sheet with MS rod fixed direction board fully painted and remarks on it complete in all respects. (NS)

Providing and fixing of liquid soap dispensors in washbasin area as per direction of EIC. (NS)

Providing and fixing of Tissue papers in washbasin area as per direction of EIC. (1pkt. Includes 50 pulls) (NS)

Repair of aluminum door by dismantling and refixing horizontal vertical rails, new finger, tower bolt, handle , aluminum beading and rubber gasket etc complete in all respect (Approved rate as per EEMCPH-1 Office Memo No. 3686 dt. 31.05.2022) (NS)

Providing and fixing of Plastic Mug (1.5 Ltr.) (NS)

Providing and fixing of Small dustbin (Plastic) 8 Ltr. (NS)

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms. (DSR I. No. 17.75)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453 x 357 cm. (DSR I. No. 17.32.2)

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms. (DSR I. No. 18.54.2)

Repair and replacement of electric wiring paints by replacing of modular switch/shocket, modular plates, with box including the cost of 1.5mm² copper wire and labour complete. (NS)

Credit against old material. (NS)

Please Enable Macros to View BoQ information