REPAIR TO WOODEN JOINERY ALUMINIUM JOINERY WALL PANELLING WOODEN FLOORING CEILING AND GLAZING WORKS IN VARIOUS TECH AND ADM BUILDINGS AT AF STATION LEH UNDER GE (AF) LEH

Amount

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description not exceeding 1 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.

Plain, solid, straight chowkhats & frames of 2nd class HW wrought, framed rebated on the solid, rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkhat & treated with coal tar ,complete all as specified and directed by Engineer-in- Charge.

30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, covered with 1.25 mm thick decorative type laminate on both sides of shutter, complete all as specified and directed by Engineer-in-Charge Note : Colour and design of laminates all as approved by GE

30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats,complete all as specified and directed by the Engineer in Charge.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge

30 mm thick (Batten thickness) 2nd class hard wood Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to, complete all as specified and directed by the Engineer in Charge.

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 180 of SSR Pt-II ,complete all as specified and directed by the Engineer in Charge.

Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with Particle Board Core, supplying and fixing in frame at site as per specification and drawings shown on page No.181 in section 8 of SSR part -II ,complete all as specified and directed by Engineer-in- Charge.

Anodised aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engineer-in- Charge.

Anodised aluminium frame partition wall with one or more rebates including necessary joining cleats, glazing clips, ruber neoprene packing,anodised aluminum snap beading screws etc including joining cleat for fixing etc. in and including dismantling old partition, complete all as specified and directed by Engineer-in-Charge. Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Aluminium Anodised door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, 3 hinges, anodised aluminium snap beading screw etc for fixing of Glass or baord , complete all as specified and directed by Engineer-in-Charge Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Anodised aluminium window and ventilator shutters, fixed type without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engineer-in-Charge. Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1-No.), complete all as specified and directed by Engineer-in-Charge

Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with suitable screws, including cutting the grill to proper opening size of fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement , complete all as specified and directed by Engineer-in-Charge

Pre-laminated particle board 9mm thick , interior grade, pre-laminated both side with decorative choice laminaton fixed with screws to timber frame work, as in doors or partitions, complete all as specified and directed by Engineer-in-Charge

Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by Engineer-in- Charge.

Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane and sheet glass is ground or obscured or frosted, on one side, complete all as specified and directed by Engineer-in- Charge.

Butt hinges medium weight (ISI Marked) cold rolled mild steel and fixed of size of hinges100 mm ,complete all as specified and directed by the Engineer in Charge.

Butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size of hinges100 mm, complete all as specified and directed by Engineer-in-Charge

Extruded aluminium alloy handles of size 150 mm, fabricated type anodized ,complete all as specified and directed by Engineer-in- Charge.

Aluminum alloy, anodized, sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250mm, bolts not less than 12mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge.

Aluminum anodizes barrel tower bolts of extuded section and fixed of 100 mm long size (length of bolt), complete all as specified and directed by Engineer-in-Charge

Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm long size (length of bolt), complete all as specified and directed by Engineer-in-Charge

Aluminium Mortice lock,vertical type, size 65 mm, complete all as specified and directed by Engineer-in-Charge

Aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3, universal type, suitablefor door shutters of upto 1000 mm in width and of weight between upto 60 kg and fixed, complete all as specified and directed by Engineer-in-Charge

Aluminium door Stoppers fixed in and including taking down old door stopper, complete all as specified and directed by Engineer-in-Charge

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed by Engineer-in-Charge

Preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified and directed by Engineer-in-charge.

Second class soft wood in Scantling in and including taking down old and decayed timber, complete all as specified and directed by Engineer-in-Charge

Second class soft-wood Plain,of sectional area exc 13 & n exc 25 Sq.cm fillets square, rectangular or triangular in section clean sawn, secured with nails or brads in and including taking down old and decayed timber, complete all as specified and directed by Engineer-in-Charge

Pre-laminated particle board 8-9 mm thick , interior grade, pre-laminated one side with decorative choice laminaton and other side balancing white lamination fixed with screws /nails to timber frame work / fixed in metal frame with and including aluminium snap beading in and including taking down old unservicable board, complete all as specified and as directed by Engineer-in- Charge.

Readymade soft wood wall panelling in strips of 100mm width 9-10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction in and including taking down old and decayed wooden boarding /panelling of any description, complete all as specified and directed by Engineer-in-Charge Note : Colour and design all as approved by GE

Readymade soft wood ceiling panelling in strips of 100mm width 9-10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction in and including taking down old and decayed wooden boarding of any description, complete all as specified and directed by Engineer-in-Charge Note : Colour and design all as approved by GE

HDF based laminated wooden flooring of planks of size 1.20m x 0.198m x 8 mm thick non glue laminated flooring including 0.6 mm PE poly moisture foam as in underlay barrier of overlapping 20 cm fix them with adhesive tape, boarding fix in floating manner based tongue and groove interlocking arrangement including taking down old and decayed wooden boarding of any description ,complete all as specified and as directed by Engineer-in- Charge. Note : Colour and design all as approved by GE

Prefex sheet of 2.8-3 mm thick fixed to wooden /metal frames with screwsin and and including taking down old broken sheets from the frame, complete all as specified and directed by Engineer-in-Charge

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Ceiling with exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid in and including taking down old existing ceiling boards any thickness including cover fillets with ceiling grid, complete all as specified and directed by Engineer-in-Charge.

Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, glazed with putty or fixed with beads in and including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge.

Sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, glazed with putty or fixed with beads in and including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge.

SS Coated Premium quality Curtain Rails of 20 mm dia in and including fixing of brackets, stops, Side and End Caps, complete all as specified and directed by Engineer-in-Charge Note :- Designand colour will be as approved by GE

Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents

k.s.construction

NEHA BUILDERS