MAINTENANCE OF ANGANVADI BUILDING AT KILKUNDAH

Earthwork excavation and depositing on Bank for open excavation within initial lead of 10mt and lift of 2mt of all soil except rock etc., complete complying with standard specification.

Earthwork excavation for Foundation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete asper standard specification. as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10

P.C.C.1:4:8 mix using 40mm metal and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Plain Cement Concrete 1:3:6 Mix (one part cement, three part sand and six part of aggrigate) using 40% of 40mm size and 60% of 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specification

P.C.C.1:2:4 mix using 20mm metal and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Dismandling the existing damaged brick work and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Dismandling the existing damaged AC sheet roof and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required.

Brick work in cm 1:5 using country brick and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Plastering in cm 1:5 to 12mm thick and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Supply and fixing of steel door and windows the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

White washing two coats using best shell lime and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Painting over old Plastered surface using best quality of Emulsion Paint two coats using best exterior emulsion and the rate including all cost and conveyance of materials and labour charges etc., complete.

Painting over iron works and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification