Renovation of Pyt Ghar at Changi under B2V3

Amount

Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etccomplete.

Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge:In cement mortar

10cm thick (average) mud phaska of damped brick earth on roofs laid toslope consolidated and plastered with 25 mm thick mud mortar mixedwith bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1clay: 1 cow dung) and covered with specified tile bricks grouted withcement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral waterproofing compound by weight of cement and finishing neat.With common burnt clay (non modular) brick tiles of classdesignation 10.0

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarsesand: 4 stone aggregate 10 mm and down gauge), including finishing withcement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Painting top of roofs with bitumen of approved quality at 17 kg per 10sqmimpregnated with a cost of coarse sand at 60 cudm per 10 sqm includingcleaning the slab surface with brushes and finally with a piece of clothlightly soaked in kerosene oil completewith residual type petroleum bitumen of grade VG-10

Earth work in excavation in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth including all leads, lifts & carriage of material by MT / H.L.

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone )40 mm nominal size

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in : mud mortar

Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15 mm thick cement plaster in 1:4 mix

12 mm thick cement plaster in 1:4 mix

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. Second class deodar wood.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for: suspended floors, roofing etc

edges of slab below 20 cm wide

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shadeslaid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. completeSize of tile 500x500 mm

Tile work in skirting, risers of step and dedo upto 2 metre height, over12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) andjointed with grey cement slurry @ 3.3 kg/sqm, including pointing inwhite cement mixed with pigment of matching shade complete.8 mm thick

Finishing walls with 100% Premium acrylic emulsion paint having VOCless than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additivesNew work (Two or more coats applied @ 1.43 litre/10 sqm. Over& including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade, one or more coats on old work.

Carriage of material from the source to the site of work Sand/ Bajri average lead of 8 km MT

Providing and fixing CIB of approved size by way of making foundation in M10, Brickwork in 1:6 cement mortar including plastering with 1:4 cement mortar, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete job.

LEKH RAJ

M/S DALEEP SINGH GOVT CONTRACTOR

Parveen Kumar Govt. Contractor

Kushal Singh

JHANDA RAM

Surender Singh